Hey Dan!...I love this stuff man, believe it or not I was never like this growing up...I basically taught myself, just jumping into projects and not afraid to screw up (which I've done my fair share of 🤣)...thanks for supporting the channel!
Great video. The wiring explanation really helped out a lot. I ended up putting mine in the bed of my 2022 Tundra Limited TRD OR under a tonneau cover cassette and will build a small protective case. Love having the ignition source connected so it goes right to the preset. Thanks for the 2022 Tundra videos.
Thanks again for both videos! Very easy to follow while installing mine. Only hick up I bought the smaller air compressor and had to drill/install on frame. Horrible! Returned it to get same one you have. So tomm I’ll be putting on this compressor while watching your video! Thanks!
0 seconds ago Great video, excellent, detail Sped up my install time huge Question What is the biggest tire I can run with no rubbing on a stock, no lift 2023 hybrid limited? Thx
Thanks man!...yea for sure, glad you mentioned those, I've used em at least 2-3 times already!...and I can't wait to get that switch panel done, I have a few projects that I can't do until I finish that one! 🤣🤦♂️
great video and well done. I just got a 2024 Tundra 1794 and think i may need to add the air leveling bags as i think my boat will make it squat. I have heard that adding these can void the factory warranty is that true? I do not need the compressor as I do not tow very much so just the air bag install. Have you heard that adding them will void the warranty?
Thanks Greg, I appreciate it!! No sir, these wouldn’t void your warranty. If something went wrong with your truck they have to prove that an aftermarket part caused it, I can never remember the name of it but there’s a law that protects vehicle owners in that manner. Hope that helps!
Hopefully my 1794 Allocation will come some day. And i want TRD but as i'll be towing a trailer i plan to add the bags - am i correct then looking at your diagram you'll only have ONE MANUAL FILL valve now after this is done? I've heard where some bags will only fail one side, and seems like this would cause both to go if that's the case? Thanks for all your videos
Does this compressor manufacture make a mountable compressor like that for tire inflates after airing down? I was previously thinking under the hood mount. But this is a great mounting place
Thanks man, I appreciate it!...and highly recommend the new Gen, love this thing!...that piece on the door is actually something I made, it's a grip to close door so my kids keep their Cheeto covered fingers off my paint! 🤣🤣🤣...I have a video on the channel showing them, never expected them to be so popular but I've made a bunch for viewers who wanted a set!
Ho! Have the trd pro! Just installed falken 35s with stock suspension. Following ur footsteps! :-) 👍🏼 Have a question! I have a retrax aluminum series, bliiebars bed racks and ikamper on the bakc of the truck. Should i just change the coil springs to a stronger rated ones or do u recommend air lift suspension? And also i know tundras come with air suspension on 1794 and capstone! Do u know which brand they use? And are the toyotas air suspension on those trim levels good quality?
Noice!...congrats on the truck, I freakin love the Pro!... it's funny you ask, although I already have the airbags I'm considering upgrading my springs as well… I have a bed rack on the way and I will also be adding a tent on top so there will be some serious weight on the back of the truck… I'll keep you posted on what I decide and go with, but for now I love the airbag set up! As far as Toyotas air suspension, I hear some people say they love it and some people say they aren't a fan… That was one option I had no interest in, I like the set up I have now because I have complete control over the bags at any given time… If you go with bags, I would highly recommend the set I'm running… Zero complaints with them!... I would also recommend the wireless compressor I have on the truck, it's so convenient to be able to adjust on the fly using the app on your phone!
that is a lot of money and trouble to avoid occasionally going to the back of the truck with $100 battery operated compressor. Also, when both bags are linked, when you lean into a turn with a load, it exacerbates the lien by pushing the air out of the bag into the other.
Hahaha...I know right?!...this new truck takes up just about all my free time!...and when I do get on the boat, I just wanna relax and fish, and leave the camera at home! 🤣
Man you are unbelievable!! All this stuff that you are able to do, I just change the cabin air filter and it’s all I can handle:)
Hey Dan!...I love this stuff man, believe it or not I was never like this growing up...I basically taught myself, just jumping into projects and not afraid to screw up (which I've done my fair share of 🤣)...thanks for supporting the channel!
Man you got me rethinking my entire Tundra TRD Pro game plan! My wife is gonna hate you though! 😂
Thanks!
No prob, thanks for watching!
Great video. The wiring explanation really helped out a lot. I ended up putting mine in the bed of my 2022 Tundra Limited TRD OR under a tonneau cover cassette and will build a small protective case. Love having the ignition source connected so it goes right to the preset. Thanks for the 2022 Tundra videos.
Thanks again for both videos! Very easy to follow while installing mine. Only hick up I bought the smaller air compressor and had to drill/install on frame. Horrible! Returned it to get same one you have. So tomm I’ll be putting on this compressor while watching your video! Thanks!
I will be eventually installing one of these. I will definately be following your videos for the install. Thanks!
No prob, thanks for watching!...glad it was helpful!
0 seconds ago
Great video, excellent, detail
Sped up my install time huge
Question
What is the biggest tire I can run with no rubbing on a stock, no lift 2023 hybrid limited?
Thx
Nice man! Can't wait to see the switch panel install too 😎. Glad you're getting use of those push pin zip ties. 👍
Thanks man!...yea for sure, glad you mentioned those, I've used em at least 2-3 times already!...and I can't wait to get that switch panel done, I have a few projects that I can't do until I finish that one! 🤣🤦♂️
Are you able to r8n an auxiliary line for cleaning, inflatables, etc? Or do you need an additional storage tank??
Very well detailed as always. Well done and greatly appreciated! Keep up the great work.
Thank you, I appreciate all the support!!
Excellent instructions. 👍
Great work
great video and well done. I just got a 2024 Tundra 1794 and think i may need to add the air leveling bags as i think my boat will make it squat. I have heard that adding these can void the factory warranty is that true? I do not need the compressor as I do not tow very much so just the air bag install. Have you heard that adding them will void the warranty?
Thanks Greg, I appreciate it!! No sir, these wouldn’t void your warranty. If something went wrong with your truck they have to prove that an aftermarket part caused it, I can never remember the name of it but there’s a law that protects vehicle owners in that manner. Hope that helps!
Hey man. How do these change the ride of the TRD Pro? I’m worried about compromising ride quality by installing them. Thoughts?
Hopefully my 1794 Allocation will come some day. And i want TRD but as i'll be towing a trailer i plan to add the bags - am i correct then looking at your diagram you'll only have ONE MANUAL FILL valve now after this is done? I've heard where some bags will only fail one side, and seems like this would cause both to go if that's the case? Thanks for all your videos
Excellent video thanks for sharing
Thank you sir, I appreciate that!
Does this compressor manufacture make a mountable compressor like that for tire inflates after airing down? I was previously thinking under the hood mount. But this is a great mounting place
I don't believe so unfortunately, their kits are made for air bags from what I see on their site...thanks for watching!
Nice Video, Now I'm going to have to buy a Tundra . 😃What's that orange block on the door at 33:55?
Thanks man, I appreciate it!...and highly recommend the new Gen, love this thing!...that piece on the door is actually something I made, it's a grip to close door so my kids keep their Cheeto covered fingers off my paint! 🤣🤣🤣...I have a video on the channel showing them, never expected them to be so popular but I've made a bunch for viewers who wanted a set!
Ho! Have the trd pro! Just installed falken 35s with stock suspension. Following ur footsteps! :-) 👍🏼
Have a question! I have a retrax aluminum series, bliiebars bed racks and ikamper on the bakc of the truck. Should i just change the coil springs to a stronger rated ones or do u recommend air lift suspension? And also i know tundras come with air suspension on 1794 and capstone! Do u know which brand they use? And are the toyotas air suspension on those trim levels good quality?
Noice!...congrats on the truck, I freakin love the Pro!... it's funny you ask, although I already have the airbags I'm considering upgrading my springs as well… I have a bed rack on the way and I will also be adding a tent on top so there will be some serious weight on the back of the truck… I'll keep you posted on what I decide and go with, but for now I love the airbag set up!
As far as Toyotas air suspension, I hear some people say they love it and some people say they aren't a fan… That was one option I had no interest in, I like the set up I have now because I have complete control over the bags at any given time… If you go with bags, I would highly recommend the set I'm running… Zero complaints with them!... I would also recommend the wireless compressor I have on the truck, it's so convenient to be able to adjust on the fly using the app on your phone!
that is a lot of money and trouble to avoid occasionally going to the back of the truck with $100 battery operated compressor. Also, when both bags are linked, when you lean into a turn with a load, it exacerbates the lien by pushing the air out of the bag into the other.
Will this kit works for 2020 Tundra? Thanks
Yes sir, I have a video of the install on my 2020 Platinum here on the channel!
You need to rename the channel to Nitro Z18 "Truck Shop"......i dont see anymore fishing around this channel.😆
He's to busy editing videos.
Hahaha...I know right?!...this new truck takes up just about all my free time!...and when I do get on the boat, I just wanna relax and fish, and leave the camera at home! 🤣
Is your truck lifted?… And you have airbags
No lift yet, stock TRD Pro suspension...Im running the AirLift 5000 Ultimates