Corsair 5000D Airflow vs NZXT H7 Flow RGB - which is the best mid-tower case?
HTML-код
- Опубликовано: 30 июн 2023
- Here I'm comparing the Corsair 5000 Airflow RGB with the NZXT H7 Flow RGB. These are two interesting RGB cases with a focus on airflow. They're quite a bit different and so I thought it might be fun to show the differences between them.
If you'd like to see more about each then be sure to checkout these videos
NZXT H7 Flow RGB build guide • NZXT H7 Flow RGB build...
Corsair 5000D RGB Airflow • How to build a mega RG...
NZXT H7 Flow RGB:
Please note links listed here include affiliate links which may earn me a commission. Find out more below.*
Amazon US - amzn.to/3JCTYCf
NewEgg - newegg.io/nca49ecf26
Best Buy - bestbuy.7tiv.net/NkQZeK
Amazon UK - amzn.to/3JD6u4s
Amazon FR - amzn.to/3r9y5E8
Amazon IT - amzn.to/3NtJZQN
Amazon DE - amzn.to/3JFsADo
Amazon CA - amzn.to/3PAGmei
Specs of the NZXT build:
Case - NZXT H7 Flow RGB • NZXT H7 Flow RGB build...
Motherboard - Gigabyte Aorus Z790 Elite AX • Gigabyte Z790 Elite AX...
CPU - Intel Core i5-13600K
RAM - Crucial Pro 32GB Kit (2x16GB) DDR5-5600
NVMe SSD - Corsair MP600 GS ( • How to install and set... )
PSU - Corsair RM1000e PSU ( • Corsair RM1000e PSU un... )
GPU - Gigabyte RTX 4070 TI 12G OC • Gigabyte RTX 4070 Ti 1...
Fans - NZXT Core RGB ( • How to connect NZXT F1... )
AIO cooler - NZXT Kraken Elite 280mm • NZXT Kraken 280 Elite ...
Specs of the NZXT H7 FLOW RGB case:
Motherboard Support:Mini-ITX, Micro-ATX, ATX
Enclosure Type:Mid-Tower
Case Material (White):SGCC Steel, Ultra-clear Tempered Glass
Case Material (Black):SGCC Steel, Dark Tinted Tempered Glass
DIMENSIONS
Height (With Feet):505mm
Height (Without Feet):480mm
Width:230mm
Depth:480mm
Weight:10.57kg
COMPATIBILITY & CLEARANCE
Max CPU Cooler Clearance:Up to 185mm
Max GPU Clearance:Up to 400mm
Front Radiator Clearance:60mm
Top Radiator Clearance:30mm
Cable Management:18-22mm
PSU Clearance:Up to 200mm
FRONT I/O PORTS
USB 3.2 Gen 1 Type-A:2
USB 3.2 Gen 2 Type-C:1
Headset Audio Jack:1
EXPANSION SLOTS
Standard:7
Vertical:0
DRIVE BAYS
2.5":4+2
3.5":2
FAN SUPPORT
Front:3 x 120mm / 3 x 140mm (3 x F Series RGB Core 140mm included)
Top:3 x 120mm / 2 x 140mm
Rear:1 x 120mm / 1 x 140mm (1 x F Series Quiet 140mm (Case Version) included)
Filters:All Air Intakes
RADIATOR SUPPORT
Front:Up to 360mm with Push/Pull
Top:Up to 360mm
Rear:Up to 140mm
FAN SPECS
Model:F140 RGB Core Fan (Case Version)
Speed:1200 ± 120 RPM
Airflow:61.74 CFM
Static:2.06mm-H2O
Noise:29.05 dBA
Fan Connector:3-pin
FAN SPECS
Model:F120Q (Case Version)
Speed:1200 ± 240RPM
Airflow:62.18 CFM
Static:1.05 mm - H2O
Noise:25.1 dBA
Fan Connector:3-pin
Corsair 5000D RGB Airflow
Specs of this Corsair PC build:
Motherboard - Gigabyte X670 Gaming X AX • Gigabyte X670 X Gaming...
CPU - AMD Ryzen 7 7700X
Case - Corsair 5000D White RGB ( • How to build a mega RG... )
Fans - Corsair AF120 RGB Elite Fans ( • How to connect and set... )
CPU cooler - Corsair H150i Capellix XT ( • Corsair H150i Elite Ca... )
Display - LCD upgrade kit ( • Upgrade your Corsair E... )
RAM - Corsair Vengeance RGB DDR5 16GB x 2 6200MHz
NVME - Crucial T700 PCIe Gen 5 SSD, Corsair MP600 XE ( • How to install and tes... )
PSU - Corsair RM Shift Series 1000X Shift ( • Corsair RMX shift PSU ... )
Cables - Corsair Premium sleeved cable kit type 5
Lighting - Corsair LC100 lighting panels ( • Corsair LC100 Lighting... )
GPU - Gigabyte RTX 4070 Ti 12g OC • Gigabyte RTX 4070 Ti 1...
Specs of the case:
Case Height 520
Case Length 520
Case Width 245
Color BLACK
Case Size NA
Radiator Compatibility 120mm, 140mm, 240mm, 280mm, 360mm
Case Window Tempered Glass
Compatible Liquid Coolers H55, H60, H75, H80i, H90, H100i, H105, H110i, H115i, H150i
Case Warranty 2 Year
Internal 3.5" Drive Bays 4
Internal 2.5" Drive Bays 2
Maximum CPU Cooler Height 170
Maximum PSU Length 250
Case Front IO (1x) USB 3.2 Gen 2 Type C, (2x) USB 3.2 Gen 1 Type A, (1x) Audio in/out
Case Drive Bays (x2) 3.5in (x4) 2.5in
Maximum GPU Length 400
Weight 12.4
Case Expansion Slots 7 vertical + 2 horizontal
Case Power Supply ATX
🏆Big thanks to my super awesome RUclips members:
SirSpawnsALot, Meatykeyboard, Rawrr483, Aaron Yarden, Space Cannons, Riggs79, Mike S, Jay Shank 007, Jason Morgan, Starastin, Charles Latrom, McFarty, Chief Hao, Kraken Tortoise and Megan Schafer.
📸 Recorded with amzn.to/3kYrhGP
PLEASE NOTE
Affiliate links*:
Disclosure: Shopping links within the description of this video generate a commission at no extra cost to you. These are added for your convenience but other retailers are available. As an Amazon Associate I earn from qualifying purchases.
Products:
Products featured may also have been sent for free for review/testing purposes. Often these have to be returned by me, but not always. I endeavour to avoid bias in my videos wherever possible and try to give honest, subjective opinions. 
Игры
Specs of the NZXT build:
Case - NZXT H7 Flow RGB ruclips.net/video/hiLd5wTPuMI/видео.html
Motherboard - Gigabyte Aorus Z790 Elite AX ruclips.net/video/8WK7VmuxFxo/видео.html
CPU - Intel Core i5-13600K
RAM - Crucial Pro 32GB Kit (2x16GB) DDR5-5600
NVMe SSD - Corsair MP600 GS (ruclips.net/video/8DTAiS5pPPs/видео.html)
PSU - Corsair RM1000e PSU (ruclips.net/video/FUnfuF6nSVw/видео.html)
GPU - Gigabyte RTX 4070 TI 12G OC ruclips.net/video/_-bu6qDqeWA/видео.html
Fans - NZXT Core RGB (ruclips.net/video/mPRrPGjV_jo/видео.html)
AIO cooler - NZXT Kraken Elite 280mm ruclips.net/video/G5r3SG3ACwE/видео.html
Specs of this Corsair PC build:
Motherboard - Gigabyte X670 Gaming X AX ruclips.net/video/LYD5zUL91N0/видео.html
CPU - AMD Ryzen 7 7700X
Case - Corsair 5000D White RGB (ruclips.net/video/w-_g7inHcX4/видео.html)
Fans - Corsair AF120 RGB Elite Fans (ruclips.net/video/eEeMzFHxtWw/видео.html)
CPU cooler - Corsair H150i Capellix XT (ruclips.net/video/VYgWCVMOQfE/видео.html)
Display - LCD upgrade kit (ruclips.net/video/z0jDMVooE38/видео.html)
RAM - Corsair Vengeance RGB DDR5 16GB x 2 6200MHz
NVME - Crucial T700 PCIe Gen 5 SSD, Corsair MP600 XE (ruclips.net/video/B08Cv8Pb9nI/видео.html)
PSU - Corsair RM Shift Series 1000X Shift (ruclips.net/video/yafbKAuyntw/видео.html)
Cables - Corsair Premium sleeved cable kit type 5
Lighting - Corsair LC100 lighting panels (ruclips.net/video/vDO95ghARJE/видео.html)
GPU - Gigabyte RTX 4070 Ti 12g OC ruclips.net/video/_-bu6qDqeWA/видео.html
I got the H7 for my build because it’d been many many years since i built pc. Their ecosystem of parts made it easy for me to jump back in. Now i’m feel more confident to branch out. I really like that corsair case with all of its options. Nice to see manufacturers stepping outside of the box like that.
I currently have the 5000D and it is a good case, it has a lot of space and the truth is that it is very easy to clean it and put as many fans as you want, but the only reason I ended up opting for Corsair and not for the H7 Flow from NZXT is for the pwm adapter, although my board has connectors for the pwm it only has 3 and instead I have 6 ml elite fans so it was crucial for me. I just have to add that the only awkward thing about the 5000D is the part where I put the 24-pin cable and the sata since you have to remove that side cover to better manage that cable ... it is somewhat tedious to unscrew the fan cover and then sscar just finished the end cap for that, something that I see in the h7 flow as more practical and simple in cable management, for the rest, excellent cabinet, good construction materials and better air flow, in Peru I bought it for 186 dollars in Compared to the 200 dollars that I was going to pay for nzxt that I had to import it paying taxes included, it came out a little more. Good video 👌.
Both good cases, however, there's a significant price difference between them. H7 Flow seems to be the best bang for the buck between the two and temps will be more than fine. Swap those fans with an Arctic P14 PWM kit and you'll get even better results and still pay less than what the 5000D costs.
Montech Air 903 is a little bit cheaper than the NZXT H7 Flow, with similar airflow, and fan support
I would love to see a comparison between the 5000D and the H9 flow
I've had the Corsair 5000D for 2 months now and I have no complaints about it.
Excellent
Good video. I would appreciate if you put one next to another to compare sizes. Cheers.
Thank you for the excellent in depth video about these cases I'm highly sold on the 5000D for my next build.
Glad to help. Hope you enjoyed enough to subscribe 🦐
I recently built a PC in the Corsair 5000D RGB (using your video as a guide because my case didn't come with a manual!) It's a great looking case with lots of airflow, but there are some cons. I found the extra back door wasn't really necessary as I couldn't close it anyhow due to all the cable and hub clutter. Case manufacturers could stand to make the cases a little wider to accommodate cables. Because there were fan and RGB hubs pre-mounted, there wasn't a good place to put the iCUE Commander Core that came with the AIO I got. (I wanted my SSDs in the back of the case.) It would also be nice to be able to move the top AIO radiator more toward the front side panel to allow more clearance for the CPU power cables. I wasn't able to put all three AIO fans inside the case because of the CPU 8-pin connectors being in the way, so it's good that you can mount the top fans outside the case.
Do I have to connect the 5v to the mobo or could I just use the nzxt rgb controller
Howd you get the temps and gif to work at the same time om the kraken?
Its driveing me nuts, everywhere i look the new 5000d in white comes with a fogged glass side panel, is the glass panel you are useing here the one thta it comes with? and with only a handfull of cases supporting mondern frontpanel IO is doesnt help. also the spaceing between a top rad and the CPU power connectors on the top right for the 5000d. how is the spaceing there??
Hi, will i have to remove the HDD cage if I install a 360 rad in the front of the NZXT (so it'll be similar to your setup here except that my rad is 360)?
How goof the airflow is in 5000x compared to 5000d , h7 flow and o11 evo
Corsair 5000 vs lancool 216? 👀
Hello! I want to install a 140mm fan on the rear of corsair5000d and i dont know how...it fits but the holes are for 120mm...what can i do? Drill new holes ?
The 5000d only fits a 120mm fan in the back. Yeah you would have to drill if you really want a 140 there.
@@bashfullJ88 drilling was easy ,i put a 140 and a 60 under gpu
Does the NZXT H7 have a dust filter under the front mesh panel? Great video thanks !
Yes it has a front removable dust filter.
Along with these 2 cases, I really like lian li lancool iii. This is so confusing now. Any suggestions would be good.
ruclips.net/video/5PV6p5osFDE/видео.html
nice ty
i broke the glass on my 5000d airflow, and corsair doesnt ship in my country, the stores here sell the panel for half the price of the case.. guess ill be buying the h7
my 5000d is only 2 months old, I guess rent can wait this month
Was that really Corsair's answer?
Hello, sorry, I have a doubt since I don't know how to read or listen in English, I would like to know which was better in the end, I'm undecided between The h7 flow and Icue corsair 5000D, I would like to know which is better quality, the price doesn't matterWhich one do you recommend? Use the translator, sorry
He liked the Corsair 5000D more because of the flexibility and more build options it provides. However the NZXT H7 is easier to build in because it is a simpler case. Both cases are good.
Guys, Is there any differences between H7 Flow RGB and H7 Flow except fans?
RGB gets 4 RGB fans and an RGB controller. Flow gets two non-RGB fans only. Nothing else different. If you want RGB on your build you are better off buying the flow case and then swapping in your own fans in my opinion.
@@dena8473 Thanks for the answer. I will probably get regular H7 Flow, don't need RGB. Could you recommend me 120mm and 140mm NonRGB fans which are silent and have good cooling performance?
👍Firstly, thanks for the excellent video; I'm on the fence with these two cases, but, especially after watching this video, I've decided to go with the H7 as it has everything I'm looking for and is half the price of the 5K, too. Plus, I can't seem to find a non-RGB version of it, either, and I utterly detest RGB for the most part (unless tastefully and sparingly done). I think illumination of that kind should stay where it belongs... in Blackpool! 😆
Secondly, and possibly most importantly, I have to thank you for pronouncing it as N *_ZED_* XT! The amount of YooToobers I hear from this side of the pond saying it in the Septic way is nuts, and it _really_ grates. 😬😄
I say N Zed XT just to wind up the Americans. But they rarely say anything about it 😂😂
I have RGB too, just for bathtub too
An Asus ROG STRIX rtx 4090 fits in one of the cases ????
Have a 4090 Strix in the 5000D with space to spare.
Love my 4000X case but i hate the Corsair RGB software. I might have gone with another company if i knew how bad it was
Really? People complain about software from every company if it helps
Just use SignalRGB. Works a treat with my NZXT H7 Flow RGB fans, Corsair H100x Elite, and GSkill Trident Z RGB RAM.
Is the back fan 140mm?
On the H7 Flow RGB, Yes.
@@TheProvokedPrawn looks like the holes for a 140mm with a 120 in its spot
Wait the h7 flow comes with 4 fans? I got ripped off I only got 2 with the case
No, this is the H7 Flow RGB. It's a different model.
the best is Lian Li Lancool 3
Corsair 5000D looks more premium with dust filters from all sides
I went back to black cases for my builds after 2 white cases and not going back lol
What was your reason? I'm debating between black and white and leaning towards black, but I've never had a white case before and am curious.
@CicaNails my reason is that most of my components are black so it will blend in better than black on white.
H7 flow provide E-atx, but 5000 does not provide it.
Except this is not mid-tower. Those used to be ATX (305mm) + PSU(85mm), that's about 390..420mm high case. Corsair is 520mm high. That's a large tower.
Corsair labels it a mid-tower, so you'll have to tell them they're wrong.
@@TheProvokedPrawn They want to sell you more, which in this case is bigger. Sizes have drifted slowly since 90's. I'm just calling bs when I see some. It's a large case.
It's not mini, not mid either.
@@vensroofcat6415bro just don’t buy it simple
@@JDoloo-ud6sw well they are pushing cases able to fit 10+ stupid "3 for 100$ during sale" fans and some of the most expensive AIOs too.
Corsair 3x the price of Arctic or Thermaltake. And you need huge cases to fit 3 of them. So they bloated up what's needed.
There is nothing wrong with a CPU having 65°C or even 80°. I hope since the current gen AMD release everyone has learned that finally? It's ok by design.
You don't reduce heat by adding more fans. You just redistribute it differently.
@@vensroofcat6415 I get what you saying equal airflow pressure
Looks like the nzxt could be more inspired design wise. That’s a bit too derivative imo.
H7.
The best of those two is the Lian Li Lancool 3.
ofc... i own that case and nothing comes close to its airflow perfomance
@@Bazo712 I doubt it.
but i prefer the look of the H7 or the 5000D over the Lancool 3
The rad on the NZXT case is a classic fail that GamersNexus talked about years ago. The pump is above the tubes on the rad. You should rotate the radiator to have the pump under the rad inlet to avoid air bubbles getting into the pump head.
No. You misunderstood the video. The pump can't be the highest point so bubbles don't get trapped in it. But it's not the highest point. The top of the rad is...
@@TheProvokedPrawn Always nice to see someone that understands that! So many "builders" parrot the old wives tale.