Kitchen IKEA Metod - built-in dishwasher- the solution to the problem of assembly

Welcome. If you have found this film, it means that you have decided on the IKEA kitchen and your own dishwasher, e.g. BOSCH discussed in the set. There are many solutions, you can use IKEA accessories:
1. ERSÄTTARE which requires the use of 2 front elements and causes its breaking. The solution is convenient because it ensures the correct height of the front, but forces the assembly of some elements to the fronts of adjacent cabinets. I do not know if it will work if we do not screw them to the side cabinets, because the whole mechanism is based on broken hinges. You can check it on the IKEA website in the Installation Instructions,
- BEHJÄLPLIG which, unlike the above model, allows the installation of the entire 80 cm front, but will work only if the dishwasher is built-in on the right and left with a plate. In theory, I could also do it by adding a disc between the fridge and the dishwasher (you will see it in the film) but the way of opening the door does not suit me. The front slides on special guides and although the system works great, after opening we have a huge front that protrudes about 10 farther than the dishwasher door itself.
In other videos and guides, users create their own systems, usually by CUTTING the front bottom or breaking it with hinges. But the cut doesn't look good because we're losing the front lines.
In my case, I put the dishwasher on the ground and mounted the front to it. At the bottom I had everything according to the instructions of the dishwasher, and at the top ... I made a drawer. I obtained an additional drawer front by cutting the 80 cm IKEA front. I made the drawer myself, attached it to the counter and leaned it on the dishwasher using an HDF board. The drawer is about 6 cm deep (full size is about 7.5 cm. Perfect for knives and boards and handy kitchen bullshit. The whole can still be screwed together but I have time for this because the kitchen still needs some corrections.
The most important advantage of this solution is the fact that everything works just like in a traditional kitchen, the space is used completely, and the front of the dishwasher is faced with the door of the dishwasher.
When installing an IKEA dishwasher, the problem will be solved by itself, because these are not so HIGH (their dimensions are not different from other dishwashers) but above all they have a proper recess at the bottom so that the front hides when opening the door. I showed it in a movie. If you have questions about the kitchen or my way to solve the problem, write in the comments.
1. ERSÄTTARE which requires the use of 2 front elements and causes its breaking. The solution is convenient because it ensures the correct height of the front, but forces the assembly of some elements to the fronts of adjacent cabinets. I do not know if it will work if we do not screw them to the side cabinets, because the whole mechanism is based on broken hinges. You can check it on the IKEA website in the Installation Instructions,
- BEHJÄLPLIG which, unlike the above model, allows the installation of the entire 80 cm front, but will work only if the dishwasher is built-in on the right and left with a plate. In theory, I could also do it by adding a disc between the fridge and the dishwasher (you will see it in the film) but the way of opening the door does not suit me. The front slides on special guides and although the system works great, after opening we have a huge front that protrudes about 10 farther than the dishwasher door itself.
In other videos and guides, users create their own systems, usually by CUTTING the front bottom or breaking it with hinges. But the cut doesn't look good because we're losing the front lines.
In my case, I put the dishwasher on the ground and mounted the front to it. At the bottom I had everything according to the instructions of the dishwasher, and at the top ... I made a drawer. I obtained an additional drawer front by cutting the 80 cm IKEA front. I made the drawer myself, attached it to the counter and leaned it on the dishwasher using an HDF board. The drawer is about 6 cm deep (full size is about 7.5 cm. Perfect for knives and boards and handy kitchen bullshit. The whole can still be screwed together but on