Thank you, without your video I probably would never know about this system. Saved me from a lot of problems. Update : I had 145 mm distance from the bottom for a Bosch dishwasher and that is not mentioned in the manual. I used the 135 mm holes and everything is fine.
@DIY Helper thank you for this post. I bought the Ikea system and i saw i had 145mm and i started to think what now should i put it higher or what and saw you comment. So you also had 145mm and did the A hole’s for 135mm and everything was great? I am planing today to do it and was realy woried…
Sensational video! Tip for those who like me have a taller than A point on the little metal measuring thing (ABC..), just make sure your dishwasher is as flush as possible with the countertop and use the highest possible option ("A" in this case), even if your measurement is higher. Worked for me with a Beko dishwasher that was +22mm higher.
Can also confirm that it works on a 148mm offset dishwasher (Ariston / Hotpoint LTF 11M132C). I had to grind the stop blocks on the aluminum railings so it wouldn't catch, but other than that, works great!
This is the info I was waiting for the whole video. I'm at 150mm and was wondering if I should even try and assemble it or just return the whole thing to IKEA. Thank you!
Awesome video, gives you so much more confidence than the printed instructions. I just installed this with a Bosch series 4 replacing the Ikea dishwasher that died in our Ikea kitchen. Extra tips would be to emphasize that you need to install the dishwasher 1-2cm deeper when using this as it is a extra layer between the panel and the dishwasher, and also clearer directions on the last step with the two white clips to prevent the door from popping out of the clips on the installed bar at the bottom. Total lifesaver video. Thanks so much!
You really helped me man... I spent a few days installing a new Ikea kitchen and than almost the same amount of the time installing this "PÄRAPLÖGICK" evil Martian mechanism... This video really helped me understand what's going on.
we are so grateful for this video! Where we live, we were not able to find any professional that would know how to install an integrated non-Ikea dishwasher into an Ikea kitchen and your video is a step-by-step guide. You saved us stress and some money - thank you!
The staff at my ikea didn't know it existed. Even though they had 140 in stock. Recommended an alternative of €110 from another reseller. During the kitchen planning nobody mentioned anything about this problem. They only put 'old dishwasher at consumers own risk' in the order confirmation. After I searched the Internet I found out about the sliding hinge. After seeing your video I found the behalpjig hinge at the ikea. Had to Google it because I couldn't find it on the ikea site. Thanks a lot for saving me €60 and making it easy to install.
I had this device installed by a third party company, they did an awful job. I realized today that they installed the large plastic piece out of track, they never read the instructions. I managed to disassembly it and do it correctly thanks to your video! thank you so much!
Fair play. The IKEA instructions on this one were not up to scratch in my opinion. So thanks for the help, don’t think I would have sorted it otherwise for my 450.
Thank you absolutely brilliant have bought same for my IKEA kitchen had two kitchen fitters who were unable to install my dishwasher. Thanks to this video I can do it myself 👍 God bless.
Thank you for this video!! We've just used it to install our new Bosch dishwasher. The Behjalplig is a slightly different shape now and it didn't line up with the dishwasher door screws, but we just drilled new holes into the Behjalplig panels and it's worked fine. As below, our dishwasher was also approx 145mm at the bottom but the 135mm holes have worked fine. Thanks again.
Your video has helped us so much today! Thank you for sharing your expertise in such a calm and professional way. It was super easy to follow your instructions and saved us Anglos deal of tears and time 😂
ikea support told me there was no other solution other than to cut the door down to 720mm to fit a hotpoint dishwasher. Only by luck I came across thr behjalplig hinge , great that a video exists and saves the hour you need to fathom out their awful instruction sheet, thank you
So finally plucked up the courage to fit the door slider, using your video it was quite an easy task ! The door woods were a slightly different shape but I guess a couple of years has passed since your video was shot apart from that it was exactly as you showed….quite chuffed, enjoy the coffee !
Thank you so much, great Video. I would emphasise to viewers to watch right to the end as it turned out to be very important for me.(those little wheels and what they'r for) Thanks again. I'd have been lost without you. Cheers
Thanks for explaining it In that easy understanding way.I will try to use it as to remove the existing panel with one of different Colour. Without your video I doubt I would manage.
An ancient proverb says "clamps are one of those things that a man can never have enough of". So time to buy (many) more. I enjoyed the video by the way: thanks.
One of the best videos I have ever seen! Watched and performed today - brilliant result. Thank you very much for your effort! Best regards from Germany!!
Thank you sir! I just had my kitchen installed without the dishwasher door. I used Samsung's instructions only to realise that the 80 cm Ikea door just wouldn't work. Now I know that I have a solution. Have a great one!
You are amazing with a very humble and helpful heart. Thank you so much for making all efforts and time to create this video. This will be very helpful. I am planning to install the same today.
Thanks for making this. Just off to get one, the only suitable alternative is about £110-130. I was scratching my head big time with the door fouling the base of the dishwasher. It’s silly that the Ikea kitchen planners aren’t advising on this. My guy was useless.
Hi, personal experience - they don't have it in stock, ie. you can't find it on-line but, to my surprise, they just put it on the inventory list when I was buying a "cabinet" for alternative dishwasher. Just told them I got mine (dishwasher) so they asked if I needed 'the kit', I said 'absolutely' and they just added this to to the order. Got this with all other items I ordered. Part number is 604.923.49 and current version has slightly different parts that go on the dishwasher (seems like cutting costs as they removed good chunks of unnecessary material). Got it all within last 2-3 weeks. Btw, it was IKEA in Poland.
@@macshyha Bought mine in Hungary a week ago. Surprisingly they did not remove the material, rather changed the shape. The black thingy attached to the dishwasher is in the L shape. The rest is identical.
Just installed it as per video and with assistance of manual in Romania. Still some space remaining when lateral supports flex in single screw. Any idea how to make it more rigid top side?
Thank you so, so much for this video!! We would have been lost without it (we were already lost with step 1 and 2 ikea instructions ;-)) Greetings from Germany!!
For future users of IKEA Behjalplig sliding hinge :) The way he installed those plastic sliders with rotating wheels is wrong (11:55). They should be installed opposite than he did. The height-adjusting wheel should be at the bottom of panel. With this way of mounting (as the original IKEA instruction says - it is with mistake) the front panel will be sliding down everytime because of weight and you won't be able to adjust it properly.
Love what you're doing here. Thank you for posting this. Would you please measure the distance that the sliding mech uses from the inside of the cabinet door to the front face of the dishwasher? I've only got a max of 9mm to move it back further. I could cope with a 1mm protrusion but much more than that and it will look wrong! I can't see the thickness it needs on the Ikea website either, so really hoping you can help! Cheers
Great tutorial, thank you for all the little tips and tricks! I found myself in the situation where the whole kitchen was already built up, everything else was mounted in place and the dishwasher front was stopping the dishwasher from opening all the way up, so I found this video which was really helpful for finding a solution for my problem, but the more recent problem is that Ikea doesn't build or supplies this sliding adapter set anymore, so if you're lucky enough like me you will still br able to find this adapter on eBay or Facebook marketplace, but just a heads up, you won't be able to buy it anymore in Ikea, at least not in Germany. It's quite sad because when planing and buying your Ikea kitchen there are no such warnings or "heads up" that the front won't match other dishwashers other than the ones solyby Ikea, it would have been of great help to have known this before I bought and installed my new kitchen. Once again thank you for your help and good luck with your future projects!
Thanks for this feedback, i have just checked and the product is still available in the UK, so not sure if some countries are finishing it, or just out of stock.
Thanks for this great and useful video! I am about to buy this for my new bosch dishwasher, but before I do that want to clarify something. At the end of the video you mentioned after fitting in the system and the door, the whole thing wasn't in line with the other cabinets but that we can push it back until it sits flushed with the rest of them. When you push it back did you also had to move the horizontal bar that you installed at the beginning? What steps would you recommend in order to avoid mistakes and installing it correctly from the beginning? Thanks!
From what I've seen, the jig which is used to drill the holes for the bar, sets the depth in the cabinet, and will make the cabinet door flush. I've looked at a few Ikea cabinet door thicknesses and they do range in size, which will influence how much the door is proud or under flush though. Not sure what thickness the jig is set too.
Hi and thank you for your video. I have a problem. I want to roll up the front, but it will roll back down slowly by itself, just like it’s too heavy. Is there a stop mechanism? Do I miss something?
Hi, thanks for this video its extremely helpful. May I please ask, as you mentioned at the end of the video the door can stick out because of the sliding hinge mechanism, however I have no more space behind the dishwasher to push it further back so is there any other way around the door sticking out? I want the door to be flush or in line with the other cabinets. Thank you :)
Thank you, without your video I probably would never know about this system. Saved me from a lot of problems. Update : I had 145 mm distance from the bottom for a Bosch dishwasher and that is not mentioned in the manual. I used the 135 mm holes and everything is fine.
I came here to find out exactly what you wrote about the distance being more than 135mm. Thank you, sir!
@@develko glad to hear I am not the only one 😅
@DIY Helper thank you for this post. I bought the Ikea system and i saw i had 145mm and i started to think what now should i put it higher or what and saw you comment.
So you also had 145mm and did the A hole’s for 135mm and everything was great? I am planing today to do it and was realy woried…
@@brankosimeunovic3481 yes you can use the 135. You can adjust the front after that with the 2 wheels that grip on the telescopic bar.
Thank you I was already worried 🙏
Sensational video!
Tip for those who like me have a taller than A point on the little metal measuring thing (ABC..), just make sure your dishwasher is as flush as possible with the countertop and use the highest possible option ("A" in this case), even if your measurement is higher.
Worked for me with a Beko dishwasher that was +22mm higher.
Thanks for the great feedback
Can confirm with a Bosch that has 140 mm !
Can also confirm that it works on a 148mm offset dishwasher (Ariston / Hotpoint LTF 11M132C). I had to grind the stop blocks on the aluminum railings so it wouldn't catch, but other than that, works great!
This is the info I was waiting for the whole video. I'm at 150mm and was wondering if I should even try and assemble it or just return the whole thing to IKEA. Thank you!
Awesome video, gives you so much more confidence than the printed instructions. I just installed this with a Bosch series 4 replacing the Ikea dishwasher that died in our Ikea kitchen. Extra tips would be to emphasize that you need to install the dishwasher 1-2cm deeper when using this as it is a extra layer between the panel and the dishwasher, and also clearer directions on the last step with the two white clips to prevent the door from popping out of the clips on the installed bar at the bottom. Total lifesaver video. Thanks so much!
I was a bit of a loss reading the instructions until I came across this video. Brilliant. Thank you.
You really helped me man... I spent a few days installing a new Ikea kitchen and than almost the same amount of the time installing this "PÄRAPLÖGICK" evil Martian mechanism... This video really helped me understand what's going on.
we are so grateful for this video! Where we live, we were not able to find any professional that would know how to install an integrated non-Ikea dishwasher into an Ikea kitchen and your video is a step-by-step guide. You saved us stress and some money - thank you!
No problem. Glad this was useful for you
The staff at my ikea didn't know it existed. Even though they had 140 in stock.
Recommended an alternative of €110 from another reseller.
During the kitchen planning nobody mentioned anything about this problem. They only put 'old dishwasher at consumers own risk' in the order confirmation.
After I searched the Internet I found out about the sliding hinge.
After seeing your video I found the behalpjig hinge at the ikea.
Had to Google it because I couldn't find it on the ikea site.
Thanks a lot for saving me €60 and making it easy to install.
thanks for this. The instructions were a little tricky without your guide. much appreciated
I had this device installed by a third party company, they did an awful job. I realized today that they installed the large plastic piece out of track, they never read the instructions. I managed to disassembly it and do it correctly thanks to your video! thank you so much!
Thats great that you have done it, well done. Thanks for the feedback
Fair play. The IKEA instructions on this one were not up to scratch in my opinion. So thanks for the help, don’t think I would have sorted it otherwise for my 450.
Great to hear it was helpful for you, thanks for the feedback
Thank you absolutely brilliant have bought same for my IKEA kitchen had two kitchen fitters who were unable to install my dishwasher. Thanks to this video I can do it myself 👍 God bless.
Glad it helped
Wspaniały film oddający bardzo dobrze instrukcję zamontowania tych prowadnic. Dziękuję bardzo za pokazanie szczegółowo montażu. Pozdrawiam!:)
Nie ma problemu, cieszę się, że było to dla Ciebie pomocne
Super vidéo! Même chez ikea, ils ne m'avaient pas conseillé ce mécanisme. Mille merci👍🏼
Awesome video, gives you so much more confidence than the printed instructions.Thank you for posting this.
Thanks a ton for this video, you saved me from panic from looking at Ikea guide. All went well with following you. Greetings from PL.
3 years later this video still rescued me from a 12 round fight with Behjalplig! Thank you
No problem glad it was helpful for you. Thanks for the feedback 👍
Excellent video - I have hit this problem today with a Bosch dishwasher.
Brilliant video! We couldn’t quite fathom the instructions and were struggling! A finished kitchen is now in sight, thank you!
Great to know it helped. Thanks for the feedback
Thanks so much. This is a brilliant instruction video and I don't think I could have managed without it.
You're welcome!
Thanks for this useful and well explained video. I am about to install the Behjälplig today and this will help a lot.
Thank you very much! Perfectly explained. Great job!
Thank you very much, now I know that this will suit my dishwasher! Very helpful to see such a detailed video, it saved me a lot of time!
Glad it was a help, thanks for the great feedback
Thank you very much ! I didnt' think I could be able to do it by myself but I finally made it thanks to your super clear video !
Glad it helped, thanks for your feedback.
My kitchen is from IKEA and my Dishwasher is Bosch. This video has made me aware of this product and showed me how to fit it in. Thanks very much
Glad it was helpful!
Thank you for this video!! We've just used it to install our new Bosch dishwasher. The Behjalplig is a slightly different shape now and it didn't line up with the dishwasher door screws, but we just drilled new holes into the Behjalplig panels and it's worked fine. As below, our dishwasher was also approx 145mm at the bottom but the 135mm holes have worked fine. Thanks again.
Great to know this was helpful for you. Thanks for the great feedback 👍
Your video has helped us so much today! Thank you for sharing your expertise in such a calm and professional way. It was super easy to follow your instructions and saved us Anglos deal of tears and time 😂
No problem glad it was useful for you 😊
Excellent video and thank you. Was a pleasure to fit this product and I would have struggled without your concise and accurate instruction.
No problem, glad it was helpful for you. Thanks for the feedback
Thanks this video was really helpful and I'm now feeling relatively confident to fit a new hinge to my dishwasher. Thanks.
ikea support told me there was no other solution other than to cut the door down to 720mm to fit a hotpoint dishwasher. Only by luck I came across thr behjalplig hinge , great that a video exists and saves the hour you need to fathom out their awful instruction sheet, thank you
No problem. Glad this was helpful for you
What a brilliant video, thank you for taking the time to make it.
Thank you very much!! Without your movie I would not put it together!!!
This was very helpfull and very clear. I haven't even look at the manual, I just watched what you did and copy-pasted it.
Glad it was helpful thanks for the great feedback
Awesome video - absolutely terrified at doing this but you made it all very easy. Thanks mate
So finally plucked up the courage to fit the door slider, using your video it was quite an easy task ! The door woods were a slightly different shape but I guess a couple of years has passed since your video was shot apart from that it was exactly as you showed….quite chuffed, enjoy the coffee !
Great to hear the video helped, thanks for the feedback.
Thanks a million. I managed to do it on my own rather than paying someone else ton of money to do it.
That's great to hear, well done.
Decent vid. Really helped me visualise it before I install.
By the way, I would call "the plastic part" a shuttle or trolley.
Thank you so much, great Video. I would emphasise to viewers to watch right to the end as it turned out to be very important for me.(those little wheels and what they'r for) Thanks again. I'd have been lost without you. Cheers
Thank you for this video! I was desperate because I didn’t understand the ikea instructions and your video was really helpful!
Glad it was useful for you. Thanks for the feedback
Thanks a lot!! Great and clear explanation!
An excellent video, made the installation so much easier! Thank you so much.
Thanks for explaining it In that easy understanding way.I will try to use it as to remove the existing panel with one of different Colour. Without your video I doubt I would manage.
Thank you for this video, very usefull. I am about to install my Behjälplig. This way more usefull then the manual.
Best installation video I've seen saved a lot of brain ache. I'm trying it on 45cm machine into a 60cm space, fingers crossed.
Good luck!! Thanks for the feedback
Thank you so much from France!
Thanks a lot for this amazing explanatory clip! :) We successfully managed to attach the IKEA front to our Bosch dishwasher.
That's great to hear this video was useful for you
Thanks for the feedback 😀
Brilliant instructions, thank you!
An ancient proverb says "clamps are one of those things that a man can never have enough of". So time to buy (many) more. I enjoyed the video by the way: thanks.
Love the Ancient proverb. Off to the clamp shop I go. Thanks for the feedback
One of the best videos I have ever seen! Watched and performed today - brilliant result. Thank you very much for your effort! Best regards from Germany!!
Glad it was helpful for you, thanks for the feedback
Great. Thank you for the instructions. Greetings from Germany
Well done that man!
your video helped me a lot Greetings from Poland 🇵🇱🇵🇱👍🏻 there were some modifications
That's the internet advice I was looking for! Thank you! 😊
No problem, glad it was useful for you
Great help, thank you!
Thank you very much for your assistance. You been very helpful 🙂
Bravo. Very clear and useful. Good job. My wife said she would marry such a man like you. I have still a lot to learn then... greetings
Thank you so much ! Your video is really helpful. It's awsome !!!! 👍😁
Thank you sir! I just had my kitchen installed without the dishwasher door. I used Samsung's instructions only to realise that the 80 cm Ikea door just wouldn't work. Now I know that I have a solution. Have a great one!
That's great to hear it was helpful for you. Good luck on getting the door installed. 👍
@@lords-electrical Aaaaand it's done! Thank you again! 🙏💃
You are amazing with a very humble and helpful heart. Thank you so much for making all efforts and time to create this video. This will be very helpful. I am planning to install the same today.
Thanks for the feedback, good luck with your installation
Great instructions, thank you
Great video, just what I was after 👌
That's a helpful video. Thanks for the effort!
Thanks for making this. Just off to get one, the only suitable alternative is about £110-130. I was scratching my head big time with the door fouling the base of the dishwasher. It’s silly that the Ikea kitchen planners aren’t advising on this. My guy was useless.
Awesome video, definitely should do more like it!
That's the plan!
Thank you for posting this. Most helpfull
Handy video, looking forward to installing it in 2022 when when its eventually in stock.
Hi, personal experience - they don't have it in stock, ie. you can't find it on-line but, to my surprise, they just put it on the inventory list when I was buying a "cabinet" for alternative dishwasher. Just told them I got mine (dishwasher) so they asked if I needed 'the kit', I said 'absolutely' and they just added this to to the order. Got this with all other items I ordered. Part number is 604.923.49 and current version has slightly different parts that go on the dishwasher (seems like cutting costs as they removed good chunks of unnecessary material). Got it all within last 2-3 weeks. Btw, it was IKEA in Poland.
I just bought it yesterday. Oslo Norway. Orderen in the kitchen department.
@@macshyha Bought mine in Hungary a week ago. Surprisingly they did not remove the material, rather changed the shape. The black thingy attached to the dishwasher is in the L shape. The rest is identical.
@@annamazurkevich1236 Yup, exactly. Looks like it's thinner towards the bottom (comparing to the version in the video).
Just installed it as per video and with assistance of manual in Romania. Still some space remaining when lateral supports flex in single screw. Any idea how to make it more rigid top side?
Yess sir!! Thank you very much from the Netherlands😁👍🏻. This has make installation very easy peasy. Great video!
You are welcome!
Honest explaination , cheers
Very helpful and comprehensive!!
Glad it was helpful!
Thank you, this helped me find the product I need to buy in order to finish my kitchen.
No problem, glad it was helpful for you
great one....you save me :) thanks from France
Thank you so, so much for this video!! We would have been lost without it (we were already lost with step 1 and 2 ikea instructions ;-)) Greetings from Germany!!
That's great to hear that it was useful for you. Thanks for the feedback
Thank you for the video, now i can assemble it correctly! The ikea manual wasn't very clear about sliding the two plastic things on the rail.
For future users of IKEA Behjalplig sliding hinge :)
The way he installed those plastic sliders with rotating wheels is wrong (11:55). They should be installed opposite than he did. The height-adjusting wheel should be at the bottom of panel. With this way of mounting (as the original IKEA instruction says - it is with mistake) the front panel will be sliding down everytime because of weight and you won't be able to adjust it properly.
Thank you very much. Regards form Spain!!!
Thank you so this video helps me so it's like magic.
Brilliant!!! Thank you very much!!!
Thank you for great work... Amazing 😊 I have needed that support...
LG from Germany
very well explained thank you 👍
Very informative. Brilliant
Thank you so much for this video, you saved me !
Really enjoyed this video. Look forward to seeing some more soon.
This is great thank you!
Great video!! Total lifesaver :) Cheers!
Excellent video....many thanks.
Thank you this video is so helpful!
No problem, glad it was helpful for you
Thanks so much - this really helped us! Amazing video
No problem glad it was helpful for you
Love what you're doing here. Thank you for posting this. Would you please measure the distance that the sliding mech uses from the inside of the cabinet door to the front face of the dishwasher? I've only got a max of 9mm to move it back further. I could cope with a 1mm protrusion but much more than that and it will look wrong! I can't see the thickness it needs on the Ikea website either, so really hoping you can help! Cheers
Thank mate cracking video for info cheers
😊
Great tutorial, thank you for all the little tips and tricks! I found myself in the situation where the whole kitchen was already built up, everything else was mounted in place and the dishwasher front was stopping the dishwasher from opening all the way up, so I found this video which was really helpful for finding a solution for my problem, but the more recent problem is that Ikea doesn't build or supplies this sliding adapter set anymore, so if you're lucky enough like me you will still br able to find this adapter on eBay or Facebook marketplace, but just a heads up, you won't be able to buy it anymore in Ikea, at least not in Germany. It's quite sad because when planing and buying your Ikea kitchen there are no such warnings or "heads up" that the front won't match other dishwashers other than the ones solyby Ikea, it would have been of great help to have known this before I bought and installed my new kitchen. Once again thank you for your help and good luck with your future projects!
Thanks for this feedback, i have just checked and the product is still available in the UK, so not sure if some countries are finishing it, or just out of stock.
@@lords-electrical great tutorial video, one question, why did you place the parts 19mm in from edges. Ikea show them flush with appliance door.
very usefull! thank you for this video.
Thanks for this great and useful video! I am about to buy this for my new bosch dishwasher, but before I do that want to clarify something. At the end of the video you mentioned after fitting in the system and the door, the whole thing wasn't in line with the other cabinets but that we can push it back until it sits flushed with the rest of them. When you push it back did you also had to move the horizontal bar that you installed at the beginning? What steps would you recommend in order to avoid mistakes and installing it correctly from the beginning? Thanks!
thanks, really useful and well made video
From what I've seen, the jig which is used to drill the holes for the bar, sets the depth in the cabinet, and will make the cabinet door flush. I've looked at a few Ikea cabinet door thicknesses and they do range in size, which will influence how much the door is proud or under flush though. Not sure what thickness the jig is set too.
Well done mate!
Man - thanks a lot for this ! Legend
Hi and thank you for your video. I have a problem. I want to roll up the front, but it will roll back down slowly by itself, just like it’s too heavy. Is there a stop mechanism? Do I miss something?
Just in time. Tkx for this.
Hi, thanks for this video its extremely helpful. May I please ask, as you mentioned at the end of the video the door can stick out because of the sliding hinge mechanism, however I have no more space behind the dishwasher to push it further back so is there any other way around the door sticking out? I want the door to be flush or in line with the other cabinets. Thank you :)
Nice instruction
Very Helpfull, thank's !
You're welcome!
Never stop making videos. Good stuff!
Thanks, will do!