Lol like when your videos are like this long or longer. Always loved your content. But I understand you are a very busy gentleman so you have to do more shorts.
Still waiting for the day you get your hands on an 11-14 charger Taillight 🔥🙌 /e What halo kit is best for the charger? Reflector housings. I'll check sinister out.
Whats up FLY! Thanks for your content man I love watching your videos. I'm about to do my headlights on my 2017 infiniti qx80 and ima swapp the projector lens out for one etched and get rid of some of the fake chrome. I'm thinking about adding some Led Strips. Whats the best ones I should use and how do I get them to work with the blinkers. Do I just wire them straight to the blinker harness? If you would let me know please. Thanks once again
I have a 4g eclipse and I was looking to customize my headlights because there’s no good aftermarket ones. I didn’t even search this car specifically and i was gifted your video. thank you!
these videos have been super informative. i have a 2015 accord coupe and can't find ANY aftermarket tail lights / headlights. and your videos have helped me realize if i follow your steps then i could possibly do it myself 👍🏻
After watching this video and also this video of yours, "4 Types of Sequential LED Switchback Lights | FlyRyde", my question is when I take apart my 2014 Mercedes Sprinter headlights is there ever a place in the build where the clear plastic cover that was original glued on can be re-attached successfully using a rubber gasket making a tight seal if there are enough screws for the cover. You know, instead of going back in the oven.
When removing strip at end of video you can try taking a exacto knife and score the sides its what paintes do to remove tape from a wall if done right your paint job should be safe from chipping im guessing same thing would work for that strip
So I aslo have a 4g Eclipse with rgb halos. I did a crap job installing them and need to replace the lense cover and housinga. Can I put the internals of my stock hid lights inside the depo light housings?
Wowww just found your channel and am getting myself into blacking out my headlights housing, all to find this video a little later! I have a 4G Eclipse with the factory HIDs. I tried using aftermarket halo headlights that were made for halogen models only then to find I didn’t even know I had HID! It’s been a mess. I love seeing others with eclipses! I’ve never customized headlights before though! 😭
Not if it sat and gassed out really well, especially in the heat. Lots of times people seal up painted parts that are only dry on the surface, and then the sun bakes them dry inside the lights. The out gassing during that is what wrecks your lenses
They where more common on what I like to call the "4g V2" or the ones made from 2010-2012, and most common on the gs sport, the where gorgeous but unfortunately much like the interior they didn't age well and most of them ended up with broken hid mechanisms and got swapped for halogens due to the new hid assemblies costing upwards of 400$ a piece
Or longer. Remember that just because the top layer of paint feels dry to the touch, doesn’t mean it’s not still drying deeper down. Those fumes have to go somewhere. Probably best not to have that somewhere be the inside of your headlights.
So like how much would it cost me to have you do headlights for my 2007 cheysler 300 srt8? It's got the h.i.d system from factory too. I want halos. Demon eyes and halos.
Hey does anyone know if “Depo” manufacturer’s quality of fitment is good as I don’t want to lose my nice straight body lines just because i went cheap avoiding a new OEM light?
I been wanting to do this to my car with my eclipse and I'm going to use your video as my guide and also do the brake lights after I order new lights cause mine have cracked from the sun
Bro your not gonna Depin a connector if you mess up that one pin you gotta find a way to get a whole new plug because you will not be able to buy their pins, just cut the wire run it through and solder it then however you prefer to protect the wire
even when its done right custom headlights and tails have a high failure rate. maybe one day components will last much longer than they do now. for what many of these LED's cost its a big waste of money longterm. technology needs to hurry up lol
I’d tell the prettiest girl in the world to send her BMW lights to a guy who specializes in BMW lights (not me) 😬 I appreciate you my man, just not interested in doing BMWs, which will only attract more BMWs. I see you though Tom, I’m just trying to educate you so you can DIY 🙏
God wtf. RUclipsrs have become a bunch of losers...cant show the actual install...gotta watch on his tiktok...yea ...NO. MOVING ON 1000000X other videos
May the 4th be with you!
Lol like when your videos are like this long or longer. Always loved your content. But I understand you are a very busy gentleman so you have to do more shorts.
@@3103Juan I’m back to multiple long videos a week. Shorts may end up just getting moved to a separate clips channel.
Still waiting for the day you get your hands on an 11-14 charger Taillight 🔥🙌
/e What halo kit is best for the charger? Reflector housings. I'll check sinister out.
Whats up FLY! Thanks for your content man I love watching your videos. I'm about to do my headlights on my 2017 infiniti qx80 and ima swapp the projector lens out for one etched and get rid of some of the fake chrome. I'm thinking about adding some Led Strips. Whats the best ones I should use and how do I get them to work with the blinkers. Do I just wire them straight to the blinker harness?
If you would let me know please. Thanks once again
We're are you located bud
I have a 4g eclipse and I was looking to customize my headlights because there’s no good aftermarket ones. I didn’t even search this car specifically and i was gifted your video. thank you!
these videos have been super informative. i have a 2015 accord coupe and can't find ANY aftermarket tail lights / headlights. and your videos have helped me realize if i follow your steps then i could possibly do it myself 👍🏻
Man I really like how you go into detail! I wished that you did regular vehicles, like mustangs...
I think Eclipse is pretty normal, but I’ll definitely do a mustang soon 👍
@@flyryde thank you so much! I'm buying my Dad's 2000 Mustang, and would love to upgrade the lights!!!
It is common valeo projector in vast Eu cars from ca 2010 till full led era. It came in 2 options standaed bixenon or abl
What kinda lights do you use in motorcycle headlights
After watching this video and also this video of yours, "4 Types of Sequential LED Switchback Lights | FlyRyde", my question is when I take apart my 2014 Mercedes Sprinter headlights is there ever a place in the build where the clear plastic cover that was original glued on can be re-attached successfully using a rubber gasket making a tight seal if there are enough screws for the cover. You know, instead of going back in the oven.
Hi, nice vid. What do you use to dechrome?
Do you do a baking soda bath after to neutralize the degreaser?
My 06 eclipse gs did not have the projectors. First mod was some out of the box halo units
Hey man whatre you dipping the plastic in to dechrome it?
maybe you read this and can help since this is what you do customize. I have 2006 honda pilot do you think or know what size halo I'd need ?
which addressable LED strips did you use? ws 2815?
When removing strip at end of video you can try taking a exacto knife and score the sides its what paintes do to remove tape from a wall if done right your paint job should be safe from chipping im guessing same thing would work for that strip
What manufacturer are those led i put in amazon lights and mine are nowhere near as bright
What do u use for diffusing the led
I mean to say the ring cover that white little thing what material is that is that pigmented resin ??
Ever done xc90 volvo headlights?
Where is your place and if i want to make hyundai elentra 2010 how much it will cost ?
If i were to sandblast some headlight bezels. What blast media should i use?
0:44
Pls tell me what creature is this?
Looks pretty much like a water nymph.
Could you post a link to the parts you used?
So I aslo have a 4g Eclipse with rgb halos. I did a crap job installing them and need to replace the lense cover and housinga. Can I put the internals of my stock hid lights inside the depo light housings?
Wowww just found your channel and am getting myself into blacking out my headlights housing, all to find this video a little later! I have a 4G Eclipse with the factory HIDs. I tried using aftermarket halo headlights that were made for halogen models only then to find I didn’t even know I had HID! It’s been a mess. I love seeing others with eclipses! I’ve never customized headlights before though! 😭
with the degreaser the piece is black? Or do you paint it?
I used regular (not high temp) matte black plastic paint for my headlights.. did I mess up and risk paint flaking? 🥲
Not if it sat and gassed out really well, especially in the heat. Lots of times people seal up painted parts that are only dry on the surface, and then the sun bakes them dry inside the lights. The out gassing during that is what wrecks your lenses
I would love to do some 5x7 head lights myself
Hey whats up Chris! What is that Zepp degreaser called? Or is it just that? Thanks man!
Same question
Did you find out, they are called Zep and do a whole range I still don't know exactly what he was using did you find out?
Zep Industrial purple cleaner and degreaser!
They where more common on what I like to call the "4g V2" or the ones made from 2010-2012, and most common on the gs sport, the where gorgeous but unfortunately much like the interior they didn't age well and most of them ended up with broken hid mechanisms and got swapped for halogens due to the new hid assemblies costing upwards of 400$ a piece
so what your saying is that i have to let my freshly painted headlights sit out in my garage for about 24hrs before reassembly???
Or longer. Remember that just because the top layer of paint feels dry to the touch, doesn’t mean it’s not still drying deeper down. Those fumes have to go somewhere. Probably best not to have that somewhere be the inside of your headlights.
@@flyryde alright thx for the info
Ever done 99-02 new beetle headlights?
Where can i find those lights?
Does anyone know what brand/model these headlights are or where I can buy them?
How much for a pair of nissan versa 2015 sv
So like how much would it cost me to have you do headlights for my 2007 cheysler 300 srt8? It's got the h.i.d system from factory too. I want halos. Demon eyes and halos.
Hey does anyone know if “Depo” manufacturer’s quality of fitment is good as I don’t want to lose my nice straight body lines just because i went cheap avoiding a new OEM light?
Can you do mine? 2012 fx35. How much?
I been wanting to do this to my car with my eclipse and I'm going to use your video as my guide and also do the brake lights after I order new lights cause mine have cracked from the sun
Are those illegal?
WHAT DO U USE TO KEEP THE LIGHTS IN PLACE?? WHAT KIND OF GLUE?
Jb weld or a clear plastic 2 part epoxy. Also you can use some heavy duty double sided mounting tape.
Where did you get those halos? I checked sinister retroworkz website and they only have white/yellow switchback halos.
I asked him, and he’ll hopefully add the newer brighter version he just sent me soon.
@@flyryde did you purchase the LED strip from him as well?
Done any headlights for the 1st gen Mazda 3 sedan yet?
Lol yeah man that’s my car.
@@flyryde Let's see it brother!
Love her vibes, she's so cool!
Good stuff!!! I really like the finished results!!
Glad you like it!
That's all well and fine, but can you just land already so i can get my plate?
Thanks bro this helps a lot 🤙
Good! What about it do you feel was the most helpful to you?
2005 ford f150 with fog lights, but not the round ones.
The struggle is always real when looking for someone to do a job right.
2012 eclipse get projectors
Good luck 🍀
Bro your not gonna Depin a connector if you mess up that one pin you gotta find a way to get a whole new plug because you will not be able to buy their pins, just cut the wire run it through and solder it then however you prefer to protect the wire
Awesome video
Anytime you need the addressable tubes but with nice diffusion and not dots Message me brother I got you 👍🏻
👍
*Zep industrial purple cleaner and degreaser ;-)
Headlights cargo vans Ford. Or ram
Second
You slow bro, even though you scheduled the video, lmao.
even when its done right custom headlights and tails have a high failure rate. maybe one day components will last much longer than they do now. for what many of these LED's cost its a big waste of money longterm. technology needs to hurry up lol
Bro you can fix them up no matter how bad they get don’t act like that😂 literally just sand them down good and recoat
Wish I was a pretty girl,been tryin to hire u for my e36(ig:@328ibmwe36) for over a year...
I’d tell the prettiest girl in the world to send her BMW lights to a guy who specializes in BMW lights (not me) 😬
I appreciate you my man, just not interested in doing BMWs, which will only attract more BMWs. I see you though Tom, I’m just trying to educate you so you can DIY 🙏
Third
First
God wtf. RUclipsrs have become a bunch of losers...cant show the actual install...gotta watch on his tiktok...yea ...NO. MOVING ON 1000000X other videos
4:19 they stupid hard to get from factory. The only way to get them now is by the little aftermarket support we got now 🥲