The lines in the lens actually help to aim the light output more precisely, so it doesn't blind oncoming traffic. Do you go out and test your creations to ensure you aren't actually causing issues and being a general dick to others on the road? I hope so, when I mod stuff, I do it with an aim to not "be that guy" that is creating issues where none needed to exist. I love your mods, but take a min to ensure that the mods you're doing don't cause issues for others. When you think only about how cool it looks for you and to hell with everyone else, you create momentum for overreaching and needlessly asinine laws to get passed.
I’d like to first give a legitimate acknowledgment that what you both posted was understandable and seemingly for the good of others. Here’s where I get real, and I promise, I’ll make a video on this, not only to correct anyone that’s confused, but because I genuinely DO care about you guys learning something. So about getting real, the aspect of this video referring to “blinding” people, is in reference to someone standing directly in front of your car looking at about a 45 degree angle down at the headlights with the low beams turned OFF, demon eyes on, with enough “blinding” light to catch your general attention, more like a “woah, what was that?” The part of the video where I talk about Fresnel lenses versus crystal clear, I challenge you to first research, then get first hand experience, then come back with any valuable knowledge to correct anything in this educational video. A clear lens projector will be found on certain projectors, such as the JDM or Euro spec 2015+ GTR lights compared to the factory North American spec lights of the same year. The difference in the two compared side by side will show exactly one difference: Clarity. You can see the output more clearly, where it is designed to go. Not up in someone’s eyes. Not up on stop signs and back windows of cars like all the DBag truck drivers with reflector housings and HID/LED “upgrade” bulbs... Clarity on the road, and specifically the cut off line. The absence of the lines/dimples/frosted pattern on the projector lens, allows for a sharper line, with a bluer “prism” or “flicker”. You’ll notice this as well from many current LED equipped factory headlights, or Luxury cars with HID from years past. They have sharper cut off lines. That is what the clear lens gives you. All the keyboard warrior talk, or tisk tisk BS uninformed concern that will continue to be added to this video is both expected (sadly) and yet understandable. Lastly, if you saw this on the road, you wouldn’t hate me. You wouldn’t run me over. You wouldn’t say anything to me. You wouldn’t correct me, or frown. You’d walk past the car, notice some glowing lights with a weird pattern, and either like it or not care. If you were to visit my shop and see this kind of custom work in person, you’d say the things inside were cool and you were glad to have stopped by and met me.. and that I was bigger in real life than you expected. That is all.
@@flyryde I was referring to being blinded by the lights but I was really just kidding around. I think it looks great and I am also jealous of the people who have nice cars with cool ass lights on them, as anal rampage stated because I actually think they look dope. good work brotha.
I've come to determine the quality of a video by three points. 1. Was the content put together well? 2. Was I entertained/educated by what I saw? 3. Was I left me wanting more? Your work/content is great, keep up the good work.
I actually appreciate all the tips and tricks you put in here. Who knew watching a 25 minute RUclips video would make me a demon light enthusiast. I always wondered what was in the projector that caused the cutoff look. I thought it was the lens but in reality it's the window in the back. Which I'm guessing is like a shutter.
This channel is outstanding.. I did some DIY purple underglow on my FZ6 and I'm addicted to modding now. I've subscribed, I'm going to get good at this and do the work on my friends machines for their birthdays. You're an authentic badass my man!
@@flyryde for sure man! I'm looking you up on IG. Lol you'll have to bear with me it's a long story I'll tell you as best I can and send you some news articles. I also have a kinda half-assed video on my channel about it.
I just used a piece of honey comb vinyl on the back of my projector lenses. Its much more cost effective and can be taken off if you decide you wanna go a different route with your etched lenses. This was my first ever headlight retrofit on my Q50 and turned out perfectly. cost me $450 all together in parts and the install wasnt that difficult. Just time consuming. The parts i used for my build were the Lightingtrendz flow series rgb kit and custom dynamics demon eyes.
@@flyryde shoooott I'm learning a ton from you man! I'll send you a pic of the set I just finished with that same demon eye setup of the internals. Modded shield and tuned as well! Turn signal lens retrofit with my "ghost etching" mod hehe
Chris great stuff man. Just one quick comment about the Fresnel lens. The lines in the lens are there to bend the light straight so it doesn't flood in all directions. The lines do nothing to soften the light. Essentially with a Fresnel lens you can direct the light without blinding oncoming drivers. A full clear light is a flood lens and lets light go in all directions looking brighter but in fact it's the same intensity as the Fresnel. Might be safer for cars driving towards you to have the Fresnel with honeycomb etched in it. Anyway love the channel and content! Keep up the great work man!
Nice work:) I work for a medical company and I build prototype vein finder machines. We also use highpower leds and for edging where wires make 90 degree turns an epoxy it's used. Not a fan of double sided tape for an area that is exposed to high heat.
The great thing about tape, is it works so well, and still, it’s not permanent. Glues and more hardcore adhesives basically are a commitment to always keep it the same, even if the product fails down the road. Not fun to pull parts out that are epoxied in, but it’s definitely something that happens.
I think that 3M double sided will generally hold up, but the electrical tape that its adhering to generally wont. You know what they say about the weakest link in a chain, if that electrical tape comes off, which it probably will in that scenario, the double sided goes with it no matter the strength of the double sided. I don't think most think about that.
I have a question and I need your advice please, I have 2011 Chevrolet Cruze and planning to install LED projectors but I do not know if that will create any electric issues or any errors. Kindly advice me on this. Thanks.
I have 2 questions. I would like to get a lens like that with 300 etched on it. Could you tell me where to contact the company you used to do your honeycomb pattern. The 2nd question can and is it ok to change the light to and led light?
For those wanting to ditch the terrible stock projectors - you can use the morimoto d2s 5.0’s with custom mounting brackets making it plug n play. You can also get the deamon eye mounting brackets as well. Lightwerkz has them!
So this is just to light up the lense? I have Halos so they would be around the lens I can still have the demon eyes? I'm asking because our state has a law against colored headlights
what up chris! you did work on my buddys gtr a couple years ago. your video popped up in my feed so it looks like your doing well!! keep up the good work bro
@@flyryde Paul. You modified his factory headlights and then he bought new headlights that you also worked on. It was fun hanging out while you worked haha
@@flyryde hahaha yes!!! that sounds like something i'd say. and super good to hear from you too, you have so many subscribers all that hard work is paying off. subbed!
From your experience , can you tell me which demoneyes is brighter between the Colormorph RGBW or the Profile prism RGB? I think the Profile Prism come with a reflector to help direct the light toward the front lens to make it more brighter, but is made to be installed on the top of the projector. I would like to mount a Profile Prism on the bottom of a Morimoto 4.0 projector, but am afraid the 9 leds on the board would be visible through the projector lens. One of the problems I see with demoneyes is the ability to be bright enough to see during the day.
Look at the Genesis Coupe Headlight in the beginning. The demon eye has one of each. We did an Aston Martin last year with 2 demon eyes in each Projector. It was cool , but kinda seemed like a lot of extra effort for not much different of a look.
I know this is probably not common for u and it probably a bit to ordinary, but do u have any idea how to make vw polo 6n headlights cooler without changing them out for aftermarket ones. Thank you in advance
I have a blue and a red led demond eye that I bought a long time, ( one color each does not change color like your ) don't remember from where. I have not use them yet. Would it be possible to intall both in the in each proyector? Have you done this? How would it look? Thoughts!!
Frederik Grosskopf what happens to hot glue when it gets hot 😉 Never use hot glue on anything headlight or tail light related. I used to early on, and I remember seeing lights I built a year later with all sorts of hot glue runs on the bezel, lol, such a fail. If not tape, I typically recommend using metal wire to tie parts down since it won’t fail over time.
Hey buddy you mentioned the focus st/rs lights have you ever opened up those headlights. I’m getting ready to tackle this, and I was wondering if you had any specific tips on that headlight
Aweosome video! I was around to watch the interior of the projector since my xenon lights don't light as I think they should anymore... So, I'm thinking the reflectors inside are toasted.. I'm thinking on opening my headlights and see if that part is replaceable or to chrome it back or even wrap it with aluminium/chrome reflective tape before replacing the whole thing... This will help me planning my move.. Thank you!
Have a question. Can I upgrade the projector to an led projector? I have an 08 g35 which probably has the same bi-xenon projector. I don't just wanna change the bulb as the light output won't be up to par and I don't wanna upgrade to another xenon as the warmup takes time.
Nice video, I had a question. I'm in the middle of swapping out my OEM projector lenses with high performance etched ones and I cant figure out how to get the factory lense out. If you could help me out that would be great. Thank you.
Drill a hole just big enough for the protruding led to fit. Mount the circuit board on the outside with some good adhesive sealant to seal the bulb. It’ll be lower and accessible. Not trolling just think it would be easier and neater.
Can I connect rgb wires to two separate demon eyes and stick one at the bottom and one on the top? Wouldn’t that add visuals on the ground and the eyes?
I gotta question man, I have a 2016 Silverado and just got the demon eyes, but I’m on 35 inch tires and an 8 inch lift so the headlights are just about eye level, would you recommend the bottom mount still? Or would it even make a difference with the truck being so high?
Why would you not use an epoxy to secure your circuit board rather than double stick tape? My worries would be the heat effect on the tape and long term life of your installation. There are some epoxies by Devcon that are heat rated also.
You’re missing one monster piece of the puzzle my friend, one that only comes from experience. You’re assuming that the part you want to ultra secure in place is not going to have any issues ever, and that much like a diamond being set into a piece of jewelry, this little LED board is perfect and will never experience failure or need to be replaced. Tape works great, it doesn’t all the sudden get tugged on by headlight gremlins inside the light, it’s secure yet replaceable, and it’s not messy. Practicality and efficiency my dude. Beats out overthinking and overbuilding all day every day 👌
Love your vids. I’m wanting to do this to my 370. I didn’t see any links accompanying the video. Where can I get the demon eyes leds and clear projector lenses? Thanks in advance.
Awesome instruction video. Would you be able retrofit projectors in a set 08 euro lights? There is aftermarket projectors ones but they are one piece instead of 2 piece and turns built in instead separate like stock.
Dude id love to do this to my Z but im terrified to open up the factory headlight assembly. Its funny cause I do everything else on my car myself but im just scared it'll mess them up. I havent seen much about your business yet but could i mail my headlights to you to get done?
Are you aware of any retrofittable LED projectors that dont have LEDs built in, so you could use a PnP LED like the diode dynamics SL1 i already own? Aftermarket projector housings im looking at are meant for halogen, and im told the projectors in them are trash. Is it just the projector glass thats junk? If it helps, truck is 2006 gmc sierra, and am told h1 mini 7.0 is the hid equivalent. Thanks in advance
@@flyryde dont know is that sad or not. Not saying that your poor but it's sad you have a such passion against cars but don't have your own custom car. But at least your wise and put that money to better use👌
Interesting vid. But if steel touches those open solder joints it wouldn't blow the led like you stated though. It would blow a fuse. The Led would be fine. Why not minus all the weird sticky tape and bubblegum and just use a good epoxy to mount the led.
I just installed a projector into my stock g35 coupe headlights and originally the socket where the projector is takes a h4 bulb but now the projector takes a h1 bulb. Is there anyway to make the bulbs work?
@@flyryde lol that's not what I meant. What I mean is the stock bulb used to be a h4. But since I installed the projector the projector takes a h1 bulb. Is there a way to make the h1 bulb work? I'm assuming I would need some sort of harness or adapter because again normally the connector is for a h4 bulb if that makes sense.
Carlos Trevino got it. So you have a 3 wire connector, that runs the high and low beam normally. The highbeam wire when activated can be run to the solenoid wire (guessing you have a bixenon projector), BUUUUUUUUT... you’ll also need a rectifier diode (look that up on Amazon) to send power from the highbeam wire to the lowbeam wire, to make sure your H1 bulb, or at least the ballast or driver powering that bulb, still gets power during high beam. Most times H4s need this to be converted to run high and low, otherwise you lose the low beam when the highs are on. Solenoid will work... but no light, haha.
What about BMW's "Laser" beams/lights? Can you do those kinds of mods on these, like for a 2019 M4? Also, the 370s come with HID xenon lights, what about cars that come with "real" LEDs like the Swift Sport 2019 on these the projector lens is not circular it is somewhat of a hexagonal shape.
so YOURE the GUY that makes me hate other drivers.
Ramzi Aaron how so?
The lines in the lens actually help to aim the light output more precisely, so it doesn't blind oncoming traffic. Do you go out and test your creations to ensure you aren't actually causing issues and being a general dick to others on the road?
I hope so, when I mod stuff, I do it with an aim to not "be that guy" that is creating issues where none needed to exist.
I love your mods, but take a min to ensure that the mods you're doing don't cause issues for others. When you think only about how cool it looks for you and to hell with everyone else, you create momentum for overreaching and needlessly asinine laws to get passed.
I’d like to first give a legitimate acknowledgment that what you both posted was understandable and seemingly for the good of others. Here’s where I get real, and I promise, I’ll make a video on this, not only to correct anyone that’s confused, but because I genuinely DO care about you guys learning something.
So about getting real, the aspect of this video referring to “blinding” people, is in reference to someone standing directly in front of your car looking at about a 45 degree angle down at the headlights with the low beams turned OFF, demon eyes on, with enough “blinding” light to catch your general attention, more like a “woah, what was that?”
The part of the video where I talk about Fresnel lenses versus crystal clear, I challenge you to first research, then get first hand experience, then come back with any valuable knowledge to correct anything in this educational video. A clear lens projector will be found on certain projectors, such as the JDM or Euro spec 2015+ GTR lights compared to the factory North American spec lights of the same year. The difference in the two compared side by side will show exactly one difference: Clarity.
You can see the output more clearly, where it is designed to go. Not up in someone’s eyes. Not up on stop signs and back windows of cars like all the DBag truck drivers with reflector housings and HID/LED “upgrade” bulbs...
Clarity on the road, and specifically the cut off line. The absence of the lines/dimples/frosted pattern on the projector lens, allows for a sharper line, with a bluer “prism” or “flicker”. You’ll notice this as well from many current LED equipped factory headlights, or Luxury cars with HID from years past. They have sharper cut off lines.
That is what the clear lens gives you. All the keyboard warrior talk, or tisk tisk BS uninformed concern that will continue to be added to this video is both expected (sadly) and yet understandable.
Lastly, if you saw this on the road, you wouldn’t hate me. You wouldn’t run me over. You wouldn’t say anything to me. You wouldn’t correct me, or frown. You’d walk past the car, notice some glowing lights with a weird pattern, and either like it or not care. If you were to visit my shop and see this kind of custom work in person, you’d say the things inside were cool and you were glad to have stopped by and met me.. and that I was bigger in real life than you expected. That is all.
@@flyryde I was referring to being blinded by the lights but I was really just kidding around. I think it looks great and I am also jealous of the people who have nice cars with cool ass lights on them, as anal rampage stated because I actually think they look dope. good work brotha.
Anal Rampage that moment the the content creator fights back and you gotta be like nah fam just joshing ya
I've come to determine the quality of a video by three points. 1. Was the content put together well? 2. Was I entertained/educated by what I saw? 3. Was I left me wanting more? Your work/content is great, keep up the good work.
I actually appreciate all the tips and tricks you put in here. Who knew watching a 25 minute RUclips video would make me a demon light enthusiast. I always wondered what was in the projector that caused the cutoff look. I thought it was the lens but in reality it's the window in the back. Which I'm guessing is like a shutter.
This channel is outstanding.. I did some DIY purple underglow on my FZ6 and I'm addicted to modding now. I've subscribed, I'm going to get good at this and do the work on my friends machines for their birthdays. You're an authentic badass my man!
Did you get good at it?
Your videos gave me something to do while I'm stuck in a chair. It's been so fun that it's made me want to open my own shop!!
Survivor 602 dude hit me up on IG or Discord and tell me your story 🙏
@@flyryde for sure man! I'm looking you up on IG. Lol you'll have to bear with me it's a long story I'll tell you as best I can and send you some news articles. I also have a kinda half-assed video on my channel about it.
I just used a piece of honey comb vinyl on the back of my projector lenses. Its much more cost effective and can be taken off if you decide you wanna go a different route with your etched lenses. This was my first ever headlight retrofit on my Q50 and turned out perfectly. cost me $450 all together in parts and the install wasnt that difficult. Just time consuming. The parts i used for my build were the Lightingtrendz flow series rgb kit and custom dynamics demon eyes.
This sounds light a great idea until you realize what heat does to vinyl. it will probably look cool at first but give it time and you'll see peeling.
Where do I buy the honeycomb etch headlight from?
I actually line that entire inside perimeter with aluminum and helps a little with reflecting the light and fills it well
Retroworks Lighting makes sense 🙏 thanks for the tip brother!
@@flyryde shoooott I'm learning a ton from you man! I'll send you a pic of the set I just finished with that same demon eye setup of the internals. Modded shield and tuned as well! Turn signal lens retrofit with my "ghost etching" mod hehe
Man they look sick man awesome job plus love the fact that u have a 24:45 min video without any ads at all.
watch out he'll take your 0.03 !!! lol
Christopher McDonough I forgot to stuff in the 1 ad ever 3 minutes 🤦♂️ how am I gonna pay for my lunch now?
@@flyryde I'll take you out to lunch =D
Any idea how big lenses I need for a q50? Is it 2.5 or 3in
Chris great stuff man. Just one quick comment about the Fresnel lens. The lines in the lens are there to bend the light straight so it doesn't flood in all directions. The lines do nothing to soften the light. Essentially with a Fresnel lens you can direct the light without blinding oncoming drivers. A full clear light is a flood lens and lets light go in all directions looking brighter but in fact it's the same intensity as the Fresnel. Might be safer for cars driving towards you to have the Fresnel with honeycomb etched in it. Anyway love the channel and content! Keep up the great work man!
I love that you sing while you work. You make electronics fun!
Aw dummy
Hi, any place where I can buy only the lens (glass) with the honeycomb model? Thank you!
Thcconcepts.com or search them up on IG thc_concepts
@@foggboi1928 thank you so much ❤️
Nice work:)
I work for a medical company and I build prototype vein finder machines. We also use highpower leds and for edging where wires make 90 degree turns an epoxy it's used. Not a fan of double sided tape for an area that is exposed to high heat.
The great thing about tape, is it works so well, and still, it’s not permanent. Glues and more hardcore adhesives basically are a commitment to always keep it the same, even if the product fails down the road. Not fun to pull parts out that are epoxied in, but it’s definitely something that happens.
@@flyryde totally understand. Agreed:)
I think that 3M double sided will generally hold up, but the electrical tape that its adhering to generally wont. You know what they say about the weakest link in a chain, if that electrical tape comes off, which it probably will in that scenario, the double sided goes with it no matter the strength of the double sided. I don't think most think about that.
@@flyryde it looks good man, Have you ever tried hot glue though? Im sure the tape will last plenty long but i love me some hot glue when im wiring.
Shawn Tame hot glue inside a hot headlight is never a good idea my friend.
The clear lense are nice, were would i be able to find a set? Any link for that?
I have a question and I need your advice please, I have 2011 Chevrolet Cruze and planning to install LED projectors but I do not know if that will create any electric issues or any errors. Kindly advice me on this. Thanks.
Where did u score the etched lenses ?
In the heat of Arizona, I can’t trust 3m or double sided tape to hold my leds lol. Any ideas for a more permanent mount
Believe me I can watch what you do all day and I will never get bored of it
God bless you
That’s awesome, lol thanks Sam 🙏
I have 2 questions.
I would like to get a lens like that with 300 etched on it. Could you tell me where to contact the company you used to do your honeycomb pattern. The 2nd question can and is it ok to change the light to and led light?
Man, you do a crazy Michael Keaton impression. Nice to hear Batman instruct me how to mod my headlights!
What's that liquid you dip the wires into after you squirt flux on it?
For those wanting to ditch the terrible stock projectors - you can use the morimoto d2s 5.0’s with custom mounting brackets making it plug n play. You can also get the deamon eye mounting brackets as well. Lightwerkz has them!
Hey quick question what did you use at the end to test the lights with the clamps
and where do i get this honey comb glass?? looking up thc, and i get lights to grow some bud lol.
Where do you buy those led circuit boards?
So this is just to light up the lense? I have Halos so they would be around the lens I can still have the demon eyes? I'm asking because our state has a law against colored headlights
Do you wire the demon eye wires too the headlight wires?
Probably a silly question do you make custom headlights for people like can I hate to have you build me a set of custom headlights
Hey my friend do you see lights done for purchase or can people send you there lights and you custom make them to there preference?
So how do I get that glas/plastic off in the best way? And is there a link to the stuff in this video?
what up chris! you did work on my buddys gtr a couple years ago. your video popped up in my feed so it looks like your doing well!! keep up the good work bro
Cherry Poppins 🙏 that’s dope dude, what’s your buddy’s name?
@@flyryde Paul. You modified his factory headlights and then he bought new headlights that you also worked on. It was fun hanging out while you worked haha
Cherry Poppins Carlan!!! What’s up brother, super cool to hear from you dude! Haha, I always remember you saying my neighbor was “FIRE”, lol 🤣
@@flyryde hahaha yes!!! that sounds like something i'd say. and super good to hear from you too, you have so many subscribers all that hard work is paying off.
subbed!
that ring light you use gives YOU demon eyes lol
HardSpaghetti 👹
Shit, beat me to it.
Giant Of The East 😈
Actually I think they would be angel eyes
No it doesnt. The "halo" is for angel eyes smh. Stop making shit up or stop listening to ignorant people.
Hi, would you be able to work on my headlights if I ship them to you?
From your experience , can you tell me which demoneyes is brighter between the Colormorph RGBW or the Profile prism RGB? I think the Profile Prism come with a reflector to help direct the light toward the front lens to make it more brighter, but is made to be installed on the top of the projector. I would like to mount a Profile Prism on the bottom of a Morimoto 4.0 projector, but am afraid the 9 leds on the board would be visible through the projector lens. One of the problems I see with demoneyes is the ability to be bright enough to see during the day.
Will the heat from the HID bulb damage the LED?
what if you put one demon eye on the bottom and one on the top would it shine on the road and also have a blinder effect?
Look at the Genesis Coupe Headlight in the beginning. The demon eye has one of each. We did an Aston Martin last year with 2 demon eyes in each Projector. It was cool , but kinda seemed like a lot of extra effort for not much different of a look.
Who can we order the etched lenses from?
I know this is probably not common for u and it probably a bit to ordinary, but do u have any idea how to make vw polo 6n headlights cooler without changing them out for aftermarket ones.
Thank you in advance
I have a blue and a red led demond eye that I bought a long time, ( one color each does not change color like your ) don't remember from where. I have not use them yet. Would it be possible to intall both in the in each proyector? Have you done this? How would it look? Thoughts!!
It’d give you blue, red, and purple. If that works for you I guess it’d be worth it? Or you could sell em and get something that does it all.
Could you use hot glue to hold the led in place inside of the projector instead of the 3m tape?
Frederik Grosskopf what happens to hot glue when it gets hot 😉
Never use hot glue on anything headlight or tail light related. I used to early on, and I remember seeing lights I built a year later with all sorts of hot glue runs on the bezel, lol, such a fail.
If not tape, I typically recommend using metal wire to tie parts down since it won’t fail over time.
FlyRyde I guess I didn’t even think about that. Thanks for the info!
Hey buddy you mentioned the focus st/rs lights have you ever opened up those headlights. I’m getting ready to tackle this, and I was wondering if you had any specific tips on that headlight
Aweosome video! I was around to watch the interior of the projector since my xenon lights don't light as I think they should anymore... So, I'm thinking the reflectors inside are toasted.. I'm thinking on opening my headlights and see if that part is replaceable or to chrome it back or even wrap it with aluminium/chrome reflective tape before replacing the whole thing...
This will help me planning my move.. Thank you!
I see the S13 coupe taillight behind you. Do you make some cool LED taillights for the s13 hatch?
Would you happen to know the lens size on a 2019 subaru wrx premium? 3"?
Is there something like this for Golf MK7.5?
Have a question. Can I upgrade the projector to an led projector? I have an 08 g35 which probably has the same bi-xenon projector. I don't just wanna change the bulb as the light output won't be up to par and I don't wanna upgrade to another xenon as the warmup takes time.
@flyryde i just want to ask where can i buy that honeycomb lens?
Can you make a 3x5 led headlight? 4x6 wont work for me.
Have you done any s197 mustang headlights... the early version
I have not my man.
Do u have any videos for an 04 GMC Sierra
Can you do a video on a 2008 Nissan Pathfinder since no one makes custom lights for it?
Any link from where I can get those demon eye
Im a simple guy i see how to build demon eyes i sub
StaxxxCmd 👊
Nice video, I had a question. I'm in the middle of swapping out my OEM projector lenses with high performance etched ones and I cant figure out how to get the factory lense out. If you could help me out that would be great. Thank you.
Drill a hole just big enough for the protruding led to fit. Mount the circuit board on the outside with some good adhesive sealant to seal the bulb. It’ll be lower and accessible. Not trolling just think it would be easier and neater.
Can I connect rgb wires to two separate demon eyes and stick one at the bottom and one on the top? Wouldn’t that add visuals on the ground and the eyes?
Hey man where could I buy that demon eye light
Any idea for mazda cx7 2007 head, tail and fog light??
You do custom work for others?
If a demon eye is mounted at the top of the lens, it will still color the lens, right? Just not shine light into your eyes.
Chris Bowen yessir! In some cases it will cast an interesting pattern on the ground. Kinda hard to match up perfectly side to side though.
Can you make etched projector lenses for my 2015 mustang?
I got me a 97 civic hatch and got the stock headlights, you think they'll fit?
I gotta question man, I have a 2016 Silverado and just got the demon eyes, but I’m on 35 inch tires and an 8 inch lift so the headlights are just about eye level, would you recommend the bottom mount still? Or would it even make a difference with the truck being so high?
Why would you not use an epoxy to secure your circuit board rather than double stick tape? My worries would be the heat effect on the tape and long term life of your installation. There are some epoxies by Devcon that are heat rated also.
You’re missing one monster piece of the puzzle my friend, one that only comes from experience. You’re assuming that the part you want to ultra secure in place is not going to have any issues ever, and that much like a diamond being set into a piece of jewelry, this little LED board is perfect and will never experience failure or need to be replaced.
Tape works great, it doesn’t all the sudden get tugged on by headlight gremlins inside the light, it’s secure yet replaceable, and it’s not messy. Practicality and efficiency my dude. Beats out overthinking and overbuilding all day every day 👌
Love your vids. I’m wanting to do this to my 370. I didn’t see any links accompanying the video. Where can I get the demon eyes leds and clear projector lenses? Thanks in advance.
Awesome instruction video. Would you be able retrofit projectors in a set 08 euro lights? There is aftermarket projectors ones but they are one piece instead of 2 piece and turns built in instead separate like stock.
Dude id love to do this to my Z but im terrified to open up the factory headlight assembly. Its funny cause I do everything else on my car myself but im just scared it'll mess them up. I havent seen much about your business yet but could i mail my headlights to you to get done?
How much do you charge to do a demon eye, a angel eye, and an led strip so it looks mean af?
Are you aware of any retrofittable LED projectors that dont have LEDs built in, so you could use a PnP LED like the diode dynamics SL1 i already own? Aftermarket projector housings im looking at are meant for halogen, and im told the projectors in them are trash. Is it just the projector glass thats junk? If it helps, truck is 2006 gmc sierra, and am told h1 mini 7.0 is the hid equivalent. Thanks in advance
Hi bro we’re you get the light I need rush help my please 🙏🏼
when can i get that lens, kindly share a link please
Can I please get a link to buy honey comb lens and rgb demon eyes?
i have a 1999 eclipse rs with projectors can i get every thing to do the same for that car
How many demon eye boards can be run off of one controler? So they sync up.
How do u install them in a challenger??
The real question is, can we order it and it’ll be done for us or do we just order the lights and we gotta do it ourselves?
on your daily driver do you have any custom lights
Matt Theman I don’t spend money on cars. At this stage of my life, all money goes back into the business or to my fam 👌
@@flyryde dont know is that sad or not. Not saying that your poor but it's sad you have a such passion against cars but don't have your own custom car. But at least your wise and put that money to better use👌
Interesting vid. But if steel touches those open solder joints it wouldn't blow the led like you stated though. It would blow a fuse. The Led would be fine. Why not minus all the weird sticky tape and bubblegum and just use a good epoxy to mount the led.
Hey, what's up. Do you know how powerful LED on this thing? I mean in watts.
Would u build one for a Tacoma?
So all the lenses are the same? Or which ones fits for 2011 f-150 head light
Does a cristal clear Lens performs better than the original lens?
Will these lights be visible when we switch on the projectors?
How can I get some customs for my G37. I need the lens and halos maybe an eyebrow set up as well
I just installed a projector into my stock g35 coupe headlights and originally the socket where the projector is takes a h4 bulb but now the projector takes a h1 bulb. Is there anyway to make the bulbs work?
to make the h4 bulbs work in the little h1 slot? That'd be a hard no my friend.
@@flyryde lol that's not what I meant. What I mean is the stock bulb used to be a h4. But since I installed the projector the projector takes a h1 bulb. Is there a way to make the h1 bulb work? I'm assuming I would need some sort of harness or adapter because again normally the connector is for a h4 bulb if that makes sense.
Carlos Trevino got it. So you have a 3 wire connector, that runs the high and low beam normally. The highbeam wire when activated can be run to the solenoid wire (guessing you have a bixenon projector), BUUUUUUUUT... you’ll also need a rectifier diode (look that up on Amazon) to send power from the highbeam wire to the lowbeam wire, to make sure your H1 bulb, or at least the ballast or driver powering that bulb, still gets power during high beam.
Most times H4s need this to be converted to run high and low, otherwise you lose the low beam when the highs are on. Solenoid will work... but no light, haha.
@@flyryde thank you so much man! Big help 😤
can u add both angel eyes and demon eyes to a projector?
What brand is that demon eyes?
What about BMW's "Laser" beams/lights? Can you do those kinds of mods on these, like for a 2019 M4? Also, the 370s come with HID xenon lights, what about cars that come with "real" LEDs like the Swift Sport 2019 on these the projector lens is not circular it is somewhat of a hexagonal shape.
Could you guys do something for ps13 Silvia projectors?
hello !!!
where do i get the honey comb lens for my 370z ? can u send me a link ??
Hi Chris Did you ever customize a Toyota yaris tail lights?
You are you based from? Would love my charger r/t headlight done
Where’d you get the honeycomb lens
How do you wire these to the car.?
what is the lens size ,, 2.5 or 3 ?
Where can I find that honeycomb glass leds
@THC_concepts on IG
Do you have a video of your test bench? I’d like to know your setup when testing your builds
where canget a set of these that will fit 350 projectors?
Can you get the entire projector to purchase