Building CUSTOM Mazda 3 Headlights! (M4 Halo's | RGB | LED Strip)

Поделиться
HTML-код
  • Опубликовано: 29 сен 2021
  • The long awaited project, and underrated to say the least. My fully custom Mazda 3 headlights are built and ready to roll. Here's a basic run through on how to build your own basic set of custom headlights.
    Halo's: amzn.to/3AU9TFT
    LED Strip: amzn.to/3kVRNhb
    Thank You For Watching!
    ► Subscribe: goo.gl/pKiz53
    ► Merchandise & Stickers HERE:
    - Canada: bit.ly/2GBRjar
    - US: ebay.to/2PuHIX7
    ► McGill Racing Division's MERCH:
    - mcgillracingdivision.com
    ► Follow Me!
    - Instagram: goo.gl/SfsiGA
    - Twitter: goo.gl/qGEQFe
    - Facebook: goo.gl/qHnGGz
    - Twitch: goo.gl/fDCA9A
    Hope You Enjoyed!
  • Авто/МотоАвто/Мото

Комментарии • 121

  • @dovahkiin3216
    @dovahkiin3216 2 года назад +22

    You inspired me to do this to my 3 like 2 years ago now I’ve also done it to my speed ! Everyone loves them, one of the best mods I’ve done

  • @jacelawton4774
    @jacelawton4774 2 года назад +27

    These came out so good! Dude it makes me want to make my own custom lights 😍

  • @Alphebetize
    @Alphebetize 2 года назад +22

    This is the content we were promised.

    • @ColtonRichter
      @ColtonRichter  2 года назад +4

      This is the content I provide 😎

  • @ElZarDelComercio
    @ElZarDelComercio Год назад +2

    I'm glad still are outhere people that makes things by themselves. Nice work.

  • @chrisjames5459
    @chrisjames5459 2 года назад +5

    Watching your videos get me so excited for modding my Mazda 3 🤩

  • @DJBla2e01
    @DJBla2e01 2 года назад +5

    Nice. Did custom headlights on my 2nd gen 3 about 2 months ago, and I just love them! All I did was paint the insides black and put 1 pair of round switchback halos in. With my LED switchbacks I already had, it almost looks sequential, as it’s got a slight delay compared to the halos 😂
    I wired my halos up to turn on with the ignition so they act as DRLs (which weren’t available from factory in Australia until the 3rd gen), and added a 30A SPDT relay so they turn off with the parking lights/headlights; considering how bright they are, I don’t wanna blind everyone at night. Also, the fuse I tapped into has a 20 second delay after turning the ignition off, which just adds to the looks, and also helps me see where I’m going when getting out of the car at night 😅

    • @ColtonRichter
      @ColtonRichter  2 года назад +2

      Great idea on the wiring side of things, that delay would be sweet for a daily!

    • @lamalucian7733
      @lamalucian7733 2 года назад

      hey man do you have any pictures? I'm wanting to do my gen 2 but blacking out the housing is scaring me

  • @dietYAKUZA
    @dietYAKUZA 2 года назад +3

    Hello,bro
    I became the owner of 2004 Two-seater Mazda3.
    The modification of this headlight is the best.
    I will try to make this😤
    From 🇯🇵

  • @brad5316
    @brad5316 Год назад

    I am simply blown away by your video!
    Thank you for sharing this information and giving me ideas on what I would like to do!!
    You are giving me hope on changing the looks on my old mini truck!!
    :)

  • @_dondie_
    @_dondie_ 2 года назад +5

    A VIDEO THAT UNITES SUBSCRIBERS. FINALLY WE HAVE ARRIVED AT THE PROMISE LAND 💯💯💯 THANKS COLTON!!!

  • @mackue8913
    @mackue8913 2 года назад

    DUDE!!! I love your setup. It’s so dope LOL!! If you do the demon eyes and the hex and the led strip. How did your hookup all the wires??

  • @SkrillaSwanky
    @SkrillaSwanky 4 месяца назад +1

    @ColtonRichter will this 4pc 9005 H7 LED Headlight bulbs For Mazda 3 2004 2005 2006 2007 2008 2009 Combo Bulbs fit in my 2007 Mazda 3 i sedan 2.0 stock bummer aftermarket Headlights ?

  • @thebutteredcroissant
    @thebutteredcroissant 4 месяца назад

    Heyo, nothing as crazy as what you're doing, but if I were to buy some housings meant for Halogen bulbs without the HID Ballast Module would I just need to mount that from my current Xenon headlights or is there more that I'm missing?

  • @cleanairrepublicph1337
    @cleanairrepublicph1337 8 месяцев назад

    Hey, man thats definitely hot upgrade in your headlights. Appreciate where can i get those stuff M4 in the market thanks.

  • @cartscandylimerickcartscan5517
    @cartscandylimerickcartscan5517 2 года назад

    Hi can u send the link where u got the head light strip

  • @cleanairrepublicph1337
    @cleanairrepublicph1337 8 месяцев назад

    Hi Sir which size or model specifically for M3 sedan. I was trying to look at Ebay but a lot of model of M4 Halo was there. Appreciate your suggestions thanks

  • @BradzOfSheffield
    @BradzOfSheffield Год назад +4

    What size did you get for the M4 style halo ?

  • @agamadden123
    @agamadden123 Год назад

    Can i jum every light to the main head light and or the beam light?

  • @jongomez1915
    @jongomez1915 2 года назад

    Thanks bro.

  • @DownSouthRuckus
    @DownSouthRuckus 2 года назад +1

    You provided links for the Halo’s and the LED strip. What about the RGB purple light in the middle?

    • @ColtonRichter
      @ColtonRichter  2 года назад

      I did a video on this a few years back, they're from vipMOTOZ on eBay & I don't believe they sell them anymore.

  • @alexdmjvids4603
    @alexdmjvids4603 2 года назад +1

    Hey man great job was wondering is the mazda 3 headlights compatible with a mazda protege5 looking to put some halos on my protoge5

  • @haisee
    @haisee 5 месяцев назад

    Did you ever connect the remote starter for the halos? I bought a kit of off aliexpress which has a similar instruction manual as yours and its says fade on/off meaning they turn on when I unlock the car which is quite cool but Im not really sure were I would hook that cable to. I would appreciate any kind of help, keep up the great videos you give me soo many new ideas for my mz3 bk

  • @BenDover-ot9yv
    @BenDover-ot9yv 2 года назад

    I'm planning to do these for mine. What happens when the halo or dlr strip dies out - how do you replace it, do you have to remove the whole cover and redo it? Also do you think wiring would be complicated for a first timer, and is the in-cabin switch necessary? Did your headlights fog up yet? Thanks, Ben

    • @ColtonRichter
      @ColtonRichter  2 года назад +1

      If they die, they die, you do the whole thing all over again.
      Wiring isn't complicated, there's lots of help out there too.
      Cabin switch is not necessary.
      Headlights haven't fogged up, but I also haven't driven the car since.

    • @BenDover-ot9yv
      @BenDover-ot9yv 2 года назад

      @@ColtonRichter I appreciate you taking the time to reply to everyone 🙏 Last question, if you have the halos, you can delete the current headlight bulbs right? And just use the halos and dlr strip. Thanks

    • @ColtonRichter
      @ColtonRichter  2 года назад

      Nah man those halo's ain't going to project light like your headlight bulb

  • @florianhartmann1239
    @florianhartmann1239 2 года назад +1

    Found this Channel a minute ago... Nice Mazda 3 Stuff... Hell yeah want to do so much of it right now... Just regulations and laws saying no.

  • @isaurovillarreal5693
    @isaurovillarreal5693 2 года назад

    Make me some I loved them !

  • @takatsomaloka5218
    @takatsomaloka5218 Год назад

    Can u do it on mazda cx 3

  • @JJ-vm4wt
    @JJ-vm4wt 2 года назад

    Broo this is so dope. You can do that with any car?

  • @nahum1986
    @nahum1986 9 месяцев назад

    Yeah nice job mate! can you ecplain the wiring and drive connections please? thx

    • @ColtonRichter
      @ColtonRichter  9 месяцев назад

      Lighting comes with instructions!

  • @dannyboi1672
    @dannyboi1672 2 года назад

    Gawdddd 🤤

  • @masonk1l023
    @masonk1l023 Год назад

    Where do you get those red/silver red/yellow screws that are holding down the bumper and fenders?

  • @nathanielr9073
    @nathanielr9073 2 года назад

    Gonna try to do something similar to My 13' (2nd gen) Mazda 6. I got bit by the mod bug 😅

  • @coleworth4765
    @coleworth4765 Год назад

    i know this video is older but do you know the right size if I wanted to do circle halos?

  • @Higuys23344
    @Higuys23344 Год назад

    That juice box looks so refreshing

  • @btwitzisaiah7266
    @btwitzisaiah7266 2 года назад +1

    These headlights are the same as the gen 1 mazdaspeed3 right? If it is, then the process would be exactly the same. Correct?

    • @ColtonRichter
      @ColtonRichter  2 года назад +2

      The shape is different, but the process is the same!

    • @btwitzisaiah7266
      @btwitzisaiah7266 2 года назад +1

      @@ColtonRichter well thanks for the reply and great final product.

  • @thecheese796
    @thecheese796 Год назад

    Hey man quick question, can you use the halo for a dipped light and use a bulb for a full beam or is that what was done here in this video? Thanks

  • @djaveragejoe
    @djaveragejoe 2 года назад

    Nice

  • @cleanairrepublicph1337
    @cleanairrepublicph1337 2 года назад +1

    Damn it's hot 🔥 where can we get those crystal halos BMW thanks

    • @ColtonRichter
      @ColtonRichter  2 года назад +1

      Amazon & eBay, other actual name brands as well

  • @730wylin5
    @730wylin5 Месяц назад

    Where did you get the RGB bulb? I've been looking for a while now

  • @dose_of_j
    @dose_of_j 2 года назад +1

    Niceeeee

  • @ArifKhan-xy3cn
    @ArifKhan-xy3cn Год назад

    Hey bro, where can I get an ecu for mazda speed3 gen 1 manual (2005)

  • @therelief4410
    @therelief4410 Год назад

    Hello can i order one i got a mazda 3 too

  • @patrickstar5040
    @patrickstar5040 2 года назад

    I am trying to buy headlights and it's all saying fits sedan, what is the difference between hatch and sedan. I cannot find anything hatchback

    • @ColtonRichter
      @ColtonRichter  2 года назад

      The shape of them, they are different though.

  • @lenadrt88
    @lenadrt88 9 месяцев назад

    Bro, i know this a dumb question but for the switchback. Ground wire goes to any metal contact surface of the car? Because there's two wires, does yellow wire go to the signal positive wire, & red goes to headlight positive wire?

  • @shakirbrown8167
    @shakirbrown8167 2 года назад

    Yow bro I have a mazda 626 capella gf can you help me with a design for it am creative but I need help please

  • @djviper2232
    @djviper2232 Год назад

    Anyone know where to buy premade headlights with halos?

  • @natthaphonnoble7946
    @natthaphonnoble7946 11 месяцев назад

    Damn really tryna do this for my 2011 8th gen accord coupe

  • @rockysmumakagma
    @rockysmumakagma 2 года назад

    😎🔥

  • @mrrith6840
    @mrrith6840 2 года назад

    Is this the same on mazda cx-3

    • @ColtonRichter
      @ColtonRichter  2 года назад

      A lot more mechanics on the housing if you have automatic leveling headlights, and HID's but other then that it's somewhat the same concept I would think

  • @vonbryanalicaya6374
    @vonbryanalicaya6374 2 года назад

    Hey bruh where in British Columbia are u? I will bring my 06 mazda 3 for headlights customized.

  • @big_d3734
    @big_d3734 Месяц назад

    what did u use for the rgb

  • @Misguidedaliengamer
    @Misguidedaliengamer Месяц назад

    Will these fit ms3 gen 1?

  • @liamthemckee
    @liamthemckee Год назад

    Still only a 2 liter I like the extra power and reliability of my 2.3

  • @UnknownName-ob4jo
    @UnknownName-ob4jo 2 года назад

    What rims and size you have bro

  • @armaankandola5835
    @armaankandola5835 2 года назад

    hey! thats my first aid kit in the shop... i want that back

    • @ColtonRichter
      @ColtonRichter  2 года назад +1

      no, i need it apparently, real bad

  • @andrewlineberry2090
    @andrewlineberry2090 2 года назад

    hey how do I know what type of headlight I have?

    • @andrewlineberry2090
      @andrewlineberry2090 2 года назад

      looking at buying anzo halo leds but it's saying not hid compatible idk my car has no light range and its yellow

    • @ColtonRichter
      @ColtonRichter  2 года назад

      Look up the difference of halogens, and HID's

  • @sky_alio
    @sky_alio Год назад

    лучший из лучших

  • @Castiel_Pr
    @Castiel_Pr 2 года назад +1

    👍🏻

  • @TBPony
    @TBPony 2 года назад

    Dude I'm so jelly I'm strawberry flavored

  • @bahamianboitonio7027
    @bahamianboitonio7027 2 года назад

    🤟🏾🤟🏾🤟🏾

  • @cadencossaboom8819
    @cadencossaboom8819 2 года назад

    Watching ur videos makes me sad that I have no money to put into my mazda 3

  • @mazdaspeedg2380
    @mazdaspeedg2380 2 года назад

    I want to do this but don’t trust myself at all lol

    • @ColtonRichter
      @ColtonRichter  2 года назад

      Send it, you seriously can't mess anything up unless you crack the lens which is replaceable

  • @xDRBx
    @xDRBx 2 года назад

    Howdy

  • @cadencossaboom8819
    @cadencossaboom8819 2 года назад

    What Headlights do you have? Are they the oem or what?

  • @kaydssantos7574
    @kaydssantos7574 2 года назад

    VI Alert

  • @SaintChicagoJay
    @SaintChicagoJay Год назад

    This looks mad ghetto not gonna lie

  • @Hotandcrunchy
    @Hotandcrunchy 2 года назад

    In germany u would go straight to jail

  • @elsachi1334
    @elsachi1334 2 года назад

    I dont understand people who paint headlight reflectors. Why don't you just drive with your lights off at this point, I'm sure you're going to look more "cool"

    • @brandanfiederlein3390
      @brandanfiederlein3390 2 года назад

      It’s a reflector, it doesn’t even light up

    • @ColtonRichter
      @ColtonRichter  2 года назад

      Wellllllll the car won't be driven on street sooooooooo yes mor kewl

  • @SoloBench
    @SoloBench 6 месяцев назад

    That screwdriver is really annoying me

  • @wolfdmnd7239
    @wolfdmnd7239 2 года назад +2

    Wish i knew how to do stuff like this 🥲 looks way to good

    • @ColtonRichter
      @ColtonRichter  2 года назад +1

      All takes time, take a shot at it!

  • @user-di8te9pr7o
    @user-di8te9pr7o Год назад

    Колхозище!