I hate DJI but couldn't get moonlight or caddx googles (I have vrx) I just sucked it up and ordered O3 for new build. DJI about to upgrade again and leave behind Vista and maybe O3 too.
Blury camera? Only way you can have a blury camera is smudged lens, scratched lens, lens is out of focus (only possible if you've opedn up the camera lens side) or if you're possibly just in low power mode with focus mode turned on.
Bonjour j ai un écran noir mais j ai toujours mon osd j ai changer le câble coaxial plusieurs fois mais j ai toujours l écran noir si jamais vous avez une solution merci beaucoup
Mmm... the rx and tx wires are then correct if you have OSD, if you do not have video then you'll need to check the connector of the coaxil cable... might be that you have a bent pin...
I ordered 150mm cable thinking it be 50mm longer for 10" building. Then heard mad tech saying they measure different the 150mm cable most likely the stock cable 😢
Just a side note that unless you are using an antistatic pad with arm band, make sure to earth yourself properly before doing this to minimize the risk of frying your boards. Just touch anything metal around you
I don't understand why there was a need to remove the cover from the thermal paste? The wire is easily changed without this. the wire has its own separate cover, which does not affect the rest
Thank you very much for this tutorial. You made changing the cable on my dji o3 air unit super easy.
So happy to hear that. Thank you for commenting and letting me know!
Now that’s a Royal Pain in the Arse to accomplish.I think I will never do that during my FPV days.
Hopefully you don't have to, but digital is the way to go and analog is sadly dying.
Where does the unit get hot more? The DJI logo part Top Side ? Or the bottom part ? Thanks
Top and bottom center. The heat comes from mainly from the center
I’ll remember this video and n 2 years time when I catch up to the 03 system 🤣
haha don't you worry, the process is exactly the same for the current Vista's and Air units.
@@InfinityDrones 😂another great and clear explanation bro 👍
I hate DJI but couldn't get moonlight or caddx googles (I have vrx) I just sucked it up and ordered O3 for new build. DJI about to upgrade again and leave behind Vista and maybe O3 too.
Hello sir i do exactly what you done but i have a blurry camera result do u have this issue ?
Blury camera? Only way you can have a blury camera is smudged lens, scratched lens, lens is out of focus (only possible if you've opedn up the camera lens side) or if you're possibly just in low power mode with focus mode turned on.
Great video man.
Thanks man. Really appreciate the feedback!
Sir thank you so much. My dji avata has black screen. Do you think it is coaxial cable issue? Because the gimbal wont move too
I would think it would be. check that all the cables are properly seated - sometimes they can pop loose in a hard crash.
ГЛABHOE ЧTO HE CИHИЙ ЭKPAH! A KAБEЛb 3AMEHIШb - HE БEДA😊
Thanks for the video did u run into a y issue after namely a black screen with osd ?
No issues. Black screen is usually something that's not correct on the mipi cable
Bonjour j ai un écran noir mais j ai toujours mon osd j ai changer le câble coaxial plusieurs fois mais j ai toujours l écran noir si jamais vous avez une solution merci beaucoup
Mmm... the rx and tx wires are then correct if you have OSD, if you do not have video then you'll need to check the connector of the coaxil cable... might be that you have a bent pin...
@@InfinityDrones merci du retour j ai changer le cable mais ca ne change rien 😅
@@jonathannelson2525 Sadly... I think you have a damaged connector or perhaps bent pins.
ЛИБO CXEMA BCЯ HAKPbIЛACb
@@jonathannelson2525 salut, j’ai exactement le même problème. Je vois que tu as eu ce problème il y a 2 mois donc as tu résolu le problème ?
I ordered 150mm cable thinking it be 50mm longer for 10" building. Then heard mad tech saying they measure different the 150mm cable most likely the stock cable 😢
Ah man sorry to hear... But I would say you should go for the 25 or 30 cm option
@InfinityDrones I didn't find 300mm in stock. Didn't see any 250. So ordered 200mm. Should be exact length if I'm good at guessing 🤣
@@divingfalconfpv4602 fingers crossed it all works out for you man. On a 10 inch I think it's going to be tight
👏👏👏pour le prix DJI pourrait donner le choix de la longueur du cable car ce n'est pas facile le changement
yup, i agree with you.
Just a side note that unless you are using an antistatic pad with arm band, make sure to earth yourself properly before doing this to minimize the risk of frying your boards. Just touch anything metal around you
Always! Good advice man!
Can never leave anything stock :P
Right back at ya! haha! Whats the next plan for that "truck" of yours?
I don't understand why there was a need to remove the cover from the thermal paste? The wire is easily changed without this.
the wire has its own separate cover, which does not affect the rest
You need to replace the cover with the iflight heatsink.
Thought you were going to install heat sink.. 🤷
The heat sink is literally just a top plate.
Invest in a better camera to film closer
Working on it and saving up. I get extremely little from youtube... Thanks for commenting. I appreciate it.