I've been using the NR200 P Max for about a year and I don't regret my choice. I love itx format but had enough of those cases where you can only fit one little 120mm cpu cooler. The NR200p max comes with an included 280mm AIO watercooling, a sfx psu and a Pcie 4.0 riser. Best value. Great cooling and very low noise level. 👍
@@TaxiDiver100 I should have specified with the vented side panel. Machines & More tested some configs and arrived at bottom and exhaust and top exhaust (side intake directly at gpu).
@@maxwellgriffithThe case sits on my desk, on my right side.and I found out the glass panel really soften the noise, so I'm using it... Maybe I sacrified some performance in exchange for some more silence, but that's fine for me.
@@maxwellgriffith I had it as intake and the AIO at top as exhaust and that worked really well for temps. Was even better than I thought in terms of impact.
Love that you share thoughts on Cases you can actually find in stock, I actually had a similar thought with the North and Terra and tweeted it to Fractal a while back "Hey, a North itx version, something to think about huh.." and they responded "We will certainly pass on your suggestion to our design team.", thanks for sharing and keep those build coming!
While it may not be as well-built or visually interesting as the cases mentioned here, I think the A4-H2O is also worth considering. It was fairly easy to build in even for a SFF newcomer like myself, and it's very reasonably priced.
The FormD T1 is my favorite. I ordered a titanium colored one that is arriving tomorrow. I'm still gathering parts, but when I saw the case in stock, I jumped on it.
@MarigoldAW For some reason my reply keeps getting deleted. But yeah, they have it in stock. Their old site doesn't update so you need to find their new one. I try to include it in my reply but I think that's what gets it deleted.
My favorite case of all time is the Dan Case C4 SFX and it's a terrible shame more people couldn't get their hands on it due to limited production. I got one on Amazon for $270 like two days before it dropped off and never came back. I'll cherish this case for a very long time and i'm very lucky to have gotten it.
I actually have a silver C4. It's a great case and it has no problems housing huge graphics cards. I also love the fact it supports 135mm air coolers. That said, I'm currently looking into downsizing to the Formd T1.
I loved the S300 build you did and ended up building a ITX PC for my mom taking tips from your video. It is a sleek build and the included handle really makes it a portable option.
@@ItsPhurpl yes, but easy is not necessarily the main objective for everyone. I want to be able to choose my own PSU and cooler/radiator for example and I don't care if it takes a bit longer to build or if it is more complicated.
The issue with the NR200 Max is that CM doesn't sell the case by itself. I want the interior redesign for top radiator mounting but I don't need the PSU or the AIO.
@@bri1085 If you mean the NR200P V2 I would say it's not worth the price increase vs the normal NR200, especially since it only supports vertical GPU mounting and doesn't have any advantage in motherboard and PSU compatibility.
Really nice summary of your ITX builds. I've watched all of them, and the content and production quality in your videos keeps getting better and better. Excellent stuff. Looking forward to seeing more of your work.
I wish I got my hands on a DAN C4-SFX. The Fractal Terra is kind of bad, since the noiseprofile of the slitted sidepanels is very annoying and you can't fit a 4090 (or most other cards) without downsides to CPU-cooling. Using a NR200P Sakura Limited Edition atm. My secondary PC is in a Densium 4+ V1 (5L), very similar to the Velka 3, but it is longer, fitting upto 220mm cards. 1x 4070 fits with a little modding.
I think the Lian LI Q58 shouldn't be overlooked. Built my first SFF in it and I think that for someone who has many drives, it is one of the best cases to use!
This is my itx wrapped of the year. I’ll love to see you build in one of the Chinese brand itx cases. Budget friendly but highly exceeded my expectations.. try the shiny snake s300 or s400 I’m seeing no youtubers building with these
He has built in the s300. One of the best videos on RUclips for building in that case. I bought one this past blackfriday along with parts for my son's build this weekend.
Surprised to not see the Meshroom D on the list. Especially since you got such incredible thermals on it. Awesome video, as always! Thanks for all of your hard work.
My biggest gripe with FormD T1 is for the price point they give you zero front IO... Not to mention to even get ONE type C USB you have to buy a separate kit for it at 45 dollars... Meanwhile the Fractal Terra is priced even lower at the same volume and gives you USB 3.2 and Type C.
I saw your s300 video. I will be building in it this weekend for my sons first gaming pc. I wanted something small but more budget friendly and i think itll do the trick!
I'd like to ask, is the NR 200p max offers big improvements over the nzxt h1? I checked them, and the 200p max for me costs 3 times the price of the h1. Is the price increase actually somewhat justified? I only want to build a midrange PC in it, but for futureproofing, i'm ok with the extra cost.
@@devyn.johnston ZZAW, Jonsbo, Metalfish (last two are available on Amazon too I think, not sure about the stock though) -- also I remember they also have a Ghost S1 clone as well
@@devyn.johnstonyou should check out the jimu d+, its very similar to the formd t1 but has better gpu support and cooler support (by 2mm), is a litre less in volume and is more than a kilo lighter.
I built my wifes new ITX Gaming machine in this KXRORS S400 - Mini-ITX PC Gaming Case - It's a great case that you may want to look into. The handle on top makes it a good choice for LAN parties.
The new Fractal ERA 2 looks very interesting and I'd like to see how the integrated dual SSD caddy actually works in a speed test with the new gen 4 SSDs. Hope you get around to building in this soon. Also to use the new Thermal Take SFX PSU. That could be very handy for power connections.
Great video once again dude! My favourite is the current one I have (Xtia Xproto ATX case (the V1 version). It is under 17 litres and it has everything I could ask for and more so won’t upgrade that case any time soon
Hey guys, I’m actually thinking about doing an ITX build myself (first time ever). I could really use some help on picking the right parts, do you see any problems with the following setup?: Case: fractal terra (black) Motherboard: ASRock B650i lightning WiFi CPU: Ryzen 7800x3D CPU Cooler: ID-Cooling IS-55 GPU: ASUS ProArt 4080 Super RAM: 2x16gb DDR5 Vengeance 6000Mhz SSD: Samsung 990 Pro 2tb Power: Corsair SF750 Fan: Noctua NF-A12x15 PWM Fan grill 120mm Cables: Corsair premium 600W 12+4 pin
i wonder is it also possible to mount the AIO on the T1 on the top cause having it mounted on the bottom will kill the aio slowly overtime or like swap the bottom plate and top plate around to the aio gets to the top?
As someone who doesnt use headphones and is irritated by fan noise, are these loud or can they be quiet? My current computer is a bit older now and needs replacing, and I'm so irritated by the hissing sound the fans make when I do almost anything..
I'm really struggling to choose between the T1 and the terra. I love how compact and clean the T1 is, but the Terra's walnut piece looks so good, I js don't know how to choose loll
1 month late I’m sure you already found your answer but I would eliminate fractal from your list, for the size and amount of cooling it provides, not only is it just as big as any other cases, it doesn’t support water cooling like the t1, Dan a4 h20, iqunix. I would recommend the h20 due to how safe the choice is in price/availability, cooling, size, and quality. The only annoying issue I have with h20 is the material lian li uses, just never been a fan of the material they used for their cases.
when you said you wonder about the terra having a front similar to the north and I immediately thought if the terra was 17mm longer and if the front panel was slotted like the side panels but completely walnut, making room for a 120mm/140mm slim fan.
I wish there was a case similar to the H1 v2 but with a large fan at the top similar to the series x. Mine is loud and runs pretty hot with the lack of airflow.
Any news on the NR200P V2? It was supposed to hit the market in February, but when I directly asked Cooler Master they did not even have the official specs yet. I'd like confirmation that it will actually fit my TUF 7900 XT 🙂 as PCWorld claimed in their CES video. Would be great to see this on this channel.
I recently built in a Cyberwood M1 Mini-ITX case and rather like it, but it's probably not worth covering since it doesn't stand out from other sandwich style cases (besides being made out of plywood).
hey devyn, you should check out the JIMU D+, it was originally a formd t1 clone but its very much its own case. the formd t1 actually took some features from it. id love to see you do a comparison of the two.
I really want to build a fractal terra build but I move a lot due to my parent job and because of that I am afraid that I break something while I am voyaging with them should I still get an itx pc or should I just get a powerful laptop?
Does a Gigabyte RTX 4090 Gaming OC fit in an NR200P Max? GPU specs is 340 mm and clearance on the NR is 336mm but has anyone managed to squeeze on in and done so safely?
Nice video, thank you. I'm looking to build my wife a sffpc basically for work (MS office, Internet, nothing gaming) and am looking at a MB (Asus z790) and CPU (14900k) with 64 or 96gb ram and want it to handle 2 4k monitor w/out a GPU. All air-cooled with the Noctua NH-L12S (or larger if able to). Building this all inside the Fractal Design Ridge case. However your video has given me some nicer options as I'd like to display the PC but wife only wants it on the floor. What do you think of this (pro/con) and what case (absolute favorite that she would want to display it), CPU and MB would you recommend? Thank you.
Hi man, amazing info, thank you! Thinking about mini render station fo 3dsmax + corona render based on amd 7950x and looking for a small case like lian li dan h20, Meshroom S V2 or other similar. I'm not sure it will be cooled enough, cause i need 24/7 rendering at 4.8-5 MHz all cores and max AIO for those cases is 240mm radiator, means 2x120mm fans. How do you think is it possible to make such a tiny render station?
My favourite is the KXRORS (known as Shiny Snake in Asia) S300, 400 and 500. Also I believe your channel has never featured the ITX cases from AKKLA or Mechanical Master?
Hi. I am trying to build my first PC and I happen to have 12900E CPU, 2x16gb DDR5 SODIMM and 1TB NVMe. Do have any recommendations for MB and GPU? I mainly play Ark. Thanks!
I hope you could try out more ITX cases from China as there are a ton of options there (metalfish, aklla, jonsbo etc.) I specifically found interest in the Metalfish T40, hoping you could check that one out too 😊 cheers!
The vid is 5months old now so super excited for an update next month! You should do a top itx cases in the current market. Have some categories like best budget, mid range, high end, portable, vertical, most compatible etc categories.
I always wonder why the Thorzone cases don’t make these shortlists. The materials feel significantly more premium than most of these other brands. More expensive but you get what you pay for.
Would be cool to see an Air Cooled mid range build in the Asus Prime AP201. Its such a nice looking case while being fairly affordable and it being M-ATX makes it more cost effective in terms of parts.
But it looks big for a m-Atx case. I would consider one of the more compact SAMA IM01 clones (Itek, Nox, etc). Sized and looks similar to NR200, but with m-Atx support. Although there are no recent YT builds on it for AM5, and from what I have read, some motherboards that have bottom IO are not compatible.
@@dexter_hacks The size of the AP201 is actually not that big of a deal to me , I already have an M-ATX (5700x/RX6600)build in a DLM 21 and I was thinking about changing cases so the AP201 looked appealing. Another reason im looking at the AP201 is because its one of the smallest cases I can find in local stores where I live and ive never bought anything off of places like Aliexpress and im worried if the cases comes damaged or something on how to deal with warranty and stuff , buying computer parts off local stores is a lot easier for me.
I'm am currently building it with i7-13700 just waiting on all the parts to arrive, I think it should be fine checking the compatibility on NOC site with the cooler he used it says it's fine to use.
Should had included the case from Lunchbox Gaming PC video, so compact and i got a 3080 and a i7 11700 running on it. My favorite case, amazing price and sturdy.
I've been using the NR200 P Max for about a year and I don't regret my choice. I love itx format but had enough of those cases where you can only fit one little 120mm cpu cooler. The NR200p max comes with an included 280mm AIO watercooling, a sfx psu and a Pcie 4.0 riser. Best value. Great cooling and very low noise level. 👍
Add some thin 120mm fans as bottom mounted exhausts and you’ll enjoy it even more
@@maxwellgriffith A lot of test I saw showed that it had little or no effect on temps, and increased noise. So I didn't try. Works fine as is.
@@TaxiDiver100 I should have specified with the vented side panel. Machines & More tested some configs and arrived at bottom and exhaust and top exhaust (side intake directly at gpu).
@@maxwellgriffithThe case sits on my desk, on my right side.and I found out the glass panel really soften the noise, so I'm using it... Maybe I sacrified some performance in exchange for some more silence, but that's fine for me.
@@maxwellgriffith I had it as intake and the AIO at top as exhaust and that worked really well for temps. Was even better than I thought in terms of impact.
Love that you share thoughts on Cases you can actually find in stock, I actually had a similar thought with the North and Terra and tweeted it to Fractal a while back "Hey, a North itx version, something to think about huh.." and they responded "We will certainly pass on your suggestion to our design team.", thanks for sharing and keep those build coming!
A North ITX would be godly.
@@latinlowrider59 a dream to behold.
While it may not be as well-built or visually interesting as the cases mentioned here, I think the A4-H2O is also worth considering. It was fairly easy to build in even for a SFF newcomer like myself, and it's very reasonably priced.
How portable is it?
Very portable. I fit it in a 40L backpack with plenty of room to spare (probably like 5-10 liters of extra space).
I would say looks wise it can easily keep up with cases mentioned in the video. And at the same time it's not expensive as some mentioned here.
The FormD T1 is my favorite. I ordered a titanium colored one that is arriving tomorrow. I'm still gathering parts, but when I saw the case in stock, I jumped on it.
I thought those have been out of production?
@MarigoldAW For some reason my reply keeps getting deleted. But yeah, they have it in stock. Their old site doesn't update so you need to find their new one. I try to include it in my reply but I think that's what gets it deleted.
@@ghost-type both URLs for T1 are linked in description
My favorite case of all time is the Dan Case C4 SFX and it's a terrible shame more people couldn't get their hands on it due to limited production. I got one on Amazon for $270 like two days before it dropped off and never came back. I'll cherish this case for a very long time and i'm very lucky to have gotten it.
I actually have a silver C4. It's a great case and it has no problems housing huge graphics cards. I also love the fact it supports 135mm air coolers. That said, I'm currently looking into downsizing to the Formd T1.
I think the Lian-Li Dan A4-H2o should be on this list. Is much like the IQUnix, but a bit more compact and more minimalistic in design.
I loved the S300 build you did and ended up building a ITX PC for my mom taking tips from your video. It is a sleek build and the included handle really makes it a portable option.
i did an s400 and love it
The NR200p and NR200p Max are not the same case! The NR200p has no top radiator option (without modifications), which is a real bummer.
That’s because only the p variant supports horizontal gpu orientations, which won’t allow room for top radiators d/t motherboard height
The nr200p max is hands down the easiest case to build in.
@@ItsPhurpl yes, but easy is not necessarily the main objective for everyone.
I want to be able to choose my own PSU and cooler/radiator for example and I don't care if it takes a bit longer to build or if it is more complicated.
True, which is why I’m the nr200p I just used a 280mm be quiet! Rad so it can go on the bottom and not have the potential pump orientation issue.
The NR200P also only supports 2 slot GPUs vertically.
The issue with the NR200 Max is that CM doesn't sell the case by itself. I want the interior redesign for top radiator mounting but I don't need the PSU or the AIO.
But you can just get the stock NR200
@@bri1085The NR200 doesn't support top radiators. The NR200 Max does.
@@FieryMeltman there's the v2 for that
@@bri1085 If you mean the NR200P V2 I would say it's not worth the price increase vs the normal NR200, especially since it only supports vertical GPU mounting and doesn't have any advantage in motherboard and PSU compatibility.
Really nice summary of your ITX builds. I've watched all of them, and the content and production quality in your videos keeps getting better and better. Excellent stuff. Looking forward to seeing more of your work.
I wish I got my hands on a DAN C4-SFX.
The Fractal Terra is kind of bad, since the noiseprofile of the slitted sidepanels is very annoying and you can't fit a 4090 (or most other cards) without downsides to CPU-cooling.
Using a NR200P Sakura Limited Edition atm.
My secondary PC is in a Densium 4+ V1 (5L), very similar to the Velka 3, but it is longer, fitting upto 220mm cards. 1x 4070 fits with a little modding.
I think the Lian LI Q58 shouldn't be overlooked. Built my first SFF in it and I think that for someone who has many drives, it is one of the best cases to use!
its a nice case to bad nobody has it in stock
Absolutely LOVE the ITX content! Keep it up!
This is my itx wrapped of the year. I’ll love to see you build in one of the Chinese brand itx cases. Budget friendly but highly exceeded my expectations.. try the shiny snake s300 or s400 I’m seeing no youtubers building with these
Oh man I'm just in the middle of building the s400 with a 7900 xtx!
i think hes built in the s300 before
He has built in the s300. One of the best videos on RUclips for building in that case. I bought one this past blackfriday along with parts for my son's build this weekend.
@ 10:47 you can see either the s300 or s400 I don’t remember which one it is.
He did a S300 build and it made me RUN out to get one. My favorite ITX case, but I've only built in a NR200 and Terra.
Dan case A4 & H2O(the best sub 11L for watercooling and big 4090)
I just did an SFF mini itx build using a Lian Li A4-H2O case. Ryzen 7 7800X3D and an RX6800XT gpu.
Are you still happy with it? I've been considering that case.
@@nochnoy13 it takes up very little space on my desk. Oh yeah, I’m super happy with it.
You gotta do an A4 H2O build! One of the best itx cases
Surprised to not see the Meshroom D on the list. Especially since you got such incredible thermals on it. Awesome video, as always! Thanks for all of your hard work.
He said favorite cases, which means it probably wasn’t his favorite
My biggest gripe with FormD T1 is for the price point they give you zero front IO... Not to mention to even get ONE type C USB you have to buy a separate kit for it at 45 dollars... Meanwhile the Fractal Terra is priced even lower at the same volume and gives you USB 3.2 and Type C.
your video is one of the many I watched while I was building my terra build. It was of great help. nice man!
bro, what is that futuristic monitor/display at 2:47??
not a fan of lian li A4 h2o?
10:54 what case are you holding is both hands here?
The Velka 7 case us one I really want to try on my next build! Its only a tad bigger than the Velka 5 but supports SFX power supplies!
Devyn i love your taste in design, and when my right arm heals i'm going to build one of my those small PC. Thanks young man, and yes i'm old. 64.
What mini ITX case would you recommend for XFX RX 7800xt ( 326mm in length and 58mm thick)?
I saw your s300 video. I will be building in it this weekend for my sons first gaming pc. I wanted something small but more budget friendly and i think itll do the trick!
I'd like to ask, is the NR 200p max offers big improvements over the nzxt h1? I checked them, and the 200p max for me costs 3 times the price of the h1. Is the price increase actually somewhat justified? I only want to build a midrange PC in it, but for futureproofing, i'm ok with the extra cost.
Is building and reviewing niche sff cases from Ali a consideration for you? They have a few that I feel are quite unique.
Yea I’m open to it. Do you have any suggestions?
@@devyn.johnstonI def would like to see this, especially quality wise. I just bought QUBE 500 and it’s a dope case.
@@devyn.johnston ZZAW, Jonsbo, Metalfish (last two are available on Amazon too I think, not sure about the stock though) -- also I remember they also have a Ghost S1 clone as well
@@devyn.johnston they also have fun ITX case like the Mac Pro cheese grater case lol
@@devyn.johnstonyou should check out the jimu d+, its very similar to the formd t1 but has better gpu support and cooler support (by 2mm), is a litre less in volume and is more than a kilo lighter.
I built my wifes new ITX Gaming machine in this KXRORS S400 - Mini-ITX PC Gaming Case - It's a great case that you may want to look into. The handle on top makes it a good choice for LAN parties.
Nice!! Love a good handled case!
How loud are these cases though?
I like the Fractal Ridge quite a bit. It's pretty slick looking.
thanks for these uploads! which build is your favorite and which would you recommend for someone wanting to spend under 1.5k if possible?
The new Fractal ERA 2 looks very interesting and I'd like to see how the integrated dual SSD caddy actually works in a speed test with the new gen 4 SSDs. Hope you get around to building in this soon. Also to use the new Thermal Take SFX PSU. That could be very handy for power connections.
This was actually a really good video. Informative and not full of fluff. Thank you
Great video once again dude! My favourite is the current one I have (Xtia Xproto ATX case (the V1 version). It is under 17 litres and it has everything I could ask for and more so won’t upgrade that case any time soon
Hey guys, I’m actually thinking about doing an ITX build myself (first time ever). I could really use some help on picking the right parts, do you see any problems with the following setup?:
Case: fractal terra (black)
Motherboard: ASRock B650i lightning WiFi
CPU: Ryzen 7800x3D
CPU Cooler: ID-Cooling IS-55
GPU: ASUS ProArt 4080 Super
RAM: 2x16gb DDR5 Vengeance 6000Mhz
SSD: Samsung 990 Pro 2tb
Power: Corsair SF750
Fan: Noctua NF-A12x15 PWM
Fan grill 120mm
Cables: Corsair premium 600W 12+4 pin
Your velka 3 video is really impressive and make me want me to build one myself. Also, you may want to try lzmod a24-v5 for the 4060 lp.
i wonder is it also possible to mount the AIO on the T1 on the top cause having it mounted on the bottom will kill the aio slowly overtime or like swap the bottom plate and top plate around to the aio gets to the top?
Great video! Appreciate your no nonsense presentation and remarks. Underrated channel.
What do you think of the fractal torrent nano? It's an itx case but more of a larger form factor.
Keep up the mini-itx cases, my favorite content and the reason i subbed
Hey, brother. What do you recommend for a workstation for engineering tasks (aersopace) and light gaming but I would also like power efficiency?
I am a fan of the ASUS Prime AP201 Not really a mini ITX case but smaller than a lot of cases that can fit a 360 and 240 rad
I eyed it, but ended up with Jonsbo D30 in the end.
I've been looking into SFF builds lately, but it seems like dust filters are just not a thing on the vast majority of ITX/mATX cases.
As someone who doesnt use headphones and is irritated by fan noise, are these loud or can they be quiet? My current computer is a bit older now and needs replacing, and I'm so irritated by the hissing sound the fans make when I do almost anything..
Which ITX case is most quiet that can fit large fans?
Nothing is beating FormD T1
Mechanically i agree,tough shipping, tax and import in EU is same as case is priced, which steers people off it
I'm really struggling to choose between the T1 and the terra. I love how compact and clean the T1 is, but the Terra's walnut piece looks so good, I js don't know how to choose loll
also I've seen a lot a good things about the Dan A4-H2O, so now I really don't know what to choose. Can y'all pls help me decidee 🙏
1 month late I’m sure you already found your answer but I would eliminate fractal from your list, for the size and amount of cooling it provides, not only is it just as big as any other cases, it doesn’t support water cooling like the t1, Dan a4 h20, iqunix. I would recommend the h20 due to how safe the choice is in price/availability, cooling, size, and quality. The only annoying issue I have with h20 is the material lian li uses, just never been a fan of the material they used for their cases.
Can I use a atx regular power supply?
Watching your videos makes me want to rebuild my whole setup to some super clean ITX box.
You deserve more subs for the quality of your content!
Can you fit strix 4090 on those case?
when you said you wonder about the terra having a front similar to the north and I immediately thought if the terra was 17mm longer and if the front panel was slotted like the side panels but completely walnut, making room for a 120mm/140mm slim fan.
I wish there was a case similar to the H1 v2 but with a large fan at the top similar to the series x. Mine is loud and runs pretty hot with the lack of airflow.
Can you fit micro atx case in these ?
No lian li a4 h20?
any suggestion for itx case that can fit 330mm gpu?
Devyn which graphic card did you use for this video ? NVIDIA 4080 or 4090
Thanks in advance
I love your work, it would be nice to see your personal setup !
Any news on the NR200P V2? It was supposed to hit the market in February, but when I directly asked Cooler Master they did not even have the official specs yet. I'd like confirmation that it will actually fit my TUF 7900 XT 🙂 as PCWorld claimed in their CES video. Would be great to see this on this channel.
I recently built in a Cyberwood M1 Mini-ITX case and rather like it, but it's probably not worth covering since it doesn't stand out from other sandwich style cases (besides being made out of plywood).
hey devyn, you should check out the JIMU D+, it was originally a formd t1 clone but its very much its own case. the formd t1 actually took some features from it. id love to see you do a comparison of the two.
I really want to build a fractal terra build but I move a lot due to my parent job and because of that I am afraid that I break something while I am voyaging with them should I still get an itx pc or should I just get a powerful laptop?
Does a Gigabyte RTX 4090 Gaming OC fit in an NR200P Max? GPU specs is 340 mm and clearance on the NR is 336mm but has anyone managed to squeeze on in and done so safely?
What are the best flat itx or m-ATX cases that can fit full size GPUs (briefcase style) ?
Nice video, thank you. I'm looking to build my wife a sffpc basically for work (MS office, Internet, nothing gaming) and am looking at a MB (Asus z790) and CPU (14900k) with 64 or 96gb ram and want it to handle 2 4k monitor w/out a GPU. All air-cooled with the Noctua NH-L12S (or larger if able to). Building this all inside the Fractal Design Ridge case. However your video has given me some nicer options as I'd like to display the PC but wife only wants it on the floor. What do you think of this (pro/con) and what case (absolute favorite that she would want to display it), CPU and MB would you recommend? Thank you.
I searching for itx/matx case which can handle 240AIO, I going for integrated GP build, any rec?
Checkout Ncased M2. You can fit up to 3-280 Rads in a 15.6L volume. Also Lian Li A4- H20 (Dan).
Hi man, amazing info, thank you! Thinking about mini render station fo 3dsmax + corona render based on amd 7950x and looking for a small case like lian li dan h20, Meshroom S V2 or other similar. I'm not sure it will be cooled enough, cause i need 24/7 rendering at 4.8-5 MHz all cores and max AIO for those cases is 240mm radiator, means 2x120mm fans. How do you think is it possible to make such a tiny render station?
is the pump on that aio on the rad
My favourite is the KXRORS (known as Shiny Snake in Asia) S300, 400 and 500. Also I believe your channel has never featured the ITX cases from AKKLA or Mechanical Master?
Loved it!
I have the Meshlicious and Dan A4 SFF. Both incredible!
Which ITX case has the most room for future upgradability e.g. 5090?
So far none. We don't know how big or small next gen cards will be. They could stay same size, but also can increase in size
Hi. I am trying to build my first PC and I happen to have 12900E CPU, 2x16gb DDR5 SODIMM and 1TB NVMe. Do have any recommendations for MB and GPU? I mainly play Ark. Thanks!
I think the ridge is a pretty good option for those with limited desk space.
i built a ridge pc, trust me its not worth it, had to limit cpu and still faced lot of heating issues
I need a itx case that takes an off psu and no gpu does one exist outside the inwin one?
no LianLi A4-H2O ?
Probably the one I'm interested is the Ncase m1evo, very few videos I've seen here on RUclips
Dan A4-H20 is definitely my favourite ITX case so far
Fantastic case at a reasonable price
@@shoobadoo123 definitely. The volume is still very small and looks super clean too imo
Your S300 build inspired me to go smaller than the Meshilcious and NR200. I love that case and sad to see it was missing on this list.
Been out of the SFF scene for a few years now. This was a nice video to catch back up
Thank you for the rundown. Really enjoying the videos on this channel.
I hope you could try out more ITX cases from China as there are a ton of options there (metalfish, aklla, jonsbo etc.) I specifically found interest in the Metalfish T40, hoping you could check that one out too 😊 cheers!
Would love to see you to try out the new 500W GaN powersupply from HDPlex in the Velka 3!
The FormD T1 would be PERFECT if it came with a colour-matched side panel!
Are there cases that are small like an Itx but support matx
You gotta check out some of Sliger’s cases. I’m currently using a Sliger s620….the Formd T1 is still on my “to buy” list
opinions on Ncase FormD T1 v2.5
Not exactly a case but i liked the Xtia itx build you did and found the video very useful.
The vid is 5months old now so super excited for an update next month! You should do a top itx cases in the current market. Have some categories like best budget, mid range, high end, portable, vertical, most compatible etc categories.
Just resenly built nr300p max. Big thanks for recommendation. Спасибо
You have made a mistake putting the rad at the bottom of the case @5:09
I always wonder why the Thorzone cases don’t make these shortlists. The materials feel significantly more premium than most of these other brands. More expensive but you get what you pay for.
Nice.....can you update the indexes for video seeking ?
Any thoughts on the NanoQ?
Would be cool to see an Air Cooled mid range build in the Asus Prime AP201. Its such a nice looking case while being fairly affordable and it being M-ATX makes it more cost effective in terms of parts.
But it looks big for a m-Atx case. I would consider one of the more compact SAMA IM01 clones (Itek, Nox, etc). Sized and looks similar to NR200, but with m-Atx support. Although there are no recent YT builds on it for AM5, and from what I have read, some motherboards that have bottom IO are not compatible.
@@dexter_hacks The size of the AP201 is actually not that big of a deal to me , I already have an M-ATX (5700x/RX6600)build in a DLM 21 and I was thinking about changing cases so the AP201 looked appealing. Another reason im looking at the AP201 is because its one of the smallest cases I can find in local stores where I live and ive never bought anything off of places like Aliexpress and im worried if the cases comes damaged or something on how to deal with warranty and stuff , buying computer parts off local stores is a lot easier for me.
I am really considering building the Velka 3 since watching your video. The only exception is I want to use an i7-13700
I'm am currently building it with i7-13700 just waiting on all the parts to arrive, I think it should be fine checking the compatibility on NOC site with the cooler he used it says it's fine to use.
@@TinusTK I would like to know how it works out for you. Please.
Should had included the case from Lunchbox Gaming PC video, so compact and i got a 3080 and a i7 11700 running on it. My favorite case, amazing price and sturdy.
I thought the FormD T1 has been out of production. Website says they will be back.
edit: My bad I didn't hear the section on the T1