How to diagnose Dishwasher Draining and Motor Problems | Oven Spares & Parts | 0800 0149 636
HTML-код
- Опубликовано: 22 май 2016
- With more tips from Spares Direct, engineer James goes through how to diagnose any problems with your dishwashers drain or motor.
If you need any of the follow spare parts visit sparesdirect.com/ :
- Dishwasher Spares
- Dishwasher Parts
- Dishwasher Spare Parts
- Dishwasher Draining
- Dishwasher Motors
You can follow us on facebook at / sparesdirect and on Twitter @SparesDirect
Thanks for the video. A glass broke in my dishwasher and stopped the pump from working. This video helped me take out the pump and remove the chunk of glass. Dishwasher fixed.
My wife was just about to buy a new one and I fix it thanks to your video. Thanks a lot.
I just fixed my Bosch dishwasher. Problem was stuck float in Water Level Control Assembly.
This keep the pump constantly running. Hard water/calcium deposits pretty much caked up stopping float.
I went a few steps further and took apart whole assembly and descaled parts and float with CLR cleaner and brushes.
Cleaned Styrofoam float on bottom and all moving parts. (Red push-rod and other parts).
Works as good as new now.
Thanks for video.
SparesDirect, you are the bollocks! Piece of broken glass wedged in the impeller chamber. Fixed within 30 min, wifey impressed and I feel like a man again...sons also relieved after ‘70s washing up experience last night 👍🏻
Really great! Thanks! First I replaced a faulty drain hose. No change. Still water stayed in the washer. Then I disassembled the pump and found the "thing" you take of a can of coca cola inside the pump. Removed it. Assembled it all and... TADAH!!! Works again! :-) Was about to replace it but this video saved me a ton of money! Thanks!
Thank you. Followed your video and found a sliver of broken glass in the pump assembly. Dishwasher operational again. Saved money and time, and the frustration of doing dishes by hand.
Great video. The only proper maintenance one I could find and it’s perfect 💪
Thanks for the guide. I think my issue was a flood cause by a little pipe into the rear of the drain pump housing had come off, probably due to scaling/grim. I blew that out and reconnected. Seems fine now.
You absolutely nailed my problem and saved us several hundred in repairs. Genuine thank you for the accurate information that I used to repair our machine w out cost....
Lies Philip! Im your father and I know you dont own a dishwasher, get off youtube and go back to bed! You little bastard! 😡
Thanks for the advice. Great vid I fixed my dishwasher 😉
Amazing how for any kind of thing,even things you would not imagine,can be found on RUclips and there is always someone to explain.
Good morning.This spared us of buying a new one for now.Took off the drain hose and water pump.In the water pump found a plastic cap that was making the noise when it was draining.Easy 🥺. Thanks.
God, RUclips is the best.
Piece of glass wedged right in the Impeller. Worked like a charm. Thanx for the help.
Come si può sbloccare la lavastoviglie dopo che ho cambiato il cuscinetti del motore dello spruzzo della marcha Ariston
Italia
Was that stopping your arms from spinning?
thank you, thanks to your video i was able to repair my dishwasher ..👍🏿👍🏿
Xmas day fix , little pipe came lose , sorted. Helpful video
Thanks, after watching this I managed to find a small piece of plastic inside the machine causing a leak. Now working perfectly. Thank you.
I had a similar problem, found a single lego stud... 🤦♂️ this video was a great help though.
really nice video mate, mine was a split washer arm on the bottom, but rather than replace and waste I just completed a plastic solder now seems to be working fine without flooding the kitchen
Thanks for that , relevant even today .. Turns out its the exact dishwasher I needed to see.. And yes there was wee wooden sticks in the pump blade .. Now its working again 👍
Many thanks, great vid. Helped me to fix my Beko xxxx that was humming, and not starting the cycle. Checked inside, removed clips and pipes, checked drain tube was clear, didn't find anything specific, but it now works!
Because, probably there was water under dishwasher so dishwasher thinks that there are floods. Dishwasher all the time will try to suck out floods. You got leak somewhere
Excellent, thank you..Every day is a school day. 😉👍
You have given a very good hint to see all the pipes, that I was not doing that.
Beat vid I’ve found for a beko
i did all you said, was all clear, but now it's working, anyway thanks
Yep, worked for me. Many thanks!
Thanks...helped a lot 👍
Can you help me with my beko? I strip dowm to 100 pieces clean all what was possible all units work fine but looks like dont use salt at all(even when ive clean whole salt tank) it taking and filling up salt tank with water but not using salt?as leaving white scale all over in dishes
I have to admit the first place to check should be the Filter and then the end of the hose where it goes into the drain pipe. Then do the following before taking it all apart!! It might save you a lot of work and mess....What you dont see in the video is all the crappy dirty greasy water and dirty plates that indicate a blockage normally!! 😄
As I am a Engineer (nothing to do with dishwashers or any other household items) and when mine left a lot of water in the sump area I simply took the end of the drain off after having previously checked the filters discovered that the filters were fine, attached my small 8 bar compressor to the end with a airgun and the hose and carefully back blew high pressure air through the hose until it cleared the blockage in the sump area, once I had a lot of bubbles coming up through the dirty water I knew it was clear enough to drain, allowed a drain cycle to go through ,it worked, then a rinse only cycle, and after that just fine as normal.
Most people wont have a small compressor to hand or are engineers or domestic white goods technicians in which case sponge out the water to reasonably dry from the sump ( yes its disgusting and greasy) then put in half a pint of vinegar and 5 teaspoons of Bicarb, it will bubble like mad leave for 15mns then put two or3 kettles of very hot water (not boiling) into the sump and hopefully that will clear the blockage, if it does, then run a rinse cycle and if all is well carry on a as normal.... .
If it doesn't clear, then take the bottom off the dishwasher....and follow the video as its useful....
Some useful stuff but the impeller spinning test: it has a magnet which many users will confuse for a faulty part==more sales?
Hi, my friend. today I had a bad day. I failed to fix my client's dishwasher. it's clogged and also leaking. I fix the clog but for the leaking, I thought it was from the inlet valve at the bottom. but when I bought the new piece for$90. it just turns out it's leaking from the side of the dishwasher which is the inlet gasket. there are two squire holes there and almost all the water leaking from there. I am so frustrated even though I check tons of video on youtube. a guy told me that's because there is too much pressure in the dishwasher. but why? I don't think I should seal those two squire hole there since they are designed like that. could you please help me out? please!!!!!! I could send you the video how it's leaking.....
Great video. Could you also do some video on controller unit issues troubleshooting? For example when cycle program can't be changed (... one wants to change washing cycle but fails.. cycle LED is "stuck") or when start but on is kind of stuck, I mean like issues with control panel, buttons... Thanks in advance!
What would cause the washer arms to not spin ?
Greetings! your video is simple and yet very helpful! I have a question, draining pump in my machine is same version and having washing/draining problem, not sure yet. What I noticed is fluid inside of chamber where rotor of draining pump is. Is this normal or there is leakage inside the chamber? It should be dry right?
I could hear liquid inside the drain pump when I took it out and wondered if that was normal. Did you end up replacing yours?
Thank you so much! my Warranty expired a few months ago and the water would not drain. after watching your video i desided to take the challage and fix it myself! and I did! i found 2 peaces of glass in the water pump. once cleand and reinstalled evrything, it works perfectly. Thank you for this vide!
🤩🤩🤩🤩
Great video thanks. Washing machine repaired :)
Please advise, our Bosch ascenta white Occasionally the wash cycle does not start, so I have to listen, and if it doesn't, then quickly turn it off and on, and it will run. Seems to drain ok. The soap dispenser does not open. thank you.
Hi I have just bought a dish washer and is is leaking underneath and the lights are flashing any help
Thanks mate!
Hi I have machine washing plate when it end washing and drying out of pocket in tank water. Must the hose be over system the washing. But put the hose on earth the water don't out be natural.
Thank you
Note: washing plate brand silver line
The exit hose should be higher than the dishwasher? I thought it will drain better if the dishwasher is higher than the drain in the sink I placed a chair under still flooding...so should I put it lower but the drain higher??
Would you show replacement of bottom valve pump which inpellerinit just below main pump its a 3way valve with two connectors top push on wire and two spade connectors at side of pump in cased in plastic. which way round do these go red and purple wires on beko DFN16x20x part number pump 16-24Lt1 any help please mised out some numbers on the part.
اللهم انت ربي لا اله الا انت وحدك لا شريك لك
Dude how can you take the pump of without pressing the pin thing ?
Thnx a lot very helpful
Dishwasher does a rattle noise when draining and then spews water everywhere. Replaced all door gaskets, still leaking from middle area under door. Declared the whole thing fucked on day 2 of quarantine, been hand washing for the past almost 2 months. HELP!!!
Star Tigarsi moliobih te da nam pokazes oi ostale kvarove na mas. Za sudje npr.zamjena grijaca motora opis rada elementa za nivo vode itd HVALA PUNO.
How to get salt container totally empty of water before putting my dishwasher on the back? Or I can put it on the back and water will not come out?
Hi ! I have LG dishwasher. I’ve replaced the bearings for the circulation water pump & fixed it back, but when i operate the machine the arms not rotating, although the water level is good & there is water getting out from both arms but not rotating . So Could you please help me how to fix it? by theway i found that the VARIO MOTOR coil is damaged.
Mine is doing exactly the same
the light of the Dishwasher for increasing the amount of salt does not turn off knowing that the salt tank is full
What are the possibilities for that
Good
Thanks
Opened up my broken machine. Bit of plastic in the pump. Removed and now working.
That looks like a Beko *DWD5411S* :)
اللهم صل وسلم على سيدنا محمد هل من مصل على النبي
My pump had a piece of plastic inside. Removed and solved the problem of no draining water!!
How is one supposed to really put the dishwasher on it's side like this full of water?
You can try lowering the hose down to the ground after that remove the remaining water with a sponge
My mashine is full of water inside any advice
Maybe change the float
great video if you want your finger ripped open with broken glass allways advise of dangers at beginning of video tom 50 years service eng