How to Replace a Dishwasher Wash Motor on a Hotpoint Dishwasher
HTML-код
- Опубликовано: 7 июн 2024
- For all your dishwasher wash motor spares go to:
www.espares.co.uk/search/pt15...
If your dishwasher is not spraying water onto the load, it is squealing when washing or even leaking the problem, it is likely to be that the wash pump motor has developed a fault and needs replacing.
Want to skip straight to the information you need? Here's what we talk about in each part of our video:
0:00 Introducing the video
0:27 How to remove the base plate
2:53 How to disconnect the drain pump
3:25 How to remove the old wash motor
5:26 How to fit the new wash motor
8:16 Reconnecting the drain pump
8:38 Reattaching the base plate
9:00 Putting the dishwasher back together
9:56 Suggested video: How To Fix A Smelly Dishwasher
Thanks for watching! - Хобби
You saved me, thanks a lot dude
Hi Luciano, thank you for the nice comment and glad we could help.
Fantastic video, cheers mate 👍
Hi Mark, thanks for your comment. It's great to hear that you appreciate our video, and nice to know that it has helped you to keep your dishwasher up and running.
Hello, I do not know your language. My machine is L60t3c. Something like jamming occurs in the engine during washing. The fountains stop. Sometimes it saves itself from this jam. The engine of my machine is the same model. When I open and close the door of the machine, the washing starts. Then it makes a sound like 'yyyy' sound again. But I can see the rotor turning through its propeller, but the sprinklers stop. The engine gets very hot. The interesting thing is that when I supply 220 V from outside, it continues fine without any interruption or jamming. But when I connect its own card, the jamming continues. I checked the motor fan. There is no foreign object. Is this caused by the turbine of the engine? There is no problem with mofsets and zeners. I tested the card. Could you please reply regarding this turbine? Is the problem with the engine? Is it the engine turbine?
I know you can test a heating element with a multi meter, but have been told you cannot test a bosch heat pump to see if its faulty, is this true. Many thanks in advance.
Hi Dambuster Motorcycle Tours, you can test it with a multimeter at the terminals and you should get a resistance reading, also test the heater relay on the board as there have been issues with bad solder joints.
@@eSpares Thanks for the reply, very useful
Looking for help i have a bush dishwasher and the bottom washer sprayer gets stuck you have to take it out and put it back to get it to spin
Hi kinightsbliss, what is the spray arm getting stuck on when you turn it? it sounds like it is not connecting to the sump connection so look for something that has broken there that may be causing the issue.
@@eSpares nothing its connection to bottom but after a wash it dosent move freely,and where it pushes into looks like it wearing the plastic away
Hi Kinightsbliss, if it is wearing the plastic it may be causing it to stick and should be replaced.
@@eSpares its done it since i brough the dishwasher