KORE 3 BIG BRAKE UPGRADE!!!!! (LS SWAPPED GBODY)
HTML-код
- Опубликовано: 5 мар 2023
- How to install C5 brakes on Gbody with Belltech 2 inch drop spindles.
YES N90s WILL CLEAR THE CALIPERS!
GM S10 BLAZER, 1998-2005, Ø325mm C5/C6
www.kore3.com/proddetail.php?p...
Year One Cast Aluminum N90 Wheel Kit (4) 17" x 8" with 4-1/4" Backspacing
www.jegs.com/i/Year-One/219/S...
Belltech 2" Drop Spindles 1998-2003 S-10 Chevy Blazer/GMC Jimmy
www.jegs.com/i/Belltech/146/2...
QA1Rear Coilovers
• HOW TO INSTALL QA1 REA...
Irish Marcelle Productions
Equipment used for production
iPhone 13 Pro Max
Rode Videomicro(shotgun mic)
Movo Edge RXD (wireless mic)
iPad Pro 11inch
Lumafusion
Beats by: Crank Lucas 
Авто/Мото
Came out dope bruh🙌🏾
Yo those wheels look sick 😎💯🔥🔥🔥
Cool! Thanks for sharing!!
Very informative video, I already did mine but still ended up watching the whole video. They look good.
I appreciate that!. I’m finally making some progress. I’m ready to pull her out the garage
@@PENNYLS1 anytime, can't wait to see it painted.
Good info! Keep it up!
Nice work👍🏿
I got an 86 Pontiac areocoupe. It’s not all stock anymore. It was just a pig. It had no get up and go. I made the decision that I’m not gonna sell it, so I’m making it into what I want. All the suspension had been rebuilt with tubular control arms, and I’m running 2” drop spindles. I wanna go to the Blazer spindle, so I can have better brakes up front. I’ll look into the Belltech spindles. I’ll probably try the stock S-10 calipers first, and see if they’re any better. I’m running 15” race car wheels, and worried about clearance. I plan to run bigger wheels in the future, but I just want to improve my braking for now. Thanks for sharing your advice!
I was gonna ask but I think I just looked an answered my own question? 😂 but I was thinking of using the rotor kit that @87SSBOI is using.. I was gone ask can blazer calipers be used for that set up.. or just go with corvette calipers for that application. 🤷🏽♂️
Is it only the 2wd blazer that can be used? What about the S-10 pick up truck if 2nd
The area you had to grind flat are strengthening ribs they're not for aesthetics but you're not going to affect the integrity of it by taking off the little amount of material you did
You're also the only person that I've seen used the right tool to do the grinding the die grinder and a carbide burr it's definitely the best way to do it. I have a set of extra long carbide bars They weren't cheap but then they cut
Beautiful work what size rim are they thank you so much.
17x8
I can't help but notice the caliper mounting bracket looked as if it mounted without grinding.
Correct. Only needed to grind in order to mount the Kore 3 bracket.
Can you use the same master cylinder when change to big brakes
Yes the stock master will work. Most of us just upgrade the master and prop valve because plan on running disc brakes in the rear also.
Hello, what year corvette did you use and did you also covert the rear from brums to disc aswell?
97-04 Corvette. No I still have drums on the rear as of now. Plans to swap S10 Blazer rear discs brakes soon
PennyLS1 are those factory rims you have on there?
17”
What vehicle did u get the dropped spindles. Off of? S10?
Belltech S10 2inch drop spindles.
Did you have to do anything to the proportion valve
No I didn’t. The stock one will work. I am changing it once I convert the rear drums to disc brakes
what upper control arms do you have
BMR
What happen to the brand new doors your where order from summit
They kept pushing the delivery date out. I canceled my order. When I got the used door, the guy said he had both but when I got there he only had the passenger door smh.
@PENNYLS1 Damn i feel your pain i was about to order the door's from summit for my 86 mc too that's why i asked
What upper and lower control arms?
Lowers are stock. Uppers are BMR
www.jegs.com/i/BMR-Suspension/142/AA012R/10002/-1
will it work on a c10 truck 1971
Not with these spindles. But Kore 3 had a bracket to adapt the corvette brakes to the C10.
What size brake lines are those.
The red ones are 4an and the silver are 6an
Let me get them blazer brakes
What all do you want? Calipers, rotors, spindles, pads?
Hey where did u get the banjo bolts at?
finishing-lines.com/collections/hardware
@@PENNYLS1 thank u I am finishing my kore3 front c5 setup now. The rear has a kore3 dual c5 caliper setup goin on my quick performance 9in. Man I am getting excited now
@@redneckswitwheels that’s gonna be bad ass 💪🏾
@@PENNYLS1 putting me deep in debt lol
@@redneckswitwheels trust me I Know lol