Black, Orange & Silver Epoxy Countertop Using Dirty Pour Technique (Pour From Buckets) Full Tutorial
HTML-код
- Опубликовано: 3 июн 2024
- For this video, we will show you how to install a Leggari stone kit from start to finish. This is a clinic office and we gave their countertops that real stone look over their custom-built wood countertops. They saved hundreds of dollars by doing this over their countertops.
This technique is extremely DIY friendly and you’ll see it all right here!
You can purchase this kit directly from our website.
leggari.com/?...
This Leggari Stone Kit comes with a lifetime warranty for delamination, chipping, cracking, or wearing off.
This Leggari Stone Kit uses these metallics: Midnight Pearl, Adamantium & Creamsicle
Some of the things you'll see in this video are
- How to mix and apply the WB Primer
- How to tape off edges for dirty pour technique
- How to mix epoxy for the Leggari Stone Ki
- How to apply the Leggari Stone Ki
When to Pull Tape For Edges
How to Mix Wb Urethane Matte Top Coat
How To Apply WB Urethane Gloss Top Coat
- Final Look
Our kits can go over existing surfaces like laminate, granite, wood, tile & more!
Learn more about the process! 👇👇
THE SUBSTRATE
Prepping the surface of the countertops is easy. Most surfaces just need to be sanded (80-100 Grit) then wiped clean. Granite and Marble will need the sealer removed. Tile will need the grout lines filled with Bondo and sanded smooth before applying our Countertop Kits.
How To Plastic Off A Kitchen Prior To Install: • How To Plastic Off You...
How To Prep Countertops: • How To Prep Countertop...
EPOXY PRIMER COAT
Priming the Countertops is simple and fast. Mix your pre-measured primer then dip and roll the pigmented primer across the surface until the countertop surface is completely covered. Wait 1 hr. (or until tacky and not coming off to the touch) and start applying the Base Coat.
METALLIC EPOXY COAT
There are so many different applications for our metallic epoxy coat. In this video, we show you the dirty pour technique. When you place your order you'll receive step by step tutorial videos that will show you how to apply this part depending on the look you're going for!
HIGH WEAR TOP COAT
We offer 2 different Performance Engineered Top Coats. Glaze Coat is our High Build Top Coat that lays out like glass and adds depth to the Countertop. The Urethane Top Coat comes with the option to have a High Gloss or Matte finish. It needs to be rolled out super thin and leaves a minor texture on the countertop. You apply it within 24 hrs. of installing your Countertop Kit
How To Apply WB Urethane Top Coat: • Learn How To Mix & App...
Leggari Countertop Kits were designed to transform your countertop, tabletop, or desktop into something new and beautiful by coating your existing countertop or pre-built wood countertop. They can be installed in 3 to 5 hrs. including the prep work, and will last for decades. If you can paint your countertops, you’re more than qualified to install a Leggari Countertop Kit. Our Countertop system is leading the resin industry for thickness, durability, and scratch resistance with our High Wear Top Coats.
Our Countertop Epoxy is specifically designed for counters and can be applied to any hard surface. It’s 100% Pure Solids using the finest raw materials that include proprietary additives for working time, thickness, flow, and marbleization that are vital when achieving our Dynamic Effects. Our Countertop Epoxy is also a decorative, durable, and chemically resistant coating, available with a High Gloss or Matte finish.
About Us:
Leggari is a coating based channel (metallic epoxy & concrete overlay) that will show you how you can use our products as amazing DIY projects to transform your existing surfaces! You can renovate things like kitchens, bathrooms, basements, patios & more! With Leggari you can renovate in no time, imitating real stone or creating a designer concrete look!
You can watch hundreds of videos that show you the step by step process of resurfacing your existing surfaces!
- Tim Krumland and Tylor Svangren, Leggari Founders
#leggari #leggaristone #leggariproducts
FIND US ON SOCIAL MEDIA
Our Social Media is filled with projects done by customers around the world and we also give sneak peeks of projects we're working on, stay up to date and follow us!
Instagram: / leggari
Facebook: / leggari
Pinterest: / leggari
Twitter: / leggari
SIMPLIFYING THE INDUSTRY: leggari.com/?... - Хобби
Y’all make this look easy!! I’m getting a house in two weeks, think about doing this over tile counters!!
Very nice indeed. Would you guys record a video about the difference of final mate and glassy coat resistance on any kind of scratch, heat and other crash?!
I've been watching videos from stone coat and legarri for a couple of years now. Recently I started doing epoxy, getting out of the concrete trades. I never saw the difference in the materials until recently. The legarri epoxy looks so awesome and clean going on compared to the stone coat 👌
a brilliant job guys.very well done, and thanks for sharing this, cheers NZ
Hermoso trabajo, me gusta mas el brillo que da apariencia de vidrio, los felicito
You guys do great work. This product is awesome
Another awesome looking project. Very nice guys
We really love this My Husband and I have watched so many videos was wondering we’re getting ready to remodel our kitchen should we do the countertops prior to installation. Or should we install them and then apply product
Awesome as usual, man I bet you guys go through a lot of bucket's!
Love it! Love the colors!
Can your products be used on aircrete? The foam in the Portland, even after cured, is what makes many questions for me, wanting to learn.
Did you mate the finish for a office supper wear and tear vs gloss ?
Awesome...matte finish really takes away from the smaller detail. After all we’re remodeling to draw the attention gloss it up
Such beautiful work.
watching your video, I keep asking myself; how long does it take for this resin to reach the gel state? if the time it takes in one piece was not enough, you still do it in two more. congratulations 👏
You are a great instructor and a pleasure to listen to. Very understandable snd gives me courage to try things myself.
Wonderful! Thank you for the comment!
I appreciate the step by step tutorial 😮🎉
Hi ...I live in Brazil. Fantastic your Post
If I were to use a knife to cut directly on the countertop would it damage/erode the surface/finish?
Awesome job. Me personally would have had a little more colourful, but it's still beautiful.
It's an office space!
For your space u would do it how ever colorful u wanted. That's whats shown in diff vids and website... understated (like a works space) or full wild'n out rad.
i love you videos....... if i wanted to do a chester drawer thats made of wood with dimensions Length 4ft, width 6ft height 2ft which kit do you recommend???
I like the wall design behind you. how is that done
on the top as always
Any coatings that give a slight texture to surface?
I have primed my counter and applied the WB primer. I want to do a dirty pour, but I want the base to be white- (my counter is primed white) what do I mix into my metallic epoxy to make my white base? How much pigment to epoxy? My project is approximately 20#. I have the metallic epoxy for 20-50#. What quantity of epoxy should I mix up to cover the 20# and then I would use the rest to mix my colors. Thank-you
Them orange latex gloves are the best out there
Do you have to spray the edges with denatured alcohol as well?
if you pour the part B first, you don't need the secondary bucket as no part A will EVER be stuck on the bottom to create a soft spot;) but that means you mix faster...
Buenas tardes sus vídeos productos son sumamente buenos
Les pido por favor si pueden transmitir en Español o pueden subtítulos en español
Amazing
Hi all, amazing products and results. Before I start anything on my kitchen worktops (countertops) do any or every work surface need sanding first before you apply the primer? Or do you just clean the surface thrn apply primer and epoxy. Thsnk u and big love from the UK.
Thanks for the question, yes we fully commend that every work surface requires sanding AFTER you buy the primer and NOT BEFORE, at which point you should clean your surfaces ready for the primer and epoxy. Hey, Adam thanks for stopping by!!
Hello from australia 🇦🇺 can you put your product on a wooden benchtops
Wooow... Amazing...!!!
So you use isopropyl alcohol if you want fractured/granite look and denatured to keep the look? Both remove air bubbles? No torching.
Why is this project different from the others? With the added paint stirs and weatherproofing?
Just wondering why do you guys put tape on the edges? I have been watching you guys on and off and notice this now on yr videos....thx
What do you do a,bout air bubbles
Una pregunta, saben si se rayan fácilmente, resisten algo caliente ?? Saludos desde puerto Vallarta México!!
Jorge...en mis vagos conocimientos sobre resina epoxica te puedo decir que sí es posible que se ralle pero permite dar reparación con papel abrasivo de diferentes calibres y luego brillar con crema para autos y en cuanto al calor lo que sugieren es que no se expongan recipientes muy calientes ya que podría sufrir averías
👍🏻 How black paint was first applied to the floor ?
It came out so pretty. Can you reuse the buckets or do you need to always get new ones?
Very nice, where can I get these products?
I was waiting to see how you removed the blue tape from the back wall, didn't it get embedded in the epoxy?
No, they tape higher than the epoxy flows. If the epoxy is higher than the tape in places you use a razor blade to cut the epoxy.
Fricken excellent!!
How much do it cost to get a kit to do my counters and how to order
WHAT IS THE SPRAY YOU USE TO TAKE OUT THE BUBBLES?
Embrace the mess! I love it, love the colors.
Peace in abundance
How do you do the back splash?
Can you apply this product on granite, quartz, plywood and wood material. And also can you use this product on floors, like basement, garage, and the whole house floors with cement floors.
lillystubbs24 I’m sure if you went on their site you would get your answer.
Very nice I loved it 😀
what you use in the spray
What kind of liquid is it to spray on after finishing? Thank you!
Omg he says it a million times.
The
Isopropyl alcohol 90%, that's what he sprayed.
Or maybe you mean the last rolling which is the matte finish.
@@pinkyhotmessx69 2
Bom dia os vídeos são muito bom só gostaria que fosse em português pra entender melhor
traduziremportuguesbrasil
This is so cool. My husband wanted to get into concrete counter tops, but I want to do this.
Hola la verdad los felicito x sus trabajos .unos genios ....como me gustaria q lo traigan a ese material q es como un barniz . Q es para q n se raye la resina ... soy de argentina
Do you hace that spray líquid yo do that efect.?
Hi top epoxy leggari
What is the spray you spray? can you please answer?
can these products be shipped to nigeria
wow 👍
You guys need to do a Two rollers system of wet hole then go over it with a dry road to get rid of lap lines
I'm watching a good video.
How many ounces should I pour per square foot?
And I'm curious about the ratio of mica toning. thank you
Hello! The amount of Epoxy you should use per a square foot depends on the type of installation you are doing. To view pricing and coverage rates, you can select a kit or build one here and input the square footage of your project 👉 leggari.com/order-countertops/
Little tip if you don't have adblock? Simply scroll to the very end of the video then hit the X in the right hand corner then hit the replay icon and hey presto no more adds, your welcome 😃
Hi. How many ounces are needed per square foot if it is a dirty pour?
metallic powder, what is the amount that I fill in per gallon, please, if possible, necessary
BELLEZA
Do you guys re-use your buckets on other projects?
They did kind of go heavy on the use of many-o buckets!
I was hoping that orange popped bit more. But great job.
Can you deliver your product to Ireland???
700$ for delivery of 1500for materials
I like this process, but I have never seen a 90 degree turn in natural stone, just gentle curves. Am I wrong?
how much 1 gallon oh part a and part b?
Grazie mille. Al minuto 49 cominciate a spruzzare. Cosa è? E perché? C'è qualcuno che mi può dire? Grazie mille
What type of board is used to do the countertop
Stevin Ramkissoon MDF
How on earth did you manage to keep the epoxy wet for so long???
Можно хоть одно видео. С переводом на русский язык , какие материалы идут для росписи столешницы
Всё не по нашему, но интересно!
Yah epoxy ke kam ke bare mujhe bhi kuchh sikhaiye
Its dull were is the shine
If I want start to this business,how you can help me?
I want learn this business, how can I will contact you? I am interested this business
Complimenti ottimo effetto ... mi piacerebbe avere sottotitoli in italiano
Why the thumbs down? They should require a reason or comment for the thumbs down. Too complicated? Too much work? There is a better or easier way?
Y like
WE Love What T he LEGGARI is COOOOOOOOOO+K, wE wOULD lOVE 2 have it back home.
احلى عمل
المعطف الاخير الابيض الشفاف لماذا تدهنه
Why not use a foam roller?
Black and gold again.
How much it cost
Check out our pricing here!
leggari.com/store/#epoxy-products
It looks like a desk area for office
That’s a lot of counterspace for a bathroom, what are they the rich and famous?
Mate
This doesn't really look like marble or granite. The urethane makes it look like laminate
Nooooooo ;( glass look gone
I'm a bling bling guy, so gloss for me.
Muto
Ponito
Kotei
So this is how customer service works at Leggari. Bought 3 gallons of Metallic clear epoxy and 3 bags of metallics. Mixed the 2 gallons of part "A" with 1 gallon part"B" .Poured in 6 equal parts 2 1/2 quart mixing buckets and added the metallics. Literally under half an hour we started to pour onto counter tops and the buckets were to hot to hold. Basically the epoxy cured that fast. What did get poured onto counter tops had to be chiseled off. Watch their videos they take moe time then half hour plus the time for the product to start to cure and then flow over counter edge. We had no time,DONE. Customer service is saying more time went by you must not of realized it? You should of bought the "Counter Kit" then you would of had access to the instructional video? My response what are the videos on RUclips, response Public relations. We can give you a 25% discount to help you out on your reorder????? Are you SERIOUS?
The repetitive music (?) is too much. No music would be better than that! Otherwise, very informative. Thank you.
"FANTATIC" "JOB!! "QUEASTION" u used a white primer, "RIGHT! ? "how do u know what "color of primer to use, to start off "PLEASE" I have "NO! "IDEAL" ("help) I "want to do a "GOOD job, just like u "did!!, "(BUT") I "don't have "any "ideal" the "color" of the "PRIMER!! to "use?? (I "love) all your "work.! I "don't "think, I could "come "any where, close, to what u "DID!!! "BUT" I want to. "also , what kind of "liquid? did u spray durning the work & after u finish, 1 "what kind of "liquid did u spray after u "finish?? "just "LOVE" your "WORK! U know u "SHOULD" be on "t v. !! "haaa" just a little "joke" there. "HAAA". "CAN'T "wait! for your "NEXT "video !!. "AGAIN" thank-u for all your "WORK!
Not a big fan of orange or the Matt finish...for me it defeats the purpose of using acrylic
Wondering if you really throw away all these "brand new buckets" on each video/installation. Maybe you can come up with ideas on how to reuse them and keep as many as possible w/o generating so much garbage. Lots lots of people watch your videos so you do make an impact. Other than that great video.
99.9% of the comments from Pineapple - roflmao
The orange peel on the finished counter top is overbearing. If you stop and look at a still frame of the finished counter the orange peel in the top coat is very noticeable . I do not know why anyone would like that finish. I have watched many of your videos and I only see the bumpy orange finish on the matte clear. There must be a way for the chemist formulating your product to help with the orange peel.
Stone coat Countertops is better .... 🤷🏾♂️. Sue me