@@tonymaciel7687He was making fun of one of the anti-gun people who wanted to ban "fully semi-automatic assault weapons" or something stupid like that.
ik but my question was why does it have what looks like a 1.57 mount on a riser instead of just getting a taller mount scalerworks has a 1.93@@imsmokingdart
They already did by banning bumpstocks. Me personally i just use an AK that’s totally registered by the government and not at all bought off of some dude a couple of years ago. And it totally has semi-auto only, and i never dissembled it and replaced the disconnecter to allow for full auto again. Or anything like that. So i have no need for bumpstock either way.
@@ARandomUser6969 if I didn’t suggest that someone else does something then how’s that make me a fed? I just talked about what i hypothetically may have done. Thats all. If you want the dommy mommy government to step on your neck then thats you. But me personally i don’t fw that disrespect.
Right? I’ve seen that maybe one other time. It trips me out because it’s like an M-16 front iron sight post but in the rear of the gun…well I guess that’s actually what it is but you know what I mean.
The irons aren't even usable it looks like. At least scalarworks mounts are so good you can qd them on and off and it wont shift the zero. Did it a couple of times with a T2 to test and it shockingly was still perfectly zero'd.
Ikr. Once I get my magnifier for my Romeo7, I'm removing my magpul mbus. I'll put those on a 22lr upper or something. Optics are so reliable (plus I have 2 spare batteries) that irons aren't necessary for most of us.
after years of scrolling through RUclips I have finally stumbled across a left handed gun channel so as a fellow lefty I felt it was only right to subscribe ❤ Also I always think your channel name says your smoking cigarettes because here in Canada the main slang for cigarettes is darts lol 😂
I swear I'm being "that guy", but you are aware that he was "bump firing" and ran that in single fire and not full auto, right? Again man, I'm not being a prick or a smartass, just asking. And btw sir, thank you for your service to our country, the best country in the history of the world 🇺🇸🇺🇲🇺🇸
well as shown here clearly, the bump-stock turns a semi auto weapon similar to a full auto mode. yes its a retro fit, and not 100% the same, but its close enough.. i can see why law makers would make the case this is "like" full auto, and full aouto weapons are prohibited by law for civillian posession, to be fair, i think a skilled person can do better without this.@@blakeh3409
Whats are the attachments its gorgeous i love how the riser on the optic lines up perfectly with the irons and how the front iron sight perfectly peaks over the laser ❤👌
I know that every piece that is added to a weapon has a specific function or benefit, but in terms of the aesthetic appearance of the weapon, the fewer additions or wooden and less modern it becomes, the more beautiful it becomes.
To get a more accurate trigger pull reading, pull the scale from the middle with fingers on each side of the rod, pull from the middle of the trigger, linear to the bore of the gun.
I find grabbing at the mag well really helps with bump firing from the shoulder. I'm not sure why it helps, but I can usually dump full mags if I grab from the mag well instead of farther up on the handguard/rail.
How u like that aems? Ive heard theyve had problems after a few thousand rounds like just shutting down and not working. What round coubt is that one on?
Atf gonna ban assault fingers next
Fr
ATF isn't shit, we are a country of patriots. Only the weak comply with their dictation, and they are not patriots.
if we got invaded no wonder who are the cause
I'm tired of seeing this "ATF" cliché, get some originality or creativity ffs!
Nah ATF agents love being finger assaulted
that is the smoothest sounding bolt I've ever heard
That charging handle mustve been lubricated with soap and butter 😂
Gun maintenance and condition say a lot about someone as a gun owner
You guys need to make sure you don't give up your rights. That is one gorgeous looking rifle luv from 🇬🇧
@@christopherprestton8557trust me, we won’t
@@easy_eight2810yeah but that's the parts bro even my colt and Ruger don't run that smooth out the box
Now this is a fully semi automatic assault rifle
😂😂😂😂
That's Rapid Fire.
Not an assault rifle. It’s a battle/protect your family rifle
@@tonymaciel7687 whoosh
@@tonymaciel7687He was making fun of one of the anti-gun people who wanted to ban "fully semi-automatic assault weapons" or something stupid like that.
That bolt was so fuckin smooth 😩😩😩
Posting this one cause the last short was silenced. BFF will be here always!
whats the height on that optic setup jc why you didnt just get 1.93 mount not judging just wondering
What irons are those? I reaaaaally like em. Best of having A2 sights and also free float.
@@xcallsignxfreemanx2804 firearm is owned by @onlyfirearms its a scalar works.
@@spartanswill scalarworks rear sight
ik but my question was why does it have what looks like a 1.57 mount on a riser instead of just getting a taller mount scalerworks has a 1.93@@imsmokingdart
Nobody:
The ATF: "Your fingers.. HAND THEM OVER."
😁
Need to go to the doc for this one fed boys! Are you paying my medical bills?!?!
I don't get it I thought this was america
Atf is gonna make a new rule saying recoil is a machine gun.
They already did by banning bumpstocks. Me personally i just use an AK that’s totally registered by the government and not at all bought off of some dude a couple of years ago. And it totally has semi-auto only, and i never dissembled it and replaced the disconnecter to allow for full auto again. Or anything like that.
So i have no need for bumpstock either way.
@Fck_the_atf you lost that one boating though I thought
@@Fck_the_atftalk about a fedposter lmao
@@ARandomUser6969 if I didn’t suggest that someone else does something then how’s that make me a fed? I just talked about what i hypothetically may have done. Thats all. If you want the dommy mommy government to step on your neck then thats you. But me personally i don’t fw that disrespect.
@@Fck_the_atf no I am just joking along with you, you are funny lol
That action is buttery smooth
Lol that optic and Irons setup is just gravy.
Definitely a weak point and snag point.
Crazy how that butt stock made that gun rapid fire.
😂
😅
"WhEN USeD wITH THe BUffER TUbE THiS ALlOWs ThE ScArY BlACk GuN To Go BaNG ReaLLY QuICKlY"
-some dumb politician
😜
this was just his finger. no bump stock this time since atf dudes banned em.
Best looking MK18 I’ve seen in a while
One of my top 3 firearms, mk18. Mine goes everywhere in my bug out bag
Sick she runs smooth with a limp wrist hold
ATF gonna ask you to turn in or destroy that index 🤣
Trigger reset sound is nostalgic
Elftmann trigger
Phase 5 bolt release looking sick bro
broo the charging handle smooth af like butter! Good job!
oh man, I just can’t get enough of iron sight + red dot setups.
Right? I’ve seen that maybe one other time. It trips me out because it’s like an M-16 front iron sight post but in the rear of the gun…well I guess that’s actually what it is but you know what I mean.
The irons aren't even usable it looks like. At least scalarworks mounts are so good you can qd them on and off and it wont shift the zero. Did it a couple of times with a T2 to test and it shockingly was still perfectly zero'd.
Gentlemen, I present you the new Blind-Sights.
Why? It's annoying it obscures your view it's cringe
@@LoganDoesSumShiet
It's not cringe. Not liking it for practical reasons is one thing. You're being dramatic
That's why politicians call stock a bump stock
Mighty smooth action you got there
First weapon ive seen with a bad lever. 🔥
@instapablo7623why do you think that.
Ambi mag release is everywhere. Maybe if you had a registered lower without one
Great movie, extremely underrated, wish it got more recognition
This motion picture was splendid!
The MK18 is truly timeless.
Such a beautiful set up you got there really
When your ironsights dont co-witness your red dot LMAO. Clean asf build though.
I don’t think it’s meant for that
You’d remove the RDS if it went down. Scalarworks mounts don’t require tools to remove
Might be a 1/3 cowitness
@@sheldonjplanktonn it's a 1.93 mount. The irons are at 1/3 hight
The tactical genius of having a raised optic and a raised iron sight that's perfectly aligned with the solid part of the optic and mount
Ikr. Once I get my magnifier for my Romeo7, I'm removing my magpul mbus. I'll put those on a 22lr upper or something.
Optics are so reliable (plus I have 2 spare batteries) that irons aren't necessary for most of us.
Well she also can't do what Zhe says she can
ever heard of qd bozo
That build is lookin good
NICE TRICK!
after years of scrolling through RUclips I have finally stumbled across a left handed gun channel so as a fellow lefty I felt it was only right to subscribe ❤
Also I always think your channel name says your smoking cigarettes because here in Canada the main slang for cigarettes is darts lol 😂
Thank you 🙏 lefty gang !
Subscribed for the same reason 😂
@@imsmokingdart "Wrong handed gang"
Team lefty forever
how do you have your chamber so smooth? im building my first AR, im not going crazy hut to make it that smooth i may have to
Quality parts
@@c.r.f.4412 dont tell me nothin, my anderson is quality and its 600 bucks lol, i bet that BCG is like 400😂
@@WatchTheseCharacters thats what i was thinkin, but that guns brand nee so lol. im guessinf its just higher grade buffer tube
Bcm bcg is only 200 bucks and it's my favorite
Check out our gun grease! Put a little on your buffer spring and it will feel super smooth!
Really nice build
I like your add ons!
Tell me you don’t need sight without telling me you don’t need sights.
11 years in the US Army and I can count on one hand the number of times I flipped the giggle switch, but you do you man.
the giggle switch lmfao
I swear I'm being "that guy", but you are aware that he was "bump firing" and ran that in single fire and not full auto, right? Again man, I'm not being a prick or a smartass, just asking. And btw sir, thank you for your service to our country, the best country in the history of the world 🇺🇸🇺🇲🇺🇸
Then you can likely count on 2 fingers the times you went outside the wire. POG!
well as shown here clearly, the bump-stock turns a semi auto weapon similar to a full auto mode. yes its a retro fit, and not 100% the same, but its close enough..
i can see why law makers would make the case this is "like" full auto, and full aouto weapons are prohibited by law for civillian posession, to be fair, i think a skilled person can do better without this.@@blakeh3409
Lmfao
That whole set up is clean asf
Bros literally got butter in his charging handle
No bro, he’s got Lard.
*ATF has entered the chat
I gotta know how the hell did you made your bolt So smooth
Clean and lube your buffer tube, and the buffer, then lube your charging handle, and the carrier group
Combination of good and thorough cleaning, you can actually see some lube on the charging handle itself
Bro has a riser on a riser 💀💀
The sound is so soothing 😊
What is that optic and what is it sitting on?
It’s a Holoson AEMS but not sure on the mount.
@@zachgregory1289 That’s beautiful machinery!
@@JHP2001 also found out it’s a scalarworks mount.
It’s sitting on a 10-step mini ladder 🪜 you get in a happy-meal
@@DogBackwards69 that’s a hell of a happy meal toy.
Nice technique👍
He finally used the 30rd mag lol 😂😂
Whats are the attachments its gorgeous i love how the riser on the optic lines up perfectly with the irons and how the front iron sight perfectly peaks over the laser ❤👌
I know that every piece that is added to a weapon has a specific function or benefit, but in terms of the aesthetic appearance of the weapon, the fewer additions or wooden and less modern it becomes, the more beautiful it becomes.
Love the scalar mount n optic
Awesome 👏🏻👏🏻
Such a sick build!
Love smooth charging handles, unlike the MCX spear from what I've seen
This is real ASMR to me!
I dig that rear sight
The optic looks like a gopro haha, good stuff
my armorer got excited listening to you rack that bolt.
Nice looking rig
what a gorgeous setup, props my friend
To get a more accurate trigger pull reading, pull the scale from the middle with fingers on each side of the rod, pull from the middle of the trigger, linear to the bore of the gun.
That's a beautiful gun
I find grabbing at the mag well really helps with bump firing from the shoulder. I'm not sure why it helps, but I can usually dump full mags if I grab from the mag well instead of farther up on the handguard/rail.
Beautiful build
صوت الترباس يجنن
Oh, I wish I had it. I love this weapon
TOP👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
“A 1,000 bullet chamber holding, Completely fully semi automatic, military style lethal assault weapon of war”
What size are the belt keepers?
Love the elftmann trigger!
That Airsoft peq though
How u like that aems? Ive heard theyve had problems after a few thousand rounds like just shutting down and not working. What round coubt is that one on?
The dream weapon of all special forces operator
That’s a sweet looking setup I like that sight
Nice! What’s the rundown of your rifle setup?
Bro has the softest buffer spring I’ve ever seen
What BCG is that? How you get it so smooth lol
Absolute beauty 🤌🏼
Good to someone shooting with the correct hand for a change. 👀👀🤣
i'm now convinced the BK commercial voice has been AI this whole time.
AWSOME
Its beautiful ❤️
That's a badass rifle
It's fo fun, btw what sights are those???😯
So smooth bro 😜
To all my left handed fellows out there, shout out!
Bump firing in this day and age is a wallet flex🤣
Sick gun
Bro got that ghost recon point loadout💀
Nice ...super
Beautiful rifle
Gorgeous sound
Love the AEMs dot
Nice set up
One of my fav guns in Insurgency Sandstorm lol
Plot twist: It was full auto all along 💀🔫
Good for long rage✖️
Good for long fingers✅️
Something about this build makes m want to have one
What sights are you running on this rig?
omg this is perfect.. goodddddd
Murica😎💪🏻🇺🇸
My favourite ❤
Is that a binary trigger??
All the other kids with the pumped up kicks you better...
Sooo smooth