This review should be the template for all youtube reviewers out there. Lots of info and right to the point. Very well done. Thank you for making this review
The reason I did the unboxing was to show how it was delivered. When I ordered this one I didn't know if it would come in a crate or a box or on a pallet. I thought others might want to know also.
@@WilliamFrawley You can't make everyone happy, I enjoy the sound of a 3d printer running, so it didn't bother me at all. Great Review, probably going to purchase one based on this
I have a similar lathe and improved the run out on the chuck by removing the chuck, and putting a dial indicator on the backing plate. I had about 0.002 run out. took a skim pass on the backing plate and now it runs a lot truer. I was really surprised at how much of a difference it made.
I am a novice on lathes but you did an excellent job on this video. Great audio and video with great information. Thank you for posting. I am thinking about buying this lathe or the slightly larger Vevor one with digital readout.
good review! Got one on the way so the info was timely. As a lifetime CNC machinist I've always wanted a lathe n a mill in my garage. This one imma use for replacing tips on pool cues mostly.
Nice job Sir. I received more detailed information from you regarding leathes in this viedo than I did watching 20 others combined. Kutos to you Sir. Direct and to the point. Nice Job!
The vevor branded ones are pretty good, reasonably well finished, they have wipers and oil zerts on the saddle which a lot of them are missing. I got my Chuck running dead true by skimming the back plate and then stoning one jaw. I would recommend for these using free machining steels.
I would have liked to see you use compound feed and cut some threads. But still, a very nice review. I've been waffling around buying this lathe, and your review has provided some much needed information. Thank you again.
Excellent review I found it most helpful and informative thank you for sharing your obvious extensive skill and knowledge with all of us,kind regards,Phil.
I just recently got my Vevor lathe. It arrived all beat up, even the ends of the box were broken. You guessed it: FedEx delivery! Once inside, every piece of sheet metal was bent, some so bad the rivets were sheered. Three hours later I beat the dents out and re-riveted the metal. I spent another 6 hours adjusting each part and the tension of the moving parts. The three-jaw chuck has .008-inch runout. Then, the start stop switch would not keep the lathe running. Buyer beware.
>> *As A Jouneyman + Avionics Machinist w/ 45 years exp.,, This is A Very Good Video and this small lathe seems that it could be Very Handy fo some Modeling and DRAG Slot car parts I am planning on making. >> Many Thanks to This Videographer.
Thanks for the review. I am thinking about getting one of these. I used to have a Smithy Drill Mill Lathe combo, so going into this I am expecting to have to tweak and adjust this on arrival. Maybe even some scraping on the bed. The 7 x14 is available on Ebay for about $400 right now.
An excellent presentation, thanks. 👍 Also, looks like an awesome printed drill press, I'll take a look though your channel for more detail... Damn! Nothing!
I found one online for sale at $75 and could not believe that it was so inexpensive AND good to use. You make it seem like it is totally worth the money, however :) Thanks for your help, and wonderful video!!!
@@Jackofallthetrades bro I was looking for this comment. Just today I saw one for 70, but the company's website said 400. I was so confused. Good to know it isn't a scam
This is my 2nd Chinese lathe which is branded vevor and seems to be better quality, these machines have their inherant problems worst one being the motor is weak stalling out stressing the belt and doing damage, but was surprised to find a spare belt in the parts bag. BTW those belts are almost impossible to find!!! Mine arrived in good time well packed damage free......as with most all these cheap imports need mods so they'll run right........i have the 7x14 digital readout metal gear version and paid $520
I have a mini lath and I am wondering this : Do they purposely build those machines with such defaults ? Building the very same machine with just decent quality would be so easy and cost not a penny more. Is it a hidden goal for such obviously grossly bad parts ?
Just watched this video, very helpfull. I need to adjust the tellstock down to align, I saw how you did back & forth but not up & down, any help would be appreciated, thankyou.
I remember taking 4 yrs of machine shop in HS in the early 70’s. I bet those plastic gears won’t last. When making a video you should turn off your printer or plotter.
Here is the link for the indexable carbide insert tool set: www.amazon.com/gp/product/B0087R9OUA/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 Is this what you are looking for?
I’m happy with it. I think it’s solid and well built. I use it for very small parts. Depending on what you are going to use it for, you might want the larger model.
You can't make them with this lathe after unpacking it. This lathe is weak out of the box. You need to make it better. Upgrade and modify stuff. Search on yt "mini lathe upgrade" etc. You will find lots of info
I just got this lathe but just noticed a lot of bad reviews on the motor burning out. I'm really nervous of that happening to me as I want to do titanium rings on a low rpm of course. How does it do with harder then steel materials
yes, but it does not have a thread dial so you have to stop the lathe, back out the tool, reverse the lathe without disengaging the lead screw and then do the next cut
I own a minilathe for nearly 3 years now. The cost is ridiculously low, so the quality is too... If you want a efficient tool for learning or working...forget it. If you want an opportunity to fiddle with mechanical toy and tweak it is just perfect. You can easily improve it and make it way better. You can afford to fail and destroy it. But be aware : it will takes you time and effort more than the part you'll produce actually justifies!
delivered without chuck key and external jaws and customer service was a pain to deal with, good luck holding less than .0015, no spindle speed read out, BAD you can start the spindle with the feed lever engaged, I should have saved for a better lathe, I am not used to trying to make parts on a toy
I bought one in October last year, sorry but what a useless piece of c#%p, the tail stock centre was 1.5 mm lower than the chuck center, absolutely useless.
ik kocht deze draaibank. Hij werd geleverd met een klauwplaat dfie niet bruikbaar was. de klauwe waren van verschillende nummers. reklameren bij Vevor leverde niets op. ik mocht de hele draabank terugsturen, kostem nEur.175. Dus geen service. advies: koop nooit VEVOR!!Peter C.
Наука
This review should be the template for all youtube reviewers out there. Lots of info and right to the point. Very well done. Thank you for making this review
Minus the unboxing.
Minus the 3D printer in the background.
The reason I did the unboxing was to show how it was delivered. When I ordered this one I didn't know if it would come in a crate or a box or on a pallet. I thought others might want to know also.
I will have to remember not to have the 3D Printer running for future videos
@@WilliamFrawley You can't make everyone happy, I enjoy the sound of a 3d printer running, so it didn't bother me at all. Great Review, probably going to purchase one based on this
Thanks for the video. Nicely done. No stupid music and you provided a lot of the more intricate details that not many reviewers add to their video
No stupid music, just a 3D printer whirring away instead!
I’ve been searching RUclips for info on this lathe and your is the only one that’s helped in my choice to get one of these.
Thanks mate
Please, not another unboxing video. I just want to know if the lathe is any damn good.
I have a similar lathe and improved the run out on the chuck by removing the chuck, and putting a dial indicator on the backing plate. I had about 0.002 run out. took a skim pass on the backing plate and now it runs a lot truer. I was really surprised at how much of a difference it made.
I am a novice on lathes but you did an excellent job on this video. Great audio and video with great information. Thank you for posting. I am thinking about buying this lathe or the slightly larger Vevor one with digital readout.
Easily one of the best instructional videos I've seen. Outstanding work
I was a CNC lathe operator for a minute and they one of those old school manual lathes from back in the day and it looked absolutely prehistoric.
Class video, definitely on the Christmas list now.
I just bought one tonight, great review. I think it will fit my needs. TY!
finally a review worth watching. gratitude my brother. most appreciated.
Mine just arrived today thanks for showing me how to use it!
Great review and coverage!! Thank you!!!
good review! Got one on the way so the info was timely. As a lifetime CNC machinist I've always wanted a lathe n a mill in my garage. This one imma use for replacing tips on pool cues mostly.
Nice job Sir. I received more detailed information from you regarding leathes in this viedo than I did watching 20 others combined. Kutos to you Sir. Direct and to the point. Nice Job!
The vevor branded ones are pretty good, reasonably well finished, they have wipers and oil zerts on the saddle which a lot of them are missing. I got my Chuck running dead true by skimming the back plate and then stoning one jaw. I would recommend for these using free machining steels.
A really nice review and tutorial. Thank you for sharing.
I would have liked to see you use compound feed and cut some threads. But still, a very nice review. I've been waffling around buying this lathe, and your review has provided some much needed information. Thank you again.
Thank You , great video! Lots of information , explained in great detail!
Excellent review! Thanks
Wow, that's a nice little lathe for the hobby user. Handy to know how to adjust the tailstock, the one on my mini lathe is a smidge out of centre.
Very Detailed Review. Thank You.
Excellent review I found it most helpful and informative thank you for sharing your obvious extensive skill and knowledge with all of us,kind regards,Phil.
A great video! I like this lathe
I just recently got my Vevor lathe. It arrived all beat up, even the ends of the box were broken.
You guessed it: FedEx delivery!
Once inside, every piece of sheet metal was bent, some so bad the rivets were sheered.
Three hours later I beat the dents out and re-riveted the metal.
I spent another 6 hours adjusting each part and the tension of the moving parts.
The three-jaw chuck has .008-inch runout.
Then, the start stop switch would not keep the lathe running.
Buyer beware.
Very informative. Thanks for posting
>> *As A Jouneyman + Avionics Machinist w/ 45 years exp.,, This is A Very Good Video and this small lathe seems that it could be Very Handy fo some Modeling and DRAG Slot car parts I am planning on making. >> Many Thanks to This Videographer.
Thank you for the review
Looks like you got a good one!
Really nice video!
This video is more a beginner's tutorial than a review of the machine.
Do you have a list of things you would like to see in a review? I could do a more in depth video.
Thank you so much!! I just bought one.
If you don't mind me asking, what does 9ne of these cost. Thanks.
Thanks for the review. I am thinking about getting one of these. I used to have a Smithy Drill Mill Lathe combo, so going into this I am expecting to have to tweak and adjust this on arrival. Maybe even some scraping on the bed. The 7 x14 is available on Ebay for about $400 right now.
i wonder how the drill press is coming along and good review thank you
An excellent presentation, thanks. 👍
Also, looks like an awesome printed drill press, I'll take a look though your channel for more detail... Damn! Nothing!
I got distracted with other things and haven't had time to work on the drill press. One of these days I will finish it and make a video about it.
Thank you for the information sir
Tail stock is self centering with the chuck when it is tightened down with the piece.
Very helpful video
I found one online for sale at $75 and could not believe that it was so inexpensive AND good to use. You make it seem like it is totally worth the money, however :) Thanks for your help, and wonderful video!!!
You must mean $750.
@@canuckfixit7722 No, it said $75, and the more I looked into similar ads, the more they screamed SCAM. Needless to say, I gave them a hard pass lol
@@Jackofallthetrades bro I was looking for this comment. Just today I saw one for 70, but the company's website said 400. I was so confused. Good to know it isn't a scam
More like 450
Yea 450 on up
Sústruh vevor je pekný na výstavu. Na prácu je to šrot. Mám jeden doma, poslali mi to z Čiech 😂😂😂
What about showing the centring the tool and squaring the tool post to the work piece ?
Watching this video makes me feel like this lathe is worth the $800 or so that it's posted for on Amazon. I think I'll get it
How's the lathe been holding up? Any chance of a long term review vid?
This is my 2nd Chinese lathe which is branded vevor and seems to be better quality, these machines have their inherant problems worst one being the motor is weak stalling out stressing the belt and doing damage, but was surprised to find a spare belt in the parts bag. BTW those belts are almost impossible to find!!! Mine arrived in good time well packed damage free......as with most all these cheap imports need mods so they'll run right........i have the 7x14 digital readout metal gear version and paid $520
how much did you buy ?
Im buying one for aluminum whats the biggest pass you would take?
Sounds well worth the extra cost for metal gears.
I have a mini lath and I am wondering this : Do they purposely build those machines with such defaults ? Building the very same machine with just decent quality would be so easy and cost not a penny more. Is it a hidden goal for such obviously grossly bad parts ?
Just watched this video, very helpfull. I need to adjust the tellstock down to align, I saw how you did back & forth but not up & down, any help would be appreciated, thankyou.
Thank you.
I just purchased this Lathe, could you recommend a tools set
I remember taking 4 yrs of machine shop in HS in the early 70’s. I bet those plastic gears won’t last. When making a video you should turn off your printer or plotter.
I just purchased my first lathe, it's a Vevor 7x14. What size tooling should I purchase for it? I read the manual and there is no mention of it.
I bought one by creworks and it didn't come with a dead centre or the toolbox as described. But it is perfectly serviceable.
Good morning. He Can regroove clutch bell that mini lathe? Thanks..
Thank's! I sure would like to get one of these someday!
I have that exact lathe. Thanks for all the info. I’m wondering how can I adjust the tail stock un and down. Mine is just a bit off.
Did you figure out how to adjust the tail stock up and down? I just got this lathe and mine is off too.
I had to use very thin brass shims to raise it. I loosened the nut underneath it all and testes which shims gave me the height I needed.
Hi Jay, can you send a link to the cutting tools please? Are they 10x10? Thanks and I loved the video!
Here is the link for the indexable carbide insert tool set: www.amazon.com/gp/product/B0087R9OUA/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Is this what you are looking for?
What's the maximum od piece can be clampd up on this lathe?
Great video, thank you so much, I am thinking to get Vevor mini lathe, are you happy with yours?
I’m happy with it. I think it’s solid and well built. I use it for very small parts. Depending on what you are going to use it for, you might want the larger model.
Could you consistently make a copper solid bullet with this? I'm trying not to drop 5k on a cnc lathe...
I think you could if you kept everything adjusted correctly. Maybe use an attachment like this guy: ruclips.net/video/QHsBiJNae1U/видео.html
Where do you get the tools for this I’m looking to make motorcycle wheel spacers with it
Internet
You can't make them with this lathe after unpacking it.
This lathe is weak out of the box.
You need to make it better. Upgrade and modify stuff.
Search on yt "mini lathe upgrade" etc.
You will find lots of info
this video was fantastic. the manual which comes with lathe is worthless
Do they not come with a chuck for the drill bit to sit in?
Mine did not. I bought it separately
What is the origin of this Einhell lathe?
I just got this lathe but just noticed a lot of bad reviews on the motor burning out. I'm really nervous of that happening to me as I want to do titanium rings on a low rpm of course. How does it do with harder then steel materials
You want to do titanium on this toy??? How did it go for you? As far as i know, titanium can be unforgiving. Even in larger lathes
Nice video but I was hoping to see how to rotate the compound rest. I don't see the screws that they refer to in the manual.
You have to back the cross slide almost all the way out to see the screws.
@@WilliamFrawley found them!
Thank you
Does this lathe have a 'through ' chuck so you can put longer items in from headstock end? If yes what is max of? Please
Sorry should say max outer diameter predictive text!
@@mickcoulson6188 I think it is around 5/8" but I will check tonight
I checked, maximum through the chuck is 5/8"
Chuck needs a guard.
Hi it is able to cut threads automatically with this one?
yes, but it does not have a thread dial so you have to stop the lathe, back out the tool, reverse the lathe without disengaging the lead screw and then do the next cut
3d printer running in the back ground???
I see you have a cracked guard also.
yes, it cracked right away. Kind of flimsy. I'm going to replace it with something better.
How can we bie
So this is not a true cnc? Manual lathe with auto feed feature? I'm shopping for a lathe I can use gcode with that won't break my bank.
"Not a true CNC" It's not a CNC in any sense of the word. What even gave you that idea? Because it has power feed?
Correct, just a manual lathe.
Price and how.buy?
eBay $420
Plastic gears? YOU GOT TO BE KIDDING!!!!!!!!!!!
price?
please....
Purchased on eBay for just under $450 including tax, free shipping. It was shipped from a warehouse in Texas
@@WilliamFrawley
Thanks.
I own a minilathe for nearly 3 years now. The cost is ridiculously low, so the quality is too...
If you want a efficient tool for learning or working...forget it. If you want an opportunity to fiddle with mechanical toy and tweak it is just perfect. You can easily improve it and make it way better. You can afford to fail and destroy it. But be aware : it will takes you time and effort more than the part you'll produce actually justifies!
vorrei sapere cosa vogliono dire e cosa vogliono dire le sigle del tornio 7-12 8-14
delivered without chuck key and external jaws and customer service was a pain to deal with, good luck holding less than .0015, no spindle speed read out, BAD you can start the spindle with the feed lever engaged, I should have saved for a better lathe, I am not used to trying to make parts on a toy
i hear a 3d printer
Buyers beware. Vevor sells junk. Read bbb reviews. Terrible company to deal with if you have problems
I bought one in October last year, sorry but what a useless piece of c#%p, the tail stock centre was 1.5 mm lower than the chuck center, absolutely useless.
ik kocht deze draaibank. Hij werd geleverd met een klauwplaat dfie niet bruikbaar was. de klauwe waren van verschillende nummers.
reklameren bij Vevor leverde niets op. ik mocht de hele draabank terugsturen, kostem nEur.175.
Dus geen service. advies: koop nooit VEVOR!!Peter C.
is that plastic gear ?