Hi, I received my YUNZZI YZ75 keyboard today. At first, the keys don't respond when I press them. Is this normal? I'm not sure if it's a problem with the keyboard or if it's due to the distance from the 2.4G wireless receiver, although the distance is not that far either, it's less than 1 meter. I would appreciate your help.
with my keyboard there’s one key that’s a different color, right now it’s three and i can change the number it’s on but can’t figure out how to delete it
hi, I did exactly the same as you did in this video amd everything is fine , except the stabilizers… In stead of hearing the sound it made in your video it just sounds like its stopping in foam😭 is there anything i can do?
watching switch and clicks video apparently the wireless mode has quite a lot of delay. The wired version is the most stable, but a lot of people have had different experiences commonly having issues with the wireless version.
@@vixter3663 You can use it at all times. Whenever a keyboard is called "trimode" it is in reference to connectivity to the OS for use. Trimode is BT, 2.4ghz, and wired connection. For wired connectivity you just switch the mode switch to off and connect with the cable. If you leave it in bluetooth mode and connect with the cable, it will only charge, it won't be connected the OS via the wire.
Hey I just got the yunzii yz75 and I’ve been having this problem where the keyboard won’t turn on even with the usb c cable plugged in do you think it might be defective ?
@@gracebyers4802unfortunately no, I have to use the wireless mode which is FN+4. If you found out how to fix wire mode let me know, I gave up trying to figure it out
maybe you can guide me on this, ive modded the keyboard and it sounds really really great... pretty loud and thocky.... ive only got one issue, well, 2.... my enter and my left shift key sound VERY quiet whilst the rest sounds loud... ive tried recleaning and relubing the stabs like 3x, also tried without lube, still very quiet... and its literally only those 2 keys.... any ideas?
@@RuinerWonglwell that wasnt it, i pretty much found out an hour later the 2 keycaps were just not on perfectly...as in just a slight little teenieweenie little bit
But besides that, the sound is the same for me, just a little more deeper, and more different on the stabilizer
Lmao how are the keycaps budget if they cost more than the barebones keyboard itself 💀
Just buy good quality cheap clones
@@raiji359 yeah
@@raiji359 The clone police will go after you.
@@BlakeAtStake93 is clone keycap is a really bad? I mean they are cheap and better than stock abs keycaps?
@@raiji359 Their are clone police who really hate clones, and will cancel you
Really help full video, really liked it 👍
thank god for this video cause I thought the dongle was missing on my unit lol
I got it and it feels nice
How did you just pull it apart with one hand I can’t even with all strength
I really liked this video 👍
Thanks!
the tape mod alone made my keyboard creamy, thocky, poppy, and a little clacky
my keyboard is locked, does anyone know how to unlock it
So i did everything exactly as you did however after i put everything back together almost none of the keys worked why is this and how can i fix it?
Does it support all kinds of key caps since I want the Japanese ones
Hi, I received my YUNZZI YZ75 keyboard today. At first, the keys don't respond when I press them. Is this normal? I'm not sure if it's a problem with the keyboard or if it's due to the distance from the 2.4G wireless receiver, although the distance is not that far either, it's less than 1 meter. I would appreciate your help.
@@ShadesW3 shouldn't be doing that. Try the other connection methods.
How do i take out the palstic piece? I accidentally installed it before the design piece lol
Imma try to do it but with the lego thingy
with my keyboard there’s one key that’s a different color, right now it’s three and i can change the number it’s on but can’t figure out how to delete it
try pressing fn and 1, 2, 3, 4, or 5, it's the type of ways its connected (1-3 is bluetooth, 4 is 2.4g, 5 is wired)
haha, found the video from ebay! keyboard looks great
Anyone know what other keyboards he would pick in this price range? I want the best sounding stock keyboard under $100
Just get this one with the yellow switches it’s probably the best you can get
What buttons do you press to change the sidelights?
Side light effect: FN+Ctrl
Side light color: FN+Alt
Side light brightness: hold FN+bracket keys, which are [ and ]
When I clicked fn plus 1 my keyboard won’t respond anymore and I have no clue what to do any ideas?
You changed the connection mode, if you press Fn+5 it should connect via USB again
hi, I did exactly the same as you did in this video amd everything is fine , except the stabilizers…
In stead of hearing the sound it made in your video it just sounds like its stopping in foam😭
is there anything i can do?
The stems on the stabilizers will be landing on the PE foam. You need to cut out the PE foam under the stabilizer housings.
what size is the spacebar? is it 6.25u?
Can u pls try HK Gaming Pudding keycaps on them?
Does anyone know if this keyboard can be used on ps5?
i think so it has usb- c cable
Yes it can
did you ever get it set up??
@@vanwhy2630 I did not, it just didn’t seem to recognize it’s connected
I don’t know if you can use it with wireless, because my ps5 burned before u could use it with wireless, but mine work fine with the usb-c cabble
How's the quality of the wireless modes? Any issues with lag or with it not keeping up with your typing?
it doesnt lag i got it yesterday
watching switch and clicks video apparently the wireless mode has quite a lot of delay. The wired version is the most stable, but a lot of people have had different experiences commonly having issues with the wireless version.
Can I change z and y?
i put on the badge instead of those 4 keys, so how would i now change the rgb settings? sorry noob here
As far as I know there isn’t a way to change the lights if you have the badge put in place. There is possibly a software but I haven’t looked
It says the keyboard is wireless but does it come with a wire too?
Literally in the first 40 seconds of the video.
Yes but does that work just as a charger or can you play with it in at all times?@@keebface
@@vixter3663 You can use it at all times. Whenever a keyboard is called "trimode" it is in reference to connectivity to the OS for use. Trimode is BT, 2.4ghz, and wired connection. For wired connectivity you just switch the mode switch to off and connect with the cable. If you leave it in bluetooth mode and connect with the cable, it will only charge, it won't be connected the OS via the wire.
Hey I just got the yunzii yz75 and I’ve been having this problem where the keyboard won’t turn on even with the usb c cable plugged in do you think it might be defective ?
Did you end up fixing it because I’m having that same problem
@@trulyricky1485 I'm having the same issue!! did you ever resolve it?
@@gracebyers4802unfortunately no, I have to use the wireless mode which is FN+4. If you found out how to fix wire mode let me know, I gave up trying to figure it out
@@trulyricky1485 hold fn+esc for 5 seconds and that should reset the keyboard and hopefully work
same ! it doesn't connect with the usb and it also does not charge, did you manage to fix it or just refunded it ?
nice
I bought the keychron v1 just before i sqw this 😭😭😭
I have the V1 and I prefer it.
same I wish I got this keyboard :,(
Why would you prefer yz75 over keychron V1. Is V1 better?
@@yale_elay9162 for me, build quality and typing sound/feel the V1 is better. However, the YZ75 is wireless and looks amazing.
@@keebface which one would u recommend for competitive gaming?
How does this compare to gmmk pro?
Totally different things. Can't really compare aluminium and plastic keyboards.
Hello pls help me my keyboard have no screen how to remove the back lid pls help
What do you mean, has no screen? I disassemble the keyboard in this video. You just need to watch it.
Some versions of this board do not have a screen. They have buttons in that place
@gregzy789_gaming4 same keyboard. You can swap between the two as shown in the video.
@@keebface this keyboard or the akko75 b?
@@gregzy789_gaming4 neither. Extra $30 for a Monsgeek M1.
where are the screws.
Best to watch the video.
maybe you can guide me on this, ive modded the keyboard and it sounds really really great... pretty loud and thocky.... ive only got one issue, well, 2.... my enter and my left shift key sound VERY quiet whilst the rest sounds loud... ive tried recleaning and relubing the stabs like 3x, also tried without lube, still very quiet... and its literally only those 2 keys.... any ideas?
too much lube
The stems on the stabilizers will be landing on the PE foam. You need to cut out the PE foam under the stabilizer housings.
@@RuinerWonglwell that wasnt it, i pretty much found out an hour later the 2 keycaps were just not on perfectly...as in just a slight little teenieweenie little bit
yummy
there is ZERO diffrence
blud is yapping for ten minutes and 6 seconds