Thank you for watching the video. Thought it was a good keyboard. We recommend customizing it once you get it. It's gotten a lot better. Please be careful when removing the top cover, it is hard to remove because it is firmly attached. happy keyboard life Sorry for the automatic translation.
Thanks for sharing! 🙏 Did you remove the silicone plate foam between PCB and the plate? Or did you put everything back together? I wonder will it be more poppier if we remove the silicone plate foam?
The silicone foam between the PCB and the plate remains intact. You will probably have a hard time fixing the switch. When you want to make the sound POP. To make the clatter sound softer The most effective is the tape on the back, so it may be better not to use one layer or tape there. If it doesn't sound like you expected than silicone foam Is it something soft like urethane foam? Since it is a gasket, compatibility seems to be good. talpkeyboard.net/items/60f790ac0536240625733ce6 happy keyboard life Sorry for the automatic translation.
@@toronyago-yt awesome! Thanks for responding and providing some suggestion! 👍 I want the sound to be more poppier or marblier. Already applied the tape mod with 2 layers of masking tape. 😁 I will try adding PE foam to the bottom case then. Or look for the kbdfans module custom plate foam.
@@BankruptGreek I used 2 layers of masking tape. It made the sound poppier. Lubing the Akko V3 Cream Yellow switches and using thick PBT cherry profile keycaps did the trick for me. The sound profile comes out marbly and poppy. 😅
thank you for your comment 2.5Ghz wireless delay is not felt by bodily sensation. I have not lost connection so far. However, the battery does not last long and the LED prompts me to charge it after about 5 hours. have a good keyboard life Sorry for the automatic translation.
I don't have that model Check Akko 5075S Unboxing & Review It seems to shine well. The 5075B is just as bright as this one. I think that there is also transparency of keySwitch😄
Robustness If it's durable, I think it's okay to just replace the switch if it breaks down. As for the casing, I think it's normal unless you intentionally break it. For normal games, there is no problem with USB connection and switch replacement, but If you are looking for a keyboard that requires response speed like FPS, the Woothig 60H seems to be highly rated in Japan. (Also DrunkDeer A75) www.amazon.co.jp/gp/bestsellers/computers/2151972051/ref=zg_bs_nav_computers_2_2151970051 From the above link Logitech (logi cool) accounts for most of the popularity of Amazon keyboards in Japan. I think you can imagine it at that point.🥲
Is it a slide switch? ( 3:18 ) I marked it with a pen, so I cut it out. The knob switch has a cushion on the PCB, so it remains as is. Sorry for the lack of explanation.
@@leinardesteves3987 If the switch or plastic parts are not physically damaged. Maybe it's because the Form is thick? How about returning to stock once and see what's causing it? I'm sorry that I can only answer based on speculation.
@@toronyago-yt yeah I think the foam is too thick, I just assumed we have the same size foam since I only used Polyfill. But I think I'll just have to use your method of modding with PE foam instead
This keycap is the keycap that comes with the purchase. Akko Blue on White ASA profile. In Japan, if you buy just the keycaps, it costs ¥8,000, so it's cheaper to buy the keyboard.
All LEDs are mounted on the back, There is a window for the LED on the PCB. The surface is smooth, and the back is full of mounted products. Sorry for the automatic translation.
@@toronyago-yt can i change rgb without downloading the app? Can I turn off the light of the keys when the light next to the keyboard is flashing blue?
@@Meowwoooooo 可能だと思います。 FN＋HOME でLEDを単色にし FN＋↓ でライトを消します。 Side LED は FN＋CTRL FN＋Z で変更すれば良いと思います。 I think it is possible. FN+HOME turns the LED into a single color and FN+↓ turns the light off. I think that the Side LED should be changed with FN + CTRL FN + Z.
@@toronyago-yt thank you i haven't received the keyboard yet but i want to buy it. I don't want to regret buying it because the dollar is very expensive in my country. would you recommend this? I also saw the epomarker ep75 model, it looks nice too.
Nice video 😀, I'm getting this keyboard soon can't wait
Thank you for watching the video.
Thought it was a good keyboard.
We recommend customizing it once you get it. It's gotten a lot better.
Please be careful when removing the top cover, it is hard to remove because it is firmly attached.
happy keyboard life
Sorry for the automatic translation.
Hey there, great video! Btw quick question did you keep the silicone foam inside the keyboard, or did you take it out?
Silicon foam is inside.
@toronyago-yt oh great, thanks for answering!
素晴らしいビデオはあなたの努力をステップバイステップガイドで感謝します
great video appreciate your hard work step by step guide.
Thank you for watching, let's enjoy making your own keystroke sounds!
Amazing keyboarding keyboard
hi, can i remove the stabilizers on the spacebar along with the bracket without disassembling the keyboard?
Answer is no
Because it contains silicone foam
Thanks for sharing! 🙏
Did you remove the silicone plate foam between PCB and the plate? Or did you put everything back together?
I wonder will it be more poppier if we remove the silicone plate foam?
The silicone foam between the PCB and the plate remains intact.
You will probably have a hard time fixing the switch.
When you want to make the sound POP.
To make the clatter sound softer
The most effective is the tape on the back, so it may be better not to use one layer or tape there.
If it doesn't sound like you expected
than silicone foam
Is it something soft like urethane foam?
Since it is a gasket, compatibility seems to be good.
talpkeyboard.net/items/60f790ac0536240625733ce6
happy keyboard life
Sorry for the automatic translation.
@@toronyago-yt awesome! Thanks for responding and providing some suggestion! 👍
I want the sound to be more poppier or marblier. Already applied the tape mod with 2 layers of masking tape. 😁
I will try adding PE foam to the bottom case then. Or look for the kbdfans module custom plate foam.
@@charlesalvadid you notice any difference with the tape?
Also is he fixing support rattle with the bandaid?
@@BankruptGreek I used 2 layers of masking tape. It made the sound poppier.
Lubing the Akko V3 Cream Yellow switches and using thick PBT cherry profile keycaps did the trick for me.
The sound profile comes out marbly and poppy. 😅
Great tutorial!
Great modding! Was wondering how's the 2.4Ghz wireless connection? Is it stable? Low latency?
thank you for your comment
2.5Ghz wireless delay is not felt by bodily sensation.
I have not lost connection so far.
However, the battery does not last long and the LED prompts me to charge it after about 5 hours.
have a good keyboard life
Sorry for the automatic translation.
2.5Ghz × 2.4Ghz 〇
Question. Does the B version have brighter rgb than the S (See-through) version? I have the S version and it isnt bright as ur B version
I don't have that model
Check Akko 5075S Unboxing & Review
It seems to shine well.
The 5075B is just as bright as this one.
I think that there is also transparency of keySwitch😄
this keyboard provide a very delicate typing and asmr sound experience, but is it also stable, sturdy and durable for gaming?
Robustness If it's durable, I think it's okay to just replace the switch if it breaks down.
As for the casing, I think it's normal unless you intentionally break it.
For normal games, there is no problem with USB connection and switch replacement, but
If you are looking for a keyboard that requires response speed like FPS, the Woothig 60H seems to be highly rated in Japan. (Also DrunkDeer A75)
www.amazon.co.jp/gp/bestsellers/computers/2151972051/ref=zg_bs_nav_computers_2_2151970051
From the above link
Logitech (logi cool) accounts for most of the popularity of Amazon keyboards in Japan. I think you can imagine it at that point.🥲
İs this good for gaming
Yes or no ?
How did you manage to fit the foam and still get the toggle switch to work?
Is it a slide switch?
( 3:18 ) I marked it with a pen, so I cut it out.
The knob switch has a cushion on the PCB, so it remains as is.
Sorry for the lack of explanation.
@@toronyago-yt yes the slide switch. My PCB cant seem to reach it when I close the board so it wont work properly
@@leinardesteves3987
If the switch or plastic parts are not physically damaged.
Maybe it's because the Form is thick?
How about returning to stock once and see what's causing it?
I'm sorry that I can only answer based on speculation.
@@toronyago-yt yeah I think the foam is too thick, I just assumed we have the same size foam since I only used Polyfill. But I think I'll just have to use your method of modding with PE foam instead
@@leinardesteves3987
If it's polyfill, why not try adjusting it by reducing only the bottom part?
It's nice and fluffy.
What keycaps? Those are nice and clean i love it and want it
This keycap is the keycap that comes with the purchase.
Akko Blue on White ASA profile.
In Japan, if you buy just the keycaps, it costs ¥8,000, so it's cheaper to buy the keyboard.
Are the LEDs raised? Polycarbonate plate?
All LEDs are mounted on the back,
There is a window for the LED on the PCB.
The surface is smooth, and the back is full of mounted products.
Sorry for the automatic translation.
@@toronyago-yt can i change rgb without downloading the app? Can I turn off the light of the keys when the light next to the keyboard is flashing blue?
@@Meowwoooooo
可能だと思います。
FN＋HOME でLEDを単色にし FN＋↓ でライトを消します。
Side LED は FN＋CTRL FN＋Z で変更すれば良いと思います。
I think it is possible.
FN+HOME turns the LED into a single color and FN+↓ turns the light off.
I think that the Side LED should be changed with FN + CTRL FN + Z.
追記
アプリなしではサイドLEDはRGBにしかできないので単色への変更は不可能でした。
@@toronyago-yt thank you i haven't received the keyboard yet but i want to buy it. I don't want to regret buying it because the dollar is very expensive in my country. would you recommend this? I also saw the epomarker ep75 model, it looks nice too.