2004 (B5.5, 2001-05) Volkswagen Passat Front Driver Door Complete Disassembly
HTML-код
- Опубликовано: 18 авг 2016
- Complete disassembly of the front left door of a 2004 VW Passat including all tools needed and tutorial from start to finish to remove any part from the door of a B5.5 Passat.
Specialty tools mentioned in video:
Clip Pliers: amzn.to/2bxF0fd
Triple Square Set: amzn.to/2bmyJCy
T-20 Torx Screwdriver: amzn.to/2b880L5
Awesome video. I wish everyone was that thorough and detailed when making videos. Thanks.
I am not sure as to why you disassembled your door, but thank you for doing it on camera. i was able to replace my release cable for the inside door handle of my 2004 Passat by using your video. Thanks again, and well done!
C'est un tuto pour démonter le lève vitre, la voiture va finir en pièces détachées 😉
Did you have problem with your lock?
@@Tom-jv3ij No, the release cable.
Thank you very much for this detailed tutorial. Now I feel confident to change the window myself :). Keep up the good work!
Amazingly well done! You just made my life a lot simpler! Thanks for a very professionally done video.
I looked at all the posts and this one is the BEST! Great job.. Thanks a ton.
Very helpful. One of the best tutorials I ever seen. Thanks
Thank you for showing how to do this. I'm changing out my drivers door and this is exactly what I needed to know!
One of the best turtorial. Tank you.
I never could’ve figured out how to this without this video!
Excellent video on the removal process for door lock actuator and handle. Good video work.
Thanks! This will help me replace the speakers in my 2002 VW Passat Variant... Plus, I learned a few new tricks.
Thanks been struggling with this and you just solved it.
Thanks for this video! I'm changing the Window aperture seal on the passenger side and this video really helps knowing what's behind the panels
Thanks for making this video - it was very helpful! I have to fix the window lift cable in my girlfriend's VW and I would have probably broken something if I hadn't watched this video first.
Greetings from Key West,
Capt. Blackheart Charlie
Thanks man, very good explained and show.
I'll try myself next days, i have some problems with the switches.
Thanks once again.
lovely video, cheers from Slovakia
Thanks for your tutorial...... at one point you mentionned when talking about your experience with the vw 12 point bolt , striping off the inside of the bolts!!.....I did that too... my question is how did you drilled them out.....any better way !?
Thank you
Very good and educational video. Please keep it up! You got a new subscriber today!
Thank-you! This helped me save a lot of hours trial and error....
Super easy fix. Thank you.
Thanks for this. The window on my car was 7/8 of the way down so I had to drill a 3/4" hole for the one nearest the door latch and remove the speaker for the other one.
Thanks a lot for this excellent video, it was a great help!
Thanks man window was broken gonna do it myself😤
Excellent tutorial. The window scraper strip removal and fitting sequence would be useful.
Thank you very much to share your knowledge for free. God bless you!
thanks so much for the video. I would like to know how I can service my door locks including the central locking mechanism because the central locking mechanism including the trunk locking has completely failed.I have a 2001 vw passat.
mil gracias , me fue de gran ayuda ya repare la mia
Useful video! Thank you very much
Dude you saved me!!
Many thanks for a great video. The lock on my driver side door freezes when below zero. Sometimes cant turn the key, sometimes cant open the door, and sometimes can't get the door to lock it shut. I guess there is moisture inside. Tried squirting in all kinds of oils, lubricants, multilube, graphite powder etc, but no fix yet.
I wonder - if I replace the actuator on the door - will I then have to have it matched to my car keys - or can I just take the key cylinder or what it is and swap it from the old actuator on to the new one?
Thank you very much for this video. With your help I managed to change my best friends door . It took me 2 hours. But I did it. :)
Thanks very much for the excellent tutorial. My take away - I am not going to try and will pay a skilled mechanic to get inside my Passat's door panel for the door lock module issue.
Thank you for your video, it was very helpful.
Thanks for this video, good tuto dude ;)
Thanks for the great tutorial
Thank you! My window was not going up, thought it was a motor, but it just needed to be plugged back in!
Thank you very much!
good job
Hello thanks for this excellent video 👍👏
thanks greg that was very helpful i dont have to pay the auto glass shop
Thank you very much
Helpful up to a point. Now I have a disassembled door which I can't take off coz he didn't show how to disconnect the harness! Great
Hey, did you ever find out how to disconnect the harness? I'm currently trying to replace the harness and have the same problem...
Yeh I took an angle grinder to the inner door skin...@@good_username_taken5069
Thank you!!
Hello,
thank you for your good job.
can you please tell me where I can find Passat 2003 rear door molding ?
thank you.
Great tutorial!
How do you remove the entire door from the hinges in a 2002 Passat
?
I need to know this
very helpful thanks
Brilliant just bought a 2002 VW Passat 1.9 TDI, this is going to be very helpful I bought it cheap, and have to do the window regulator and the bloody drivers door won't open from the inside and very hard to open for outside, anyway thank you.
great job, thank you
Thank you
Danke für das Video.
Awesome so much help , now just have to put it all back together lol
Bravissimo
Great video. Remember the days when it was fairly easy to repair stuff yourself? I bet these companies deliberately design them so they can maximize labour time in the garages and get more money out of you
Hi man thanks for the video. Do you or anyone also have a video about removing the front bumper of this car? I’m trying to replace my headlights.
THANKS! Now i know how to get into my wife's 5.5 to replace the mirror switch that my dog broke, two dogs ago! Better than the Bentley manual! Those 12 point bolts go back as far as the axles on 1969 type 1 type 2's and the large ones were used on rabbit head bolts. Those of us old enough to remember John Muir's Book: How to Keep Your Volkswagen Alive for the Compleat Idiot may still remember his proviso on thoroughly cleaning out the socket recess to avoid stripping them.
You so good. Thanks...
Do you have any video's on how to remove the door?
Well done. 👍
Thanks for the video l got a question may window drive size not go all the way up you know why
FINALLY I found a informatic video (sorry my English is REALLY bad)
12:50 in this move i found out HOW to remove the last part! I have a Passat 2011, wich that torx screw is destroyed, so i can not get the lock fixed, stocked. So I have to buy a new part, that part you took away in film (12:50 min)
THANK YOU!
i belive it is almost the same in passat 2011, back door???
My inside door handle keeps slipping (looses tension) when I try to open from inside (outside works fine). Works for few times then looses all tension again. This happened after I replaced window regulator. Is there way to anchor the inner door cable so it won't loose/stretch from opening door from inside? I was thinking of advancing inner door cable further behind regulator panel then taping it down?
Hard to find such a good video, thanks man. If i could - I would give you 100 thumbs up. 1 question though - my window does not go up well since a view days. i need several atemps to get up with the regulator motor. What is most likley the problem, the motor it selve or the cabel mechanism? What is the most likely reason? Sorry for my englisch. Rgds from germany.
Thanks for the walkthrough from 8:00-8:20. Shit almost gave me an aneurysm
Helpful
Great. Thank you
Thanks very much
thank youu bro
Any videos on fixing locks? My 03 Passat door wont open from outside..
What size of triple square key was needed?
My passenger door is stuck. I can't open from anywhere. In this case how do I open the door so that I can replace the lock mechanism? Thank you.
7:50, really need the curved pick, without it near impossible, I was getting very frustrated trying to get this out without the pick, tore my hands up, went to a local tool store and got a set for £10, so easy using the tool it just popped out
Those pins that you mention in the video that are missing, the black plastic ones in the upper left of the door that you have to pound out, you said to use a Phillips screwdriver and a hammer. Well I got them out, now how the heck do I get them back in? The plate behind the panel that they're supposed to go in isn't supported against the back of the panel, so I cannot simply pound them back in from the front, and I can't get enough support behind them either. Long-jawed channel locks to press the pins in and support the back at the same time??
i have a 2001 b.5 vw passat and i have to replace both front drivers and passengers inner plate as my windows dont work problem is i cant get the plate off and i cant get the two bolts for the glass to show themselves any help would be appreciated thanks
The Ekoe, I have the same issues . what have you done to solve the bolts issues please.
thanks
I have a 2006. I cant figure out where the bolts for the window track are. Holes are there but there are no bolts. Cant find a single video online.
my door locked closed, I can not open in any way what I do!!! please help me!
at 3:58 there should be three rivets there, someone didn't put it back last time,because it hard to put it back, Don't need to remove those rivets before remove the carrier panel, it will hard to put it back, I remove the carrier panel with the door lock all at once, first on rear door that fitted 1/4 window or wagon, you need to remove the short window's rail that fit front of the door lock, then remove the lock bolts and then you can remove the all out a little to easy remove the cable that from the outer handle to the door lock ,then can out at once.some models need to remove outer door handle at once.
after out ,then can remove and install the rivets easy., front door is easy because no window's rail there,, Hope this help!
Very helpful but... its good to mark on the side of screws and metal panel that hold the window to know how far we must screw in when we put the window back. Its need only two full spin to lose the window. Why to do that? To know how far we can go with the screws to not brake the window. "Gold" screw that hold the lock have precise number of spins to pull out the lock and then simple putt back, the number of spins is 12, no more no less. Sorry for my English :-)
zamek wyciąga się razem z blachą i jest dużo prościej
are sedan and wagon doors the same size and fit
Robert McGaha I have a 2002 Passat sedan and it is identical to this.
As soon as you disassemble the door, it's OK, but if you want to put it back together and not get tired, you have to disassemble this panel together with the lock. M the lock should stick to the panel on this plastic support, then it's easier to install and that's the correct technology for this work; ) Sorry for my English but it's the translator's fault;)
Why no more videos :(
Very good shit
Hello please help me identify the oem code for the left door open close sensor
VW Passat B5 GP Break (3BG, 3B6) 1.9 TDI (96 KW / 130 CP)
thank you
3BD 998 785 ，3BD 998 786 (note: the partnumbers are for left and right side, as the positioning plastic pins on the microswitches are placed differently)
@@wolforla thank you very much
id like to see you take the wiring out so you can replace the whole door . plz or shoot me a message how to
I'm also interested
kick panel by your left foot(Remove kick panel) has 3 plugs you'll see the wires coming through the door hole pull them to unplug them and they will pull right into the door.
What if the window glass panel doesn't go up at all?
Pls help me out cuz I am in this situation right now.
How do i do it if the dor is off the car 🙂
Thanks, save me.
I need that window damn it
I just changed the lock for a new
My window is stuck open off the track...so there's no getting behind it
LIKE
3:50 panel removed. 4:00 when did you knock the two plastic pins out of the lock holder? How do you put them back during assembly? The pins should remain there, the lock is removed together with the sheet after disconnecting the handle. Look: ruclips.net/video/K_QTf3Lpo7Q/видео.html 13:35 - 17:20. Then you don't have to stick your hands to the lock and use a hook to tear off the connector.
man.. mines is glued together and has rivets holding the panel in place.. bouta drill em out geeze this is irritating
lol, "flimsy" door panels. The door panels on my VW Fox were made out of pressboard. Thinner than the garage stuff with the holes you hang tools on.
slenkstį išarditi ir pereiti iki dešinės vairuotojo
This don't work for the 03 passat
I fail to see why this is such a bad door design..
what size torke bolt thing do i need for the door its self?
t-40? t-55?