Great video! I have to service a Toto. I think it may need a new gasket because its leaking from the floor and not the angle stop. I've never taken a toto apart before so this is very helpful.
Hola buen trabajo pero como es la parte donde se ajusta los tornillos de ajustes de los lados cuando se pone ya el toilet quiero decir la medida que no se ve en el plano..gracias
Did you put the required washers on the toilet seat bolts? Looked like you just screwed them into the rubber washers that were pushed through the holes?
Best time to install a toilet is BEFORE you have to paint around it and install molding. I like it when its too easy and you need to make just that much more of a pain in the ass.
Will the rough in fit a 3" flange? Bc the lip on the bottom wont fit through the 3" flange. And I'm looking at mine. The back part isn't flush with the front part so if I install it it looks like it will sit at an angle. Is it supposed to be that way?
I hate this fucking toilet, while it flushes great, it doesnt clean well at all, you have to aim at the deep 4" section that contains water, unless you want to flush 6 times to clean it. Always wondered how to remove the toilet. DONT buy. Great video.
Thanks for the video. I did what you did…. it’s pretty clear that you work faster than me. 😃
Great video! I have to service a Toto. I think it may need a new gasket because its leaking from the floor and not the angle stop. I've never taken a toto apart before so this is very helpful.
If it's very expensive big floor tile, might the drilling break the tile to pieces at all?
They should have painted the wall behind there first. At least one coat.
Excellent video! Thank you.
Hola buen trabajo pero como es la parte donde se ajusta los tornillos de ajustes de los lados cuando se pone ya el toilet quiero decir la medida que no se ve en el plano..gracias
The installation distance of my toilet toilet is not a regular 12inch but a 10inch. Can I install this toilet?
great video!!! thank you! now I know what i have to do!
Absurd
I'd charge triple to install these
Wait you measured the rough in off the baseboard? Thought it was supposed to be off the wall
Did you put the required washers on the toilet seat bolts? Looked like you just screwed them into the rubber washers that were pushed through the holes?
So , toto, toilets are compatible for , your standard toilets .. looks like a lot of work
Your drill man was trying his best to break that Drill Bit in the first video, a maniac!
Gracias amigo por la installation muy Bien entendida. Thanks bro
Nice vid. Is the toilet a 12" rough-in flange measurement ? How far is back of tank to wall ?
Good video but why use a drill for connecting the screws into toilet and not hand tighten when time comes to take off will be a headache
He had it on setting number 2 it’s hardly over hand tight in that mode
Best time to install a toilet is BEFORE you have to paint around it and install molding. I like it when its too easy and you need to make just that much more of a pain in the ass.
Ours we just installed yesterday and has an incredibly slow leak at the base. Tips?
Lmaoooooo you must go thru a shit tun of drill bits drilling like that LOL I watched you flex the bit on every hole !!! LOL
thanks for watching!! 😉
Nice! Thank you for sharing. I have a CT442CUFG40#01. Does it have the same installation procedure?
I thought Toto puts the fill hose on the outside of the tube. I don’t understand why?
This tolit sucks, I have one kids always poop on the front where the water doesn't reach. Changing the seat and now the bolt won't tighten.
How long did it take to install?
The installation was hell, never again. Not worth it, you can buy an American toilet and install a washlet seat. Works perfectly 🥰
Will the rough in fit a 3" flange? Bc the lip on the bottom wont fit through the 3" flange. And I'm looking at mine. The back part isn't flush with the front part so if I install it it looks like it will sit at an angle. Is it supposed to be that way?
Drilling holes where water can leak.. nope
REALLY?? 🤨
Thanks for this!
How to fix it if it's leaking at bottom of the tank？
do you like the way it flushes??
But how does the toilet tank lid attach?
Why the flush is so weak? Same thing happen to mine
Unfortunately, this is how this model works.
I have this one, it is not weak, it is rather powerful but just quiet. I has not clogged for several months for me.
No 👍🇲🇽💪
💯
What is the model of the toilet seat
👍🚽
Great video, I’m installing one in my house next week. Appreciate the ‘no talking’.
seems like weak flush
Not weak, just quiet. It's a washdown.
I hate this fucking toilet, while it flushes great, it doesnt clean well at all, you have to aim at the deep 4" section that contains water, unless you want to flush 6 times to clean it. Always wondered how to remove the toilet. DONT buy. Great video.
Referenced your vid many times while installing one in my house. Great content bro! You’re appreciated
Смыв сифоном круче