Oh oh, mine toilet is on the way and that water shutoff looks to be about 7” from toilet center to center of stem. Chrome trim ring gives me even less.
Now show us those annoying toilet seat screws.. delt with that unit and the toilet seat was loose and missing a bolt. the square makes big hands impossible to get In there.
Another tip for y'all: make sure the flange (side closest to the wall) is screwed FLUSH to the floor. If you don't do this, the golden bolt may have too much slack and will spin when you try to take off the top nut. This happened to me, and I ended up having to (barely) squeeze in a nut splitter to remove it. Good luck, gals and fellas!
Before you start, make sure your water shut-off is minimum 8" to the left. Otherwise the toilet will hit it.
Oh oh, mine toilet is on the way and that water shutoff looks to be about 7” from toilet center to center of stem. Chrome trim ring gives me even less.
Thanks, loved you as Hank in Breaking Bad
Very Good presentation and easy tutorial 👷🏼♂️ a good product also.
Hello,
For this particular skirtted toilet, does the flange need to be below, flushed or on top of the finish vinyl floor?
Thank you
I have a 8 inch floor rough in. Can I use this with a 10 inch rough in toulet
is it feasible to install if supply line is from the floor, about 5 inches from wall?
Great video thx
I would have made a point to alternate tightening the closet bolts on the wax ring...especially for as many pieces as that toilet comes in...
What is the "proper size bit"? Thanks.
So now there's two points that could leak....
BTW, which Toto toilet was this in the video ? Thanks , Gerry
Eco Soiree one piece elongated 1.28 gal ADA toilet
What's the name of the flange and the website to order
That’s a Toto Unifit. Only works with their toilets.
Install without toilet seat?
Installing toilet seats after the fact on a skirted toilet is a pain in the ass.
Thanks.
Sure,thanks for watching.
Nice
Toto auto flush addition
what size bit are you using?
sir_Xenon
This was a 1/4"
sir_Xenon 1/4"
this price please
$7.500.00 in California
What brand toilet is this please?
Toto Eco Soiree
@@charlesclinger5525. Outstanding brand is Toto. I’ve just bought a Kohler Wentworth.
Looks like a good dookie would plug that flange up.
Hey dad
Hi Son.
I m join your gurop
You should try Relton drill bits for drilling tiles. There inexpensive and life changing for tiles.
Now show us those annoying toilet seat screws.. delt with that unit and the toilet seat was loose and missing a bolt. the square makes big hands impossible to get In there.
That trapway size is very optimistic as far as the size of the more substantual girth of log clearance is concerned 🤔
Another tip for y'all: make sure the flange (side closest to the wall) is screwed FLUSH to the floor. If you don't do this, the golden bolt may have too much slack and will spin when you try to take off the top nut. This happened to me, and I ended up having to (barely) squeeze in a nut splitter to remove it. Good luck, gals and fellas!
It will be with easier installation for the skirted toilet with side access to fixing bolts on the traditional flange.
well made and informative, Thanks
Thank you.
Needs the ring
Professional plumber using channel locks to tighten nuts?????
Not to mention he used them backwards
Knipex is better
They use them for everything
Those are what plumbers use.... for everything. Not sure they know what a box or line wrench is..lol
@@macleanclassics As a certified master toilet mechanic [plumber], I endorse this comment.
Velcro on toilets.... *SIGH*