I live in a country where it is difficult to buy filament, however there are lots and lots of bottles available for free. I am trying to build a filament extruder. I'm on an extremely limited budget. Your video is the best one yet. After watching it, the task doesnt seen so scary. Thank you.
Well, i got a cutter with the machine i traded months ago, but never managed to cut straight and acceptable lines with any of the cutters i had... 100% i will make it automated, so the fila maker machine will pull the line to cut it (slow, but more accurate) but i would need the Perfect cutter for it... The one i got is similar to this (but sadly no rod to hold the bottle) but never really worked out. There comes the problem you mentioned at the end, the bottles. We dont really have straight bottles (didnt even see any in our stores) but using heat is ruining the process, or a part of the bottle if you ruin it by accident, and some of the crap shit EU bottles cant even manage the heat so the bottlecap will fly off literally.... :D
Hi, yes I have it, but I'm still tuning it, when it's ready I can provide it. But that's in the next videos. Now I'm running a little late and I'm tuning the printer, so my work on the PET bottle cutter is getting longer.
Hello, I think this is the mentioned problem. In other words, the bottom of the bottle is not straight and is very crooked, or the tape guidance is generally bad.
Thank you for your interest, the whole concept is still in the design phase :-) I'm working on another video, but there's still not enough time for it :-/ :-)
Thank you for your interest, the whole concept is still in the design phase :-) I'm working on another video, but there's still not enough time for it :-/ :-)
![Chlöe - Shake (Feat. Jeremih) [Official Visualizer]](http://i.ytimg.com/vi/aDs_1ufpfv8/mqdefault.jpg)
I live in a country where it is difficult to buy filament, however there are lots and lots of bottles available for free. I am trying to build a filament extruder. I'm on an extremely limited budget. Your video is the best one yet. After watching it, the task doesnt seen so scary. Thank you.
Great, thank you and good luck!
Use a bicycle pump and attach a nozzle at the mouth with the cap. Pressurize and slowly heat up.
real voice ,can the music
What is the best strip size for making 1.75mm filament? 8mm?
nice design, thanks for sharing
Well, i got a cutter with the machine i traded months ago, but never managed to cut straight and acceptable lines with any of the cutters i had... 100% i will make it automated, so the fila maker machine will pull the line to cut it (slow, but more accurate) but i would need the Perfect cutter for it... The one i got is similar to this (but sadly no rod to hold the bottle) but never really worked out. There comes the problem you mentioned at the end, the bottles. We dont really have straight bottles (didnt even see any in our stores) but using heat is ruining the process, or a part of the bottle if you ruin it by accident, and some of the crap shit EU bottles cant even manage the heat so the bottlecap will fly off literally.... :D
😀
Thnx
hey, could you send me the nozzle your using? because ive tried drilling a nozzle but the drill bit kept breaking
Hi, do you have a link to your STL for the bottle cutter? I would love to use your design, looks great.
Hi, yes I have it, but I'm still tuning it, when it's ready I can provide it. But that's in the next videos. Now I'm running a little late and I'm tuning the printer, so my work on the PET bottle cutter is getting longer.
Just post the STL… we are dying to give your model a try LOL. If you are like me, I won’t get back to it for a year. Love your video!
Por qué se me parte muy a menudo??
Muito bom!
Dear sir, how can I overcome that the bottle creeps up and the strip gets smaller and smaller, even a weight on the bottle did not help
Hello, I think this is the mentioned problem. In other words, the bottom of the bottle is not straight and is very crooked, or the tape guidance is generally bad.
do you have the stl files public?
Уже есть вариант с шестеренками для настройки ширины ленты .
muy buen videos pero la segunda parte??? y el stl¡
Can you please share the stl file of the bottle cutter?
Thank you for your interest, the whole concept is still in the design phase :-) I'm working on another video, but there's still not enough time for it :-/ :-)
Always welcome drive.google.com/drive/u/0/mobile/folders/1dZt_md5HvzvhJHkd0jt-X09GqNWF04Xx?pli=1
Oh PET like P E T cutter... I was looking for something else.
Bom dia brohter, excelente o conceito, mas está faltando o link do STL! Ajuda a gente aí vai! :)
Thank you for your interest, the whole concept is still in the design phase :-) I'm working on another video, but there's still not enough time for it :-/ :-)
1.75 mm nozzle how to get
bonjour je cherche le fichier merci
Це український канал? Щось не зрозумів)
це не український канал, ти що не зрозумів?
- Головне щоб не пацакідорський.
Вибачте, але я не знаю, що таке пацакідорський? :D
@@inventions654 - Один з варіантів називати русскіх.
@@inventions654 якщо б зрозумів то не питав би 😉