Good Day Gentlemen,I have not commented for a WHILE BECAUSE my phone has been stolen .This is the ultimate project ,CAN'T WAIT TO SEE THE COMPLETION OF THIS PROJECT AND THE OUTPUT REGARDING THE ENGINE PERFORMANCE .
you can check the new amarok presented in argentina days ago in the same platform, not the ford one ,looks awesome in the front that is the only change and you can have the only one there
This is probably my favourite project you lads have taken on, so glad to see it's back in action. Reminds me of the Dodge RAM 1500 Express trucks; single cab work truck with a 5.7 HEMI - although I'd take the 6.0 V12 TDI lol. Intrigued to see what you do with the front bumper, a more aggressive front end for these trucks would be great.
if you dont have any springs in the car could be lowered by as much as 10 c. that is why you have so much static camber. once you put a spring in it you may find the camber comes back to a streetable 1.5-2.5 degrees
How are you guys wiring the engine and transmission to swap into this chassis? Are you using the factory TDI V12 ECUs? Standalone Harness? Excited to see the this project is still alive
Do us all proud mate Graft an Audi grill into that bumper. The world needs an Audi Ute and it should have already been done vw group and definitely before Kia 😂
@DarksideDevelopments ever thought of using the Amarok running gear and using the Beetle/VW Vocho conversion as the body work. Would be an interesting build 👍🏻
@@DarksideDevelopments Well if it was built-up a bit , better torque converter and stuff I feel like it should handle the power those are really fucking good which you of course know, and I really wanted to see the fuel economy if that V12 had 8 gears.
the founder of fueltech together with a german friend managed to make a audi 1.9TDI works with Fueltech manegement guys will try tunning up the v12tdi with progamable injection software or will stay with the original ECU? or use both even?
@@DarksideDevelopments maybe a dually like wide body just for the rear wheels, you'll want donuts in the front anyway so a whole wide body would be weird, but race slicks needed in back
Good Day Gentlemen,I have not commented for a WHILE BECAUSE my phone has been stolen .This is the ultimate project ,CAN'T WAIT TO SEE THE COMPLETION OF THIS PROJECT AND THE OUTPUT REGARDING THE ENGINE PERFORMANCE .
❤
This thing will be absolutely savage when it's running
Great job from the Team. Been waiting this update. Hope next we will have a R8 V12 swap. By the way I enjoyed the Drum N Bass music.
Thank you for turning dreams into reality.
The most interesting project for me you have going at the moment.....excellent work.
This is amazing and actually the most ultimate engine swap ever.
Great update on this craziness. Looking forward to more
I had this idea and I am sure you came to the idea the same way.. biggest on brand engine swap. Bravo, so sick.
Epic, keen for another one
Looking great, great video and thsnks for the update
Cracking work on this build, its definitely turning out to be my kind of toy 👌🏻
Cant wait to hear and see it run
Für diese ausgefallene Kreation lasse ich ein Abo da.
Sehr sehr gut gemacht.😊
Ihr seit der Hammer.👌
Thanks and welcome!
Big Yes 🤙🤙 Bikes in the Back 🤙🤙
Off We Go, V12 Diesel Torque Powwwwer
Super cool project
Hey, i said 2 months ago that we need to see this in autobahn AND nurburing too if possible
you can check the new amarok presented in argentina days ago in the same platform, not the ford one ,looks awesome in the front that is the only change and you can have the only one there
They do look good! Probably what they should have done with the ones we get!
Can't wait to see the end result for this 🤩
You create such wonderful projects that it made me want to work with you :)
This may be the most ultimate engine swap ever
This is probably my favourite project you lads have taken on, so glad to see it's back in action. Reminds me of the Dodge RAM 1500 Express trucks; single cab work truck with a 5.7 HEMI - although I'd take the 6.0 V12 TDI lol. Intrigued to see what you do with the front bumper, a more aggressive front end for these trucks would be great.
Exciting times,cheers chaps 👍💪😉
Belle vidéo 👌 😉. Super Amarok 👍👍
It's going to be abit of beast 🔥🔥🔥
Oh man i wish to join u guys doing this type of job ✌🏻👨🏽🔧💪🏻
Saw this a couple of weeks ago in Newark. It’s a menace.
GO GO GO !
This is so sick 😮💨
finally some news on this
Yes 😊🙌🏻🙌🏻
I think a steel off roader bumper colour matched would go harder than the grafted one tbh
Put the new dashboard and the head and rear lights from the facelift when you finish.
This is gonna be something special only darkside can pull this off 😈
Great work
if you dont have any springs in the car could be lowered by as much as 10 c. that is why you have so much static camber. once you put a spring in it you may find the camber comes back to a streetable 1.5-2.5 degrees
We want it this low so we are making custom arms.
Radiators and oil coolers. In the truck bed with thermo fans.
BEAST !!!!!!
Great project and fabrication. Are you not worried about the amount of water/crud that the x-member will collect through the holes?
Don't think it should be too bad. Under tray will help a little but it won't be used all the time so it'll be minimal the amount that would collect
@@DarksideDevelopments ah I see. Yeah didn't think it would be a daily driver haha. Cheers for the reply.
Nice Shoptruck ;-)
awesome build boys, but what I'd like to know is what sort of power figgers are you aming for.
1000bhp would be a nice figure for it
we need see this in autobahn
How are you guys wiring the engine and transmission to swap into this chassis? Are you using the factory TDI V12 ECUs? Standalone Harness? Excited to see the this project is still alive
The factory ECU's are wired up to run without the Auto box :)
Do us all proud mate
Graft an Audi grill into that bumper. The world needs an Audi Ute and it should have already been done vw group and definitely before Kia 😂
@DarksideDevelopments ever thought of using the Amarok running gear and using the Beetle/VW Vocho conversion as the body work. Would be an interesting build 👍🏻
we like the single cab!
Please tune it like it is a double 3.0 tdi, 1000hp on a straight piped v12 diesel would be nuts
I think the rear axle will crap very quickly from such a torque)) 💫💥💥
We'll be swapping to a Ford 9 inch rear axle to help with that
@@DarksideDevelopments nice!
For tax reasons, this is quite an interesting proposal from a commercial point of view, building some more units.
I wonder if they make an extended shifter fir the t56. You could then use the factory hole and interior parts.
Yeah we can sort it :)
OH BOOOOYYYYYYYYYY
Nice
Will the v12 engine be built up at all or just put in stock everything 🤔
You just know 1000bhp is coming 👍
@@alancobbin 😅
We will see how far we can take an unopened engine first!
I like it
Wouldnt built-up ZF8HP be better for this?
Not sure it would handle the power we want in it. Know the T56 is tried and tested so. Plus manual makes it far more fun
@@DarksideDevelopments Well if it was built-up a bit , better torque converter and stuff I feel like it should handle the power those are really fucking good which you of course know, and I really wanted to see the fuel economy if that V12 had 8 gears.
More arosa content please let's see the 8's
the blue amarok is from south africa and is powered by a twin turbo hemi
Looks well
Will this be raffled off once it complete? I’ll buy a ticket or 5 ☺️
Most likely not, it's a long term project that we plan on keeping as a work/show truck
Wish y'all could have mounted the engine in the rear.
Would have been pretty sick! But it needs to be practical as well
I hope the engine gets at least 2x GTD2872
They could even go twin 30 frame turbos with the 6.0L displacement - interested to see what they pick.
the founder of fueltech together with a german friend managed to make a audi 1.9TDI works with Fueltech manegement
guys will try tunning up the v12tdi with progamable injection software or will stay with the original ECU? or use both even?
Probably original ECU to get it running and then potentially something else later down the line if it isn't playing
For the algorithm! :)
Is the Audi R8 1.9 TDI also comming?
Maybe one day 👀
@@DarksideDevelopments😎👍🏽
LETS GOOOOOOOOOOOOOOOOOOOO
Whens the prize draw😂
I ask you to fit bigger turbos on my v8 A8 which you said you couldn't do but you can squeeze a v12 in that
If you do it for a customer you need to provide a warranty. This being custom build and for own use doesn't need warranty
There is no budget for this project!
Final amarok?????????????
would love to get my hands on one of those custom moulded front bumpers shown if anyone has a link?
Definitely a custom job that a body shop may do
What wheels are on that 4 series at 19:43, i want a set for mine haha
Not 100% sure but could be either Vorsteiner V-FF 104's or Autostar Chicane's
18k for that brake set 😮
What gearbox are you using?
T56 Magnum
@@ryanp6138 ouhhh nice
Can this engine be swapped on the W210? can you write the dimensions?
Anything is possible... We have a 3D scan if you really wanted to try. Please email us.
Timeattack replacement for the rs3?
Can't have carbon brakes due to MSUK rules
@ryanp6138 o yeah forgot about that
👍🏼🇦🇪🛠🚙
Fucking savage. U must swap those halogen units with some xenon ones.
We certainly will!
Ok, now lift it and put some mud tires on it.
Martinez Eric Hernandez Paul Young Matthew
Hi
Hello 👋
Please please please dont widebody it
Probably going to widebody it. Wider body, wider wheels
@@DarksideDevelopments maybe a dually like wide body just for the rear wheels, you'll want donuts in the front anyway so a whole wide body would be weird, but race slicks needed in back
No truck should ever be lowered.
Call it a ute
No
With the power we're aiming for, it needs to be lowered
There’s a reason your comment is at the bottom, because so many people have disliked it
ПСИХИ