BMW Fault Code 5DC1 ABS Traction Control, Easy Repair.
HTML-код
- Опубликовано: 6 фев 2025
- The 2009 125i Was Having ABS & Traction control Issues, with the Fault Code 5DC1 Stored The ABS rings look favourite.
The easy fix is to space the abs sensor with a small washer less than 1mm thick.
Link to parts and tool used in the video:-
Link to washers on amazon £6 amzn.to/3vTEemy the ideal thickness is 0.5mm - 0.9mm
Sealey Trolly Jack £159 amzn.to/3Vzd6nC
Milwaukee impact gun £394 amzn.to/3erqEz6
Wurth Rost off £8 amzn.to/2RuftNo
Aluminium Grease £18 amzn.to/40qxoTU
Emery Cloth amzn.to/3l6Vt26
Pliers £8 amzn.to/3l6Vt26
Milwaukee Gloves amzn.to/3DDPk3D
Allen Key Sockets £16 amzn.to/3DCCnat
Milwaukee Light amzn.to/3kXNMuS
I have associated videos on the subject, I will list them below including how to check eobd codes.
How to replace the ABS Rings • BMW 318D ABS Ring Repl...
EOBD Code Reader review
Topdon artidiag 600 • 🇬🇧Free Updates For Lif...
Tools and code readers to buy . www.amazon.co....
Topdon artidiag 600 diagnostic tool £199 amzn.to/3i8Hrf3 with free updates for life!
Rear ABS Replacement Ring on Amazon link, amzn.to/2Zq06W1
Rear ABS Replacement sensor on amazon, link, amzn.to/39h8Thk
Was driving my car this weekend and it decided to throw the standard abs ring codes 😂 I used a .83 washer as a spacer and took it for a drive last night, no more codes which I'm happy about as I'm off to the Nurburgring this weekend. Worse case scenario is I won't have any driving aids or cruise control 😂 thank you for the video, really easy to understand
Thanks for the great information👍🏻👍🏻🛠
Good job Ant neat little trick, See the supervisor turned up to see if you was doing a good job and not slacking lol... Keep them coming
Will do, she’s never too far away keep an eye on where we are. Bless the old dog 🐶 Thanks for the great comments👍🏻👍🏻🛠
Loved the dog. I am not a great mechanic. This might be the solution for my old 3 series saloon BMW diesel. I have info to take a professional. Thank you. I also like the links to tools, equipment and for DIYer. I was impressed by the Top Don thing as I am a professional software engineer and just not so practical with my hands..
Glad it helped Thanks for the great comments👍🏻👍🏻🛠
Brilliant. Worked on my 2010 e91 320d a few days before its mot. Allowing me to order the ring kit and get it mot'd. Cheers.
Thanks for the great comments👍🏻👍🏻🛠
Awesome video. Have the same on my e82 125i but the ring didn't solve it. Code was gone for a short while, say 15 minutes of driving back from my mate. So me and my mate suspect faulty sensor by being to late. This helps a lot in what to do next, so thanks!
Thanks for the great comments👍🏻👍🏻🛠
Worked perfectly on an E87. 118d. 1mm washer.
Great stuff, Thanks for the great comments👍🏻👍🏻🛠
Good idea with the spacer. On my 1 series (E87) and the E90 of my parents (sold since I fixed it) I replaced the worn sensors with new ones and just didn't thread the screw all the way so the sensor still was out by 1-2mm. "Fixed" it without having to replace the ring or drive shafts. I like your idea better with putting in a spacer, that way you can't tighten the screw too much by accident
Works like a charm, Thanks for the great comments👍🏻👍🏻🛠
Perfect idea. Saved me 1 or 2 thousands!
Glad it helped! Thanks for the great comments👍🏻👍🏻🛠
Cual es la idea? No entiendo el vídeo. Puedes resumir? Le doy a traducir para saber
Hi, mate.
I've been watching all of your videos, and they were very helpful. Especially about City bug, as I have had one. Now I have a Corsa d 2011 ecoflex 1l petrol (39k on clock) , and it had problem with timing chain, after the replacemenet car started and has engine light on. I've diagnosted and the code appeared to be crankshaft sensor. Sensor got replaced, yet the light is still on. I was advised that I need to check timing chain alignment, because the car had no power and engine was shaking. I bought timing chain alignment tool to adjust, and i tried to fix it. First time the car was still running, but no change. After that I tried to align several times, but my tool isn't accurate with my car. Car isn't starting now at all. The smell of petrol is coming from spark plugs, I've check them and they were full of the fuel. I cleaned them, tested them, return back, but car isn't starting at all.
Do you have any advise what and where to look to just make this car to start, even if it has engine light on dashboard still on?
Thx
Sounds like the timing is the issue, why did the chain need replacing after 39000 miles is there an underlying issue with the engine, ie oil pressure chain tensioner issue Thanks for the great comments👍🏻👍🏻🛠
I was advised by others to change the chain as the car was a non-starter when bought. I'll look up by your advice further on, and let you know the outcome.
Thx!
Nice cheap fix brilliant idea saved some work 👍
Thanks Norm, The Topdon worked well nice and quick to get the codes a washer fitted job done Thanks for the great comments👍🏻👍🏻🛠
Sehr schön, bei so einem alten Auto darf mann auch mal trick'sen. Danke für das video 😎👍
Thanks for the great comments👍🏻👍🏻🛠
Evening Ant
Great little tinkering there & fix.
Topdon scan tool coming in handy again.
Hope ya self & all the gang r ok
Stay lucky. Stay safe. Stay healthy.
Alan L200
Thanks Alan. I am really like in the Topdon tool nice and quick to get a reading another little job done Thanks for the great comments👍🏻👍🏻🛠
Channel is brilliant mate.
I will pop your name in the hat, Good luck in the prize draw on the 6th November!! Thanks for the great comments👍🏻👍🏻🛠
great solution, worked for me as well. thanks a lot mate
Glad it helped Thanks for the great comments👍🏻👍🏻🛠
7:40 good man, every real man and good beemer fan should take a moment of geeking out with the car issues and show some love to their dogs.. i cant wait to get me a mutt, right now I have a turtle doing her turtle thang and while I thought turtle would be no fun, i was wrong... turtles are awesome, chill and taught me to ease my ways and things work out eventually without stressing.. plus she is blind on one eye, so this turtle is twice as chill, cause she literally does not care about the world on that blind other side of her face, unless she turns her head, I would wiggle my finger inches away and she would not flinch but as soon as the good eye catches it in peripherals she ducks and goes into her home haha cheeers, gonnna try to fix my own abs.sensor issue coming and going on my 735i 1996
Good luck you can do it!! Thanks for the great comments👍🏻👍🏻🛠
I just did my bmw 318d abs sensor. I put a little ring on the t30 bolt and the abs light went but comes back when driving. Specifically every time I start the car the abs light goes and returns as I drive.
you might need this next ruclips.net/video/rBlTHK29x8c/видео.html Thanks for the great comments👍🏻👍🏻🛠
My 320d had 5DC2. Tried 1mm washer and that changed to codes 5DC1, 5DC2, 5DC3 & 5DC4! So presumed washer too thick, replaced with a 0.3mm one and cleared the codes, will do a test drive in morning and see whats what. Possibly time to for a new sensor and install it with a washer from the beginning as currently one looks v worn down.
Yes if the end of the sensor has been worn down too far the sensor is scrap, try a new sensor with a wafer thin washer should work for a few years, Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 Just wanted to follow up on this : I installed a new sensor today (15 quid amazon) with a relatively thick 1.2mm washer and was surprised it cleared all faults after driving only 50 yards :) Fully expected it to be too far from reluctor ring but nope, all good!
Great video, but didn't work for my E90,😢. inserted washer on both rear sensors ( both are worn a bit) and now in addition to a circled triangle, the ABS appeared and the DTC button stopped working. Please advise what are my options. Thank you for supporting
This is the next step if the spacers don't work ruclips.net/video/rBlTHK29x8c/видео.html Thanks for the great comments👍🏻👍🏻🛠
hi ant ,,on the my aygo the sensor ring just fell to bits ,,than the sensor broke inside the stub axel ,,had to get new wheel bearing ,,then it was fixed ,,car now sold and a another city bug bought this time c1 ,,2016
Very nice a newer model hopefully it will be as reliable as the old one, Thanks for the great comments👍🏻👍🏻🛠
@aaanton11 hope so..its a wee cracker 1.2.this time furio edit..
Hi! Nice video and lovely dog!
E91 from has 2010 has a problem with traction control kicking in randomly and the same warning light flashing. The only error code that has been found however is DPF filter. Have you heard about it?
Cheers!
It is usually the abs ring issue, if you have a code scanner and can do a graph scan on the rear sensors you can see which one has a smooth line and which is uneven showing corrosion, Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 Thank you for the reply
@@aaanton11 Thank you so much for making this video! It was really super helpful in identifying the problem an!d fixing it!
Hi im having this code on my E46 M3 along with a rotational rubbing sound would this be the cause of the sound???
Check the sensors in a graph if you can on your scanner, you will see one is misbehaving, Thanks for the great comments👍🏻👍🏻🛠
Many thanks
Thanks for the great comments👍🏻👍🏻🛠
Hi i seem to be having this same problem with an 2011 E90 . Can i ask does spacing the sensor stop the ABS working? would you not ust replace the sensor. I've just disconnected and resetted the ABS ECU see if that does anything.
No the abs works fine, the washer needs to be less than .7mm this just allows for the swelled ABS ring, Thanks for the great comments👍🏻👍🏻🛠
@aaanton11 Jesus!!! Just started the car and the all hells broken loose. Wipers won't turn off and dash has every conceivable warning light on!! Is it cause I've not connected the ABS junction correctly!! I dare not open the bonnett..
EDIT I've just been under and yes!! To prevent the shock of your life make sure the ABS connection is fully secured!! Goodness me 🙈
Wow!! 😂 These faults can be crazy, modern electronics can throw some strange issues, glad you fixed it, Thanks for the great comments👍🏻👍🏻🛠
I have the same error, and the car panel basically goes crazy in the middle of the street. I will tray to do what you do in the video, except Im not a mechanic and that scare me.....let you know how ends up. Need to buy the tools first.
Good luck, Thanks for the great comments👍🏻👍🏻🛠
Hi pal so after i do this will the warning lights on my dash disappear automatically or will i have to get a diagnostic to remove them? thanks
You will need to clear the codes, or they will stay stored, Thanks for the great comments👍🏻👍🏻🛠
Do you put a spacer on every ring. And will the system still work.
only on the one thats faulty, works like a dream, Thanks for the great comments👍🏻👍🏻🛠
Worked for me.
Thanks for the great comments👍🏻👍🏻🛠
Had abs sensor and driveshaft replaced error still comes up
What code do you get? Thanks for the great comments👍🏻👍🏻🛠
Thanks for the great tip what size washer i know its 0.5-0.9 thick but the diameter please is it M8 ?
M6, Link to washers on amazon £6 amzn.to/3vTEemy Thanks for the great comments👍🏻👍🏻🛠
What were the driving symptoms before you repaired the sensor?
@aaanton11 hi, aanton, but the m6 in this packet is 1mm thickness, isn't that too thick? Doesnt it need to be 0.5mm at m6?
it worked for me too, can we call this a permanent fix or should i replace ABS ring?
Permanent until it fails, which for me was another 3 years, then I replaced the rings video here ruclips.net/video/rBlTHK29x8c/видео.html Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 can you provide more details please, how did it fail? did it do any damege to other components? how did you notice it..by sound or ABS light? thanks a lot!
Brilliant video 👍
Thanks for the great comments👍🏻👍🏻🛠
My 320d has started to kick in the abs after driving in the wet.
Try the washer Thanks for the great comments👍🏻👍🏻🛠
Thank you.
You're welcome! Thanks for the great comments👍🏻👍🏻🛠
Nice one mate good job
Thanks for the great comments👍🏻👍🏻🛠
great work
Thanks for the great comments👍🏻👍🏻🛠
Un resumen en español?
Sorry I don't speak Spanish, Thanks for the great comments👍🏻👍🏻🛠
Right mate. This not a proper fix at all, this problem will return sooner than later it’s temporary bodge that will only work for a month or weeks. There is only one way to fix this common problem with older BMW with these exposed rings is to remove the driveshafts and fit new reluctor rings and sensors. The ring damages the sensors when it rubs and contracts the sensor. This definitely not a proper fix only bidding a few weeks or a month and the lights and grabbing brakes will be back and the car kangaroos down the road utill you replace the both rings on the drive shafts and new sensors. I have done all this before on all my old BMWs it’s a common problem on older cars. You can still drive the car if you hold down the ABs button for 5-seconds and turn off the ABS and traction control but it resets after you tun off the engine.
To fix it properly you have to remove the drive shafts clean them from rust and fit new reluctor rings on both shifts and fit new ABS sensors.
The washer repair can last over two years, then ring replacement is needed like I did here ruclips.net/video/rBlTHK29x8c/видео.html this can save you a lot of time and effort if you are not keeping the car for a long period Thanks for the great information👍🏻👍🏻🛠
Mine thinks its going betwen 130 and 650kmph on all 4 wheels even when still :(
Try disconnecting the battery for 10 mins, Thanks for the great comments👍🏻👍🏻🛠
Actual sensor for 1 series and e90-e92 are different am I right? Mine seems bit slimmer.
my e90 and e82 are identical, Thanks for the great comments👍🏻👍🏻🛠