Размер видео: 1280 X 720853 X 480640 X 360
Показать панель управления
Автовоспроизведение
Автоповтор
Thank you for this you made it look so easy!
This turned out beautiful!
El sanatı harika dostum Güzel bir paylaşım olmuş....
Thank you for this. I’ve been wanting to make one
Thanks for the feedback
Came out great!
Thank you 🙏
Ciddi emek harcadığınız belli. Başarılar dilerim 👍👏👏👏
Çok severek izliyoruz
What’s the cut length on the top 2x4s and the bottom 2x2?
table is 60in minus about 8in for legs and about 1-2in for over hang. I'd say about 50in long.
How many pieces of 2X4s did you have? Also could you list the wood you used with how many??
I don’t really remember , it’s been a while. Sorry
Hello, Great work! @10:41 what type of screws are using there to get through 2*4 into table top? Thanks!
It was 2.5” pocket hole screw. I made a hole with the drill first to make the screw to reach the table top.
Awesome!
Thanks
what is the glue for? 🤔
What do you mean?
@@DanielDemir im just asking why did you put some glue on the wood unions
nice!!
Can you provide a cut list?
Everything I have is in the description. I don’t have anything else
Videolar çok güzel
How much would you say you spent on materials?
Stephanie Castellanos probably about $30
I don’t remember but probably about $30-40
awesome 👍🏻
looks great! did you make the X using 2x3s or 2x2s ?
shakeswell I used 2by2 s
how did you fix the noticeable wobble of the table?
It’s been a while, I don’t remember but I think I used leg pads.
What do you charge if making one for someone? And what state are you in, im sure it makes a difference for what people will pay?
$300-500, depending on where do you live.
Do you have a site to sale your creations? It was great!
No, I don’t. I have a Facebook page. Search for DIDwoodworking
Trump hota to Afganistan ka ye issue nahi hota
Thank you for this you made it look so easy!
This turned out beautiful!
El sanatı harika dostum Güzel bir paylaşım olmuş....
Thank you for this. I’ve been wanting to make one
Thanks for the feedback
Came out great!
Thank you 🙏
Ciddi emek harcadığınız belli. Başarılar dilerim 👍👏👏👏
Çok severek izliyoruz
What’s the cut length on the top 2x4s and the bottom 2x2?
table is 60in minus about 8in for legs and about 1-2in for over hang. I'd say about 50in long.
How many pieces of 2X4s did you have? Also could you list the wood you used with how many??
I don’t really remember , it’s been a while. Sorry
Hello, Great work! @10:41 what type of screws are using there to get through 2*4 into table top? Thanks!
It was 2.5” pocket hole screw. I made a hole with the drill first to make the screw to reach the table top.
Awesome!
Thanks
what is the glue for? 🤔
What do you mean?
@@DanielDemir im just asking why did you put some glue on the wood unions
nice!!
Can you provide a cut list?
Everything I have is in the description. I don’t have anything else
Videolar çok güzel
How much would you say you spent on materials?
Stephanie Castellanos probably about $30
I don’t remember but probably about $30-40
awesome 👍🏻
looks great! did you make the X using 2x3s or 2x2s ?
shakeswell I used 2by2 s
how did you fix the noticeable wobble of the table?
It’s been a while, I don’t remember but I think I used leg pads.
What do you charge if making one for someone? And what state are you in, im sure it makes a difference for what people will pay?
$300-500, depending on where do you live.
Do you have a site to sale your creations? It was great!
No, I don’t. I have a Facebook page. Search for DIDwoodworking
Trump hota to Afganistan ka ye issue nahi hota