What I like best about this video is that you did not insult viewers by playing sappy stupid music while you built it. So many videos now days that proclaim to be how-to videos are really just ego trips for people who play sappy music while we watch. Nothing how-to about it. But yours was great. Thanks for sharing the detail, it is so very helpful. Your table came out great.
I totally agree. It is exactly what I was looking for. He showed how he built it, and provided tips along the way to be more efficient at building the table.
Two valuable things I learned from this video. 2) figure 8 fasteners and most valuable # 1) stain the bottom shelf first and if I like it, then proceed with the rest. Excellent advise.
Excellent demonstration & great teaching skills .Im going to make this table with your instructions.. Thanks for sharing & Im watching from Trinidad & Tobago in the Caribbean
This thing looks super sturdy and like it’ll remain square forever. Solid build man. Thank you for the video and instructions along with the build specs. Subbed and notifications on for sure.
Thanks Kyle! The K4 is seriously GREAT and so efficient! Not sure if HD has the dowel jib but there's a link in the description for the one in the video... any doweling jig will do though!
It's a project panel that's pre-glued. Here's a link to what I used www.lowes.com/pd/Metrie-16-in-x-6-ft-Smooth-Natural-Spruce-Wood-Wall-Panel/1001306090?cm_mmc=shp-_-c-_-prd-_-mlw-_-google-_-lia-_-122-_-edgegluedpanels-_-1001306090-_-0&placeholder=null&ds_rl=1286981&gclid=Cj0KCQjwm9yJBhDTARIsABKIcGYnK2-5BbYNEJZCyJHLHlO_NnShVEjYNVizgp8O53g4zhCnghHhqocaAvZYEALw_wcB&gclsrc=aw.ds
Awesome job , have a question can you tell me what kind of screws do you used to me the first two frames i know they are 2'' pocket screws but what kind cus I am having a hard time trying to screw them and i bought kreg pocket screws thanks.
Hey Diego! The brand I use is Grip Rite exterior screws, but pocket hole screws should actually be better. I just use the Grip Rite ones because they're cheaper in bulk.
Thanks! So the washers will allow for wood movement as the top expands and contracts over time. By putting a screw in each end of the washer, the top will be held downward by the force of the screws - but as that top does expand and contract, the washers can pivot in the direction of the expansion/contraction, which allows the top to do so without stressing the internal wood causing the top to crack. I’ll try to do a video in more detail about this and some other table top attachment methods when I get some time.
Beautiful console. Watching you was such a pleasure Thank you
Thanks for watching and the feedback!
What I like best about this video is that you did not insult viewers by playing sappy stupid music while you built it. So many videos now days that proclaim to be how-to videos are really just ego trips for people who play sappy music while we watch. Nothing how-to about it. But yours was great. Thanks for sharing the detail, it is so very helpful. Your table came out great.
Thanks Jack! Exactly what I was going for with this tutorial style video 👍🏻
I totally agree. It is exactly what I was looking for. He showed how he built it, and provided tips along the way to be more efficient at building the table.
Half lap is the best way to do the X. Nice informative video.
Thanks Pat! My next video (this Sunday) is a detailed version of the half lap joint, keep an eye out!
Two valuable things I learned from this video. 2) figure 8 fasteners and most valuable # 1) stain the bottom shelf first and if I like it, then proceed with the rest. Excellent advise.
Thanks for the feedback and sharing! 👍🏻
Excellent demonstration & great teaching skills .Im going to make this table with your instructions.. Thanks for sharing & Im watching from Trinidad & Tobago in the Caribbean
Thanks! Good luck with the build!
Great Build Video! A nice change from all the cookie cutter woodworking content creators!
Thanks Chris!
I love this SO much! 😍👍🏽💜 I just asked my husband if he can make me one and he said ‘yeah’…….yesss!! 👍🏽👍🏽😁
Nice! Enjoy the build and hopefully it turns out great!
Nice build.
Thanks!
I've watched so many videos and this one is my favorite. Thank you for being specific!!!
Awesome, thanks Mely! Glad you found it helpful!
Man I really like your work. Its so authentic. Much love from Kenya Africa.
Appreciate the kind words George! Thanks for watching!
I really like this. I’m going to make one! Thank you for the video and instructions.
Awesome, good luck with your build! 👍🏻
Just found this video. Nicely done.
Thanks Harvey!
Awesome! Thanks for the step-by-step instructions on this!!
Thanks for watching and for the feedback!
This thing looks super sturdy and like it’ll remain square forever. Solid build man. Thank you for the video and instructions along with the build specs. Subbed and notifications on for sure.
Thank you! Appreciate the feedback!
Nice build, excellent directions as well.
Thank you!
Love the way you made this video
Thanks Nick!
Beautiful I love it!!! Wish I knew how to build one
Thanks Kelly!
You can do it!!! If my dumbass can than anyone can
Great job and great project thx for sharing enjoyed it
Thanks Larry!
Turned out really nice 👍
Thanks J Fred!! 🙏
Great job! I just subscribed. Looking forward to future builds.
Thanks buddy! Stay tuned, more to come!
Awesome build
Thanks Jim!
Fantastico! Grazie mille 😘
Thanks! 👍🏻
So pretty 😍💗
Thanks Karim! This one was one of my favorites!
I can't get a straight 2x2 to save my life, they are all twisted! I never have straight boards!
It can be tough to find decent ones, I feel like I’ve dug through half the stack at the store before to find the best ones 😆
Awesome build bro! Just redid our family room Farmhouse style n been lookin for a console table build. I’ve found it! Subscribe! 👍🏽
Thanks T Ro! Good luck with the build!
Damn that looks good! You did Great. Isn't the kreg jig tbe best thing ever? Lol. I need to get that dowelling jig. Do you know if HD sells those?
Thanks Kyle! The K4 is seriously GREAT and so efficient! Not sure if HD has the dowel jib but there's a link in the description for the one in the video... any doweling jig will do though!
Nice entry table mr Matt can you please tell me where can i get the 1x16x6 board that you used on this table ? Thanks.
It's a project panel that's pre-glued. Here's a link to what I used
www.lowes.com/pd/Metrie-16-in-x-6-ft-Smooth-Natural-Spruce-Wood-Wall-Panel/1001306090?cm_mmc=shp-_-c-_-prd-_-mlw-_-google-_-lia-_-122-_-edgegluedpanels-_-1001306090-_-0&placeholder=null&ds_rl=1286981&gclid=Cj0KCQjwm9yJBhDTARIsABKIcGYnK2-5BbYNEJZCyJHLHlO_NnShVEjYNVizgp8O53g4zhCnghHhqocaAvZYEALw_wcB&gclsrc=aw.ds
Awesome job , have a question can you tell me what kind of screws do you used to me the first two frames i know they are 2'' pocket screws but what kind cus I am having a hard time trying to screw them and i bought kreg pocket screws thanks.
Hey Diego! The brand I use is Grip Rite exterior screws, but pocket hole screws should actually be better. I just use the Grip Rite ones because they're cheaper in bulk.
Thanks a lot partner will consider that and keep uploading those amazing videos I am a really fan of your projects 👋 from El Paso Tx👊
@@diegomoreno2070 You're welcome and thanks for watching!
Great project! It irks me that the wood was wrapped in plastic, though!
Thanks Dave! I know - I'm with you, the project panels are always like that!
👏👏👏👏
Thanks Diego!
Super built just not clear with washers that you are using , alittle to fast video for me at this point
Thanks! So the washers will allow for wood movement as the top expands and contracts over time. By putting a screw in each end of the washer, the top will be held downward by the force of the screws - but as that top does expand and contract, the washers can pivot in the direction of the expansion/contraction, which allows the top to do so without stressing the internal wood causing the top to crack. I’ll try to do a video in more detail about this and some other table top attachment methods when I get some time.