Flywoo FlyLens 75 Review! Super Fun, Compact, Lightweight 1.6'' FPV Drone!
HTML-код
- Опубликовано: 28 дек 2023
- Thank you for watching! If you enjoyed the video, please like and subscribe for more! If you want your own Flylens 75 HD, please visit the affiliate links below. If you purchase from these links I earn a small commission. Appreciate the support!
---
FLYWOO FLYLENS 75 HD
O3 AU / O3 AU LITE
flywoo.net/products/flylens-7...
DRONE KIT HD (NO O3 VTX)
flywoo.net/products/flylens-7...
ANALOG
flywoo.net/products/flylens-7...
HDZERO
flywoo.net/products/flylens-7...
WALKSNAIL BNF
flywoo.net/products/flylens-7...
Flywoo DJI O3 Air Unit Filters Set (7PCS) - ND CPL UV
flywoofpv.myshopline.com/prod...
550mah 2s HV Lipo
flywoo.net/products/2pcs-expl...
750mah 2S HV Lipo
flywoo.net/products/explorer-...
1000mah 2S HV Lipo
flywoo.net/products/2pcs-expl...
Notes: I apologize about the audio quality. I made a habit of filming with my phone now but I realized the audio is not good enough. I just bought dedicated iPhone mic now 👍
@flywoofpv 
Хобби
![☀ Самый маленький дрон с DJI O3. Камера + 4 мотора. [Flywoo FlyLens 85 2S]](/img/1.gif)
Great close to the ground flying.
Fantastic review! I appreciate all the detail you put into the build. Helps me a lot to understand the in and outs of this system. I picked one up soon as I learned about it and have been feasting on Lensfly75 reviews and yours was the one I enjoyed the most. Love your frame designs as well! I’ll be picking up the 5” soon. Outstanding work on both your design and video production.
Thank you for all the kind comments. Really happy to hear you enjoyed my review the most too. Looking forward to your order! 🙏🙏🙏
The frame is aluminum, those lines are just from them using a roughing mill to cut the frame out of sheet.
What a great little quad! Nice review PF! 👌👍
Thank you! 🎉
Very nice 😊
Thank you! It is fun! 😊
Hey broth, I really like Your video, thanks a lot, Im already testing ok my indoor flying with Airmode Off and tiene helps me a lot. Bless
Yes it does! Thank you for watching and happy flying!
Awesome mate. I just uploaded my first flight with it too in my channel
Sick dude. I’m having trouble with my RUclips mobile to go into your profile. Please put the link here I’ll watch it
Nice Video, There are two ports one on the top like you said for Betaflight and the one on the Bottom for DJI updates? Do you have a video on how to set up the Betaflight on it? Would really appreciate it, I am more of a DJI guy. Thanks
Hi, actually betaflight is pre installed on the flight controller. You just need to download the free program online, plug in your drone and hit connect. Most of it’s already set up if you get the built kit , you just need to connect your transmitter. There’s a bunch of videos out there on how to do it.
Great review and beautiful footage, is that QE park? 🎉
Thank you. No it’s Riverview park near sw marine drive :)
Thanks for the review. Nice gap flying! Would this drone work with my dji controller 2? Thanks!
Thanks! Yes it should. Purchase the O3 au version as BNF-DJI on the flywoo website.
Thank You!
How do you adjust throttle to fly indoor for real estate. Would you recommend the Firefly 1.6'' Hex Nano HD DJI Wsap V1.2 Micro Drone for indoor and mount a camera like a go pro on it?
Hi, no I don’t recommend firefly hex nano for indoor use. Check out this video it talks about throttle scale and shows the exact drone I use for indoor work. It uses a naked GoPro from flywoo. Geprc also sells naked GoPros too. Cinewhoop Betaflight Settings for Real Estate Fly Through Videos Tutorial | FPV Drones
ruclips.net/video/MK0i2Rd3B94/видео.html
What controller are you using and is it connected to elrs ? ? Also would it pair with DJI goggles integra or another version ?
Also I saw you on the fly woo too the 75 I have been looking at that with 03 with DJI controller as an into to fly inside.
@mybeachhouseguyfl I use tbs tango 2 controller and it pairs with tbs rx nano receiver. There are other systems yes such as elrs, ppl are having great results with those too. I would stay away from the DJI controller. Standalone receiver and controller is a better way to go.
@@mybeachhouseguyflYeah the flylens 75 is a good choice for mixed use indoor and outdoor use. If you do get one, throttle scale is necessary indoor, and I would find a way to secure the camera vibration dampener plate either by screw and nut, or zip tie. If you crash very hard, the camera plate (that has the silicone bobbins) can come right off the quad and its a bit of a pain to put back on! Keep us all updated how it goes
Why this wire antenna on the back if the signal receiver could be an o3 system with two antennas on the drone?
Hi, the extra antenna is for a dedicated receiver I use. It’s a crossfire nano rx by team black sheep and I pair it with my tbs tango 2 transmitter. It has superior range (paired with the correct antenna of course) and stick gimbal feel (higher resolution) compared to the DJI controller 2. Newer pilots choose to use the DJI controller 2 because of its ease of use to pair with the o3 au, but there are some huge downsides. For example if you lose connection to your goggles, you will momentarily also lose control of your DJI transmitter. Using a dedicated receiver won’t have this issue, you might me able to rescue your quad and fly it home without the vtx connection. 👍
@@PattyFlipz Is it possible to put a separate T receiver antenna with ERLS on this drone so that it works with DJI controller 2? Is there such a receiver? Or is it better to put a GPS so that the drone returns home if communication with o3 stops?
@user-oh6bn6os6u oh I don’t think elrs can work with DJI controller 2. Elrs will use other transmitters like radio master or even my tango2 with the correct modules installed. To my understanding DJI controller 2 only communicates with DJI products such as the air unit. Yes best to put a gps unit. Unfortunately I can’t remember the exact behaviour of a failsafe event with o3 au and DJI controller and gps unit. Maybe there’s some videos online.
@@PattyFlipz Thanks a lot! You have an excellent channel and a very interesting Video!👍👍👍
@user-oh6bn6os6u 🙏🙏🙏
Interesting brother, is it well equiped with capacitor by default?
Yes there is a small capacitor soldered to the aio
We should do all that work when buying? Soldering, etc?
Hi! No you don’t really need to. I only modified mine to fit my own system so I can fly it. I didn’t get to choose they just sent me what they had for review. If you choose the correct BNF system for your transmitter and goggles you shouldn’t need to solder anything. All you need to do is do some set up work through the computer etc.
@@PattyFlipz im struggeling bind it to my radiomaster tx16 elrs. Can you please share the betaflight configuration
Oh sorry I don’t have that info.. email me at info@protofpv.com I’ll forward it to my friend to help you with some troubleshooting.
Thanks mate but solved it already. One question, how the tpu mount is not seen in the camera? Mine is seen in the camera @@PattyFlipz
@ALEFA-ID you are using o3? Change it to WIDE mode and I think you shouldn’t be able to see it.
I have a ton of 850 batteries will they fit one of the mounts?
Probably not. They fit very snug to the specified batteries. You will probably need to make a custom one and print it.
@@PattyFlipz thanks
Please send me the antenna model🙏
For the minimortal-T? I just used a zip tie actually I never ended up designing anything 😂🥲