Unfortunately transmission are on back order for my girlfriends 2016 Elantra, but as soon as it gets here I’ll be tackling this myself. Thank you for the details video, it will be an IMMENSE help for me and I’m sure plenty of others. Apparently these transmissions don’t last too long.
A new motor then the transmission goes bad , hyundai most definitely ruined the original transmission during the engine swap ...my opinion but running a motor out of oil has ZERO baring on a transmission failing unless your pushing a almost fully seized motor, and causing strain on the transmission.
So much easier to remove your cv axles by taking the two lower bolts out of the strut and then folding the knuckle out. No need to mess around with ball joints! I just did a Hyundai Kona tranny swap this week that way.
My wife Elantra just started with the same problem and same noise, I consider myself a skill mechanic person but now with your video definitely I will do this job, now hopefully I find a good deal, thank you brother good video 👌👍
Thanks for putting this video out! My son in law has a 2016 Hyundai ELANTRA, which we believe is in need of a new transmission and we plan on replacing it ourselves to avoid getting bent over at the transmission shop. Your video is very insightful. Thanks again!
My trans just went bad on my Hyundai Accent this is giving me hope I can possibly do it myself. My dad was a mechanic for many years now retired so he’s got the tools necessary. I’d hate to junk my car to many memories made with it
Overall, great video. Very helpful. Nice job showing where bolts are and their sizing. Only a little critique....The mounts were not explained how to remove, neither the flyheel or starter. You showed the install, just not the removal. You got 90% of it covered, just a couple of small things. Where did you find the replacement? Thanks again for posting.
Young man, you are awesome, very good job. I’ve seen other “ mechanics “ perform the same job at a shop with all the tools and sophisticated equipment and have 1-3 guys helping. It’s only you NICE 👍🏽… Thank you for the feedback..
Great vid.! Just had to do the same thing on MY daughter's car. Not the same symptoms, though. She ended up plowing the inside, vertical curb face of a round-a-bout. When picking the car up from the scene of the umfortimate event, I noticed the fluid on the ground & thought it was maybe a busted fitting or a line that was frayed. Got it home & started to assess, & noticed a busted pan. No big deal, right? Wrong! Pulled the pan & a small section of the case came with it. So a tranny R & R was clearly in my future. Your coverage of the job was excellent! No essential items were missed & no redundancies. U seem like a super cool fella.🤘
i just completely broke my tansmission you know something broke when you hear a snapping sound so once i get the tranny going to use your very helpful guide to replace it thank you for this
Thanks for showing how to do this and thanks for Your hard work on this Transmission Job.👍✌.I'm sure Your Daughter was very greatful for doing this for Her.Thanks.
First and last Hyundai for me. Thanks for making this video. My transmission is fine but I will have to change my clutch soon.
Unfortunately transmission are on back order for my girlfriends 2016 Elantra, but as soon as it gets here I’ll be tackling this myself. Thank you for the details video, it will be an IMMENSE help for me and I’m sure plenty of others. Apparently these transmissions don’t last too long.
A new motor then the transmission goes bad , hyundai most definitely ruined the original transmission during the engine swap ...my opinion but running a motor out of oil has ZERO baring on a transmission failing unless your pushing a almost fully seized motor, and causing strain on the transmission.
So much easier to remove your cv axles by taking the two lower bolts out of the strut and then folding the knuckle out. No need to mess around with ball joints! I just did a Hyundai Kona tranny swap this week that way.
My wife Elantra just started with the same problem and same noise, I consider myself a skill mechanic person but now with your video definitely I will do this job, now hopefully I find a good deal, thank you brother good video 👌👍
Thanks for putting this video out! My son in law has a 2016 Hyundai ELANTRA, which we believe is in need of a new transmission and we plan on replacing it ourselves to avoid getting bent over at the transmission shop. Your video is very insightful. Thanks again!
Cheers to you for making this video. Easily saved me 3 grand. Thank you!
My trans just went bad on my Hyundai Accent this is giving me hope I can possibly do it myself. My dad was a mechanic for many years now retired so he’s got the tools necessary. I’d hate to junk my car to many memories made with it
Overall, great video. Very helpful. Nice job showing where bolts are and their sizing. Only a little critique....The mounts were not explained how to remove, neither the flyheel or starter. You showed the install, just not the removal. You got 90% of it covered, just a couple of small things. Where did you find the replacement? Thanks again for posting.
Young man, you are awesome, very good job. I’ve seen other “ mechanics “ perform the same job at a shop with all the tools and sophisticated equipment and have 1-3 guys helping. It’s only you NICE 👍🏽… Thank you for the feedback..
Excellent video - straight to the point and not a lot of useless chatter. Good camera shots. Much appreciated!
Great vid.! Just had to do the same thing on MY daughter's car. Not the same symptoms, though. She ended up plowing the inside, vertical curb face of a round-a-bout. When picking the car up from the scene of the umfortimate event, I noticed the fluid on the ground & thought it was maybe a busted fitting or a line that was frayed. Got it home & started to assess, & noticed a busted pan. No big deal, right? Wrong! Pulled the pan & a small section of the case came with it. So a tranny R & R was clearly in my future. Your coverage of the job was excellent! No essential items were missed & no redundancies. U seem like a super cool fella.🤘
Great video, really appreciate you taking the time to show bolts list sizes and remind helpful hints during the process. Thank you!
Successfully completed ✔️ the process was so much easier after this video! Transmission replaced and working great.
Stellar job. I'm not sure I would have tackled that repair but after looking at how you accomplished it you make it look easy.......👍🏼👍🏼
i just completely broke my tansmission you know something broke when you hear a snapping sound so once i get the tranny going to use your very helpful guide to replace it thank you for this
Love this. straight to the point. thank you so much. i needed this to take down my transmission to change the clutches ect...
Thanks for showing how to do this and thanks for Your hard work on this Transmission Job.👍✌.I'm sure Your Daughter was very greatful for doing this for Her.Thanks.
Great job you should do this all the time. I like the way you keep everything neat and safe.
You just got yourself another big thumbs up for sharing this video. Thank you and well done from Niagara Falls Canada.!