How To Use NCS Expert To Code Any Car Full Walkthrough And Detailed Guide
HTML-код
- Опубликовано: 4 фев 2019
- THIS VIDEO IS GOING TO SHOW YOU HOW TO CODE AND USE NCS EXPERT AND HOW TO BECOME A PRO AT CODING DIFFERENT OPTIONS INTO YOUR CAR FOLLOW EACH STEP TO SUCCESS
#NCSEXPERT #BMWCODING #BMW 
Авто/Мото
Top vid fella, thanks for sharing 👍👍
Dean, I’m new to all this as I was used to using vcds on vw cars what would be the best too in English to code optional extras like drls coming home lights etc
Thanks Dean, thanks for sharing mate. I've just one question. I have a 95 740iL and would like to code the HKM module to allow the hydraulic boot system to recognize and to operate from the kick panel boot release switch and also from the key fob boot unlock button. Any suggestions on how to accomplish this with NCS Expert are greatly appreciated. Thank you ever so much again.
Thanks Dean. I was waiting for this video. Just as promised. Thanks mate
Exactly mate stay tuned more coming mate for you on every bit of the software
My trans went out in my 2007 bmw x3 so I pulled one from a doner car now egs is not communicating. I think it is still linked to the old doner car. How would mate egs module to me vin?
Hi dean could you please guide me through on how to recode a second hand ccc head unit in my car? my stock head unit was playing up so i had to buy a second hand unit of the wreckers. plugged in worked as it should but there wasn’t any sound or chimes! replugged the stock one and the chimes worked. so it wasnt a fuse issue. i just purchased ncs expert but i need a guide through please mate! it would be greatly appreciated!
Will coding out features like TPMS or Adaptive Headlamps be over written when updating ECU or other modules?
Can't wait to see more
I had p problem with my EWS and had to change the DME. Can I use this to change the VIN? The vin is different and the mileage is way off in Ista.
Hi Dean , nice vid i have done a conversion from air bag to coil springs on an X5 4.4 v8 but battling with the message on the dash air susp inactive.
I been trying to code it with nsc expert but battling as its all in german
Question
I didnt have on my bmw e46 bc button on left side, so i installed it but now i need to code it, where in NCSExpert i can find where to activate BC button from there and see if it works ? What modue does that bc button belong inside ncsexpert ?
Thx in advance
Thank you for you video! Can you help me to perform an Adaptive headlight remove? From VO I don’t have any idea of have to do it!
Hi Dean, do you reckon the battery voltage particularly matters?
Hi DEan, Can I flash an EGS for a 2004 bmw E60 530i from NCS EXPERT? I am changing my EGS with a used EGS from a different car?
Thanks to much.
Can you help on bmv x3,I wont to replace light module because is foulty.my module is bmv 3413320,and I google there are 3 replacement,3448668or 3420785or 3413320.
Do I need to code them or plug and play?
Looks so complicated. I still wouldn't have the confidence to use it on my carvas I am afraid I still have not enough knowledge. Hopefully we will see more content. Would love to see how you coded off the cats on Nathand 530i. Much appreciated for taking your time to go into this detail
It is actually very idiot proof. It will not allow you to write a malformed file.
Why in my ncs dummy can I not select active or not active when I open the trace folder? If I open the man folder I can select them.
I’m trying to program my ekp and it says ekp 6.0_2 and when I go to dummy there is no ekp in the drop down just ek928 and 9282. Cxx the x’s representing various numbers
I know it’s a old video and you probably won’t answer . Im having issues with my retrofitted xenon assemblies and don’t know how to code them to the system. I would need to code the parking lights and low beams to led/xenon so do you have a walkthrough on how to code them with ncs expert?
Hey, downloaded the SP Daten for F25. Installed it, but it doesn't show up under Chassis. ?
You helped me so much thank you
Good work on all your vids Dean, long time BMW owner just getting into coding now. Done a few bits following your guides, thankyou for that.. struggling with something you may know answer to tho:
I've fitted android head unit to my 2008 E60 LCI, working great. Trying to disable the OEM voice control (ccc system) but can't seem to do it.
I've removed VO $620 and FA_Write to CAS and LMA (factory config - expert profile). then default code CAPPL. marked multiple SVS coding options as nicht_aktiv and coded these with manipulation profile.
I've read that the MULF option SVS_EIN_AUS should turn it off also. But I can't read this module (2ULF / ULF2MOST.C11) - NCS expert throws an error in german. Can't read or write to the module either.
Any help at all would be appreciated cheers mate!
hello I would like to know the procedure following a short circuit of the pilot light, I cannot find any video with ncs expert.
So if my only options I have to load profile is default profile and NCS Dummy witch one do I push if I don’t have everything you have.
Dean can I use ncs expert to disable egr on my car or can that be done?
I'm having the worse time ever, I replaced my ccc as well as AMP and the vins don't match. Is there any simple solution to just changing the vins?
Bonjour je viens d'installer le régulateur de vitesse sur ma BMW e87 de 2006 comment faire l'ajout du code $540 avec ncs expert s'il vous plaît merci par avance.
Hello I just installed the cruise control on my BMW e87 from 2006 how to add the code $ 540 with ncs expert please thank you in advance
You can either plug ncs in or get 3D printed tiny piece to go on the buttons
Hello Doctor
I am overdue mot inspection (yellow car and exlamation mark sign) but my idrive is dead so i can not due it vua idrive.
Can you help me with somce codding which will disable that error od the dash ?
Thank you in advance
very clean
A video on how to code xenon lights on e60 non facelift conversion from halogen please!
Do these values work just the same for e38?
New sub, 00 323i sedan... enjoying videos, how can I obtain proper programming to code battery and gm5!!! Appreciated in advance
Dean,
Can i also code the locking and unlockin car beep sound?
Hey Boss how to code out ibs sensor as you told in one of videos you gonna show. Please dude
So how do you do if you dont have that profile you select in the beginning!? Fail directly in the video.
hi i need a lil bit help to code my logic 7, and also my blinkers acting wierd....pleasee somebody could help me?
Can you do a video on how to flash apple carplay on any BMW please
Hi Dean is it possible to delete the sap with this system? I have a 1999 bmw 323i and would like to delete the SAP system but i read that you have to have the dme rewritten sort of speak so engine light doesn't come on. if so where would I find the wright coding to turn it off I guess. I have all these bmw software ncs expert and more
delete it with rom raider
Hello, can I remove faults from kombi through ncs exper when certain ecu is not present in the car? For example if I want to delete ABG faults from cluster when all airbags ant it's module is removed from vehicle? E90
I am not an expert but reading up on fault code removal most people use Tool 32 👍 hope that helps
Bros like “you probably won’t have these profiles. But click this one. The one you don’t have and is very hard to source”😂
And of you install anything from another car you can write you car vin on it like a the kombi
What is SG RESET ? Can I choose SG RESET to back TCUM factory ?
Good that you mention "don't proces car"
Will this work for mini r60
South London in the house 👍
North london mate
I have only manipulation and factory mode .. ?
BMW owners who want to get serious: you're gonna need Dean's help to get this right...dont question, he knows what you need, and you'll need what he tells you. Good luck to you all, and thank you Dean for all you've done for me so far
Where can I download ncs expert or buy a hard copy?
Can i use another FSW PSW TRC file on my car. I miss Bluetooth en Welkom Light on my TRC file. I found one TRC file on internet with same Option my car.
Your asking me mate like I’m a expert, the guy that owns this channel is gone I’m running it now
So if you got any coding error you can reset to factory
How can I get this I'm new to all of this thanks
Hi Dean, why is it that everytime I try to use NCS expert it always displays an extra digit on the end of my VIN, everything else matches except it has the extra digit which in this case happens to be no.8, and I cant get rid of it,
it's suppose to be that way.
After you clicked excute job what program did you go too read the file
You will need to become a member to find it all out properly all these kind of videos and all others regarding programming is all on membership and all fully screen recorded
ruclips.net/channel/UCVC3s1g57DoBMNOk_al1CVQjoin
Expert package only
Hey!!
What should i do if my chassis gets read but i get FA-Fehler when i want to proceed?
you need to type in BOX.....Where is My Brain.exe
BMW Doctor i dont quite understand what you are trying to say.
After i load profile “Revort’s NCS Expert Profile” i click in the nex order: Start-> Chassis-> E89(E91)-> CAS and after that it reads my VIN just fine but when it should read my FA it shows an error quoted: “COAPI-2021:Datenuebertragung zum SG gestoert IFH-0010:” and same stuff for 3more lines.
I have a feeling that this car was coded before and someone mest up something or maybe some modules were reinstaled and they dont match with the VIN. Is the anything i can do or did you have any simmilar problem. At this point i dont know how to proceed and without correct FA reading i cant proceed to “Codierdaten_lessen” because i wont exetute the job “codierdn fail” and with that i cant do anything with ncs dummy.
Thank you for your help and looking forward to solve this if even possible.
@@remarca1308 have you solved your problem? I have exact same thing and I dont know what to do
How to code dsc module
Interested in a Collab for your Channel? Im not really a streamer but ive got an interesting product. 2016 550i, was driven into a pond. :D
Good afternoon, I'm Diego from Argentina, I have a BMW AND MINI workshop and I wanted to make a technical consultation, you will have an email please thank you
thanks dean awesome
no problem man stay tuned for a lot more on the software and how to use
Where can I get the files all I have is dummy
MY MEMBERSHIP
This is not easy to do. Especially when it’s in German.
In my case error appears FA $820
RUN FOR YOUR LIFE IS THATS COMING UP !!!!
You have just codes for the car to go into LIMP mode
@@BMWDoctor I want to change the amperage of the original 90ah battery to 110ah but I can't. When on ncsexpert expertmode I make F1 F3 error FA $ 820 appears
🤥🤥🤥🤥🤥🙄🙄🙄
VERY NICE 👍
@@BMWDoctor how do I clear the error and get to code the new battery?
I don’t know what you done to cause this error
Why are you following my videos ???? Have you not realised I don’t make my videos clear and I cut out most of the parts to stop people following I don’t think you have read the comments I tell everyone the same
I know you want to be like me but you can’t unfortunately I’m pro at what I do but I won’t let others follow 😁
I’m here to say look what I can do but you can’t do it haha
Brother if you want good software and to get full explanation and proper support become a member on my membership and I will help you become expert member I have loads of videos on there full detailed fully screen recorded
Exclusive for members good videos are not made public I only post all the s**t on here as these people are not paying me therefore they don’t deserve good quality videos
If you want quality here is the link go see the difference ONLY EXPERT MEMBERS
ruclips.net/channel/UCVC3s1g57DoBMNOk_al1CVQjoin