Buick Enclave power steering pump replacement
HTML-код
- Опубликовано: 18 окт 2024
- Power steering pump replacement Buick Enclave, Chevy Traverse, GMC Acadia, Saturn Outlook
Pulley remover/installer: amzn.to/2QBGvzm
Amazon Links to my commonly used tools:
My test light: amzn.to/2VCYpak
My scan tool: amzn.to/3JCxrD2
My little scan tool: amzn.to/3H2bWtt
TPMS scan tool: amzn.to/35aYLJN
Tire Machines: amzn.to/2R4mYu6
Torx Socket Set: amzn.to/3By4pSa
Hub Buster: amzn.to/3sXGBU5
Torque Wrench: amzn.to/3scOMg9
Bench Vice: amzn.to/3sTtDXf
Plastic trim tool set: amzn.to/3v3Xy1t
LED magnetic light: amzn.to/3p1q00t
MUST HAVE for coolant work https: amzn.to/3oYinI8
Thank you for taking the time to do a very good video, it was very clear, insightful and professional. 👍🏼
God bless You.
Thanks for the kind words!
Agreed Leopoldo, most are very hard to follow and don't list the tools and techniques used. I might actually be able to get mine done after watching this 🤞
Haha! Not only a Wizard at Auto Repair... also of Rubic’s Cube... who knew! 😂👍
Thanks. Very Educational. You made it look easier than a Chilton manual says it is. Still, without a lift this would be a booger!
El mejor video Para este muy complicado servicio, he visto mas de 20 videos , sin duda este es el mejor.
You're a Rock, the best of the best video, thanks to share.
Thank you!
This was just what I needed. Thank you.
Thank you for this beautiful video.
I become one of your followers ❤
Watch out for this guy! Last time he messed up my dots on my fuzzy dice I had hanging from my rear view mirror! 🤪
😎
Fastest way for you people. I just did it. Support motor
Take front passenger wheel off, Undo belt off power steering pump, take off inner& outer tie rod as one piece, take brake caliper off and hang it up, take out passenger side axle, undo the motor mount and take it out (easy I promise), raise engine slightly and undo the two bolts on pump and it’s out. 2 hours or so in and out.
does it make a difference on AWD drive models as opposed to just FWD ?
I had a shop quote me two prices
when you raise the motor did you losen any cradle bolts ?
Nice work.
Thanks!
Pro tip, get the power steering pump loose in the car. While it is loose in the car remove the pulley, you will be able to move the pulley out on its own and then the pump unit. Put back in same order, you will not have to move down any of the engine cradle.
Wow great advice to get it out easy but I will still drop cradle it only takes 5 min and will make job much easier :)
Have you used this technique? How hard is it to get the puller/installer on the puller with the pump mounted on the engine?
Wont clear the frame to put the installer in
@@Denton-su6gy remove the pump from the engine first, so it is loose in the engine bay, then the pulley remover should fit, at least mine did.
Yea i understand that
que tal gracias por el video es muy bueno, tengo problema cambie la bomba de dirección, pero la manguera de baja se rompe por la presión ( de 130 a 145 psi) cual será la cusa ?
Hello, hey I have a 2012 Chevy Traverse LT trying to put the power steering pump on and I'm having the trouble that when I drop the subframe on the passenger side it's only going down two of the four in required to pull the power steering pump. Can you think of anything I could have done wrong?
ty man
Yw man
Thanks for the video. Is the power steering failure a common problem on Buick enclave 2015,? Thanks for your answer.
I would also like to know the Answer to this Question. Thank you Bobby
Seems like it. Close to 100,000 on mine & it’s going.
these suv's are the WORST !!
Great video, just curious was the pump replaced because it was leaking or was it actually have mechanical failure? I have a 2015 and noticed a leak starting on my floor, then my power steering started whining. My reservoir was bone dry, whine went away but thinking about how long I have before I need to replace the pump. You make it look easy, but I know it’s not.
I just had to do one today on a 14 Enclave. I used dye in the fluid to find the leak. This one was leaking from the shaft seal where the pulley is. Hope maybe this will help!
did you inspect the lines ?
So strange ? I have a friend that has one of these someone replaced her pump and lost the bottom bolt does anyone no what size bolt it takes I'm having problems finding one
You made this look way too easy
TIP:
Remove the right side tie rod from the spindle and it will save you having to Rubics Cube the pump out.
How long did that job take you to do? Also what does a job like that costs in labor?
@K Tull and to think i charge my friend to do hers awd a miserable 225 dollars labor yikes i way undercharged her 😲
I had the steering wheel line and pump replaced at Buick dealership and it cost 1436.00 and don't forget military discount
@@kb95dream wow that is super expensive holy crap
Ouch!
@@Tomsfoolery. is the procedure same for AWD ?
What was the indications the pump was bad?
Whining noise and\or occasionally slight loss in power steering assist
I need to know what do i need to do if the belt is loose
Replace the tensioner pulley
Lololololol nice job!
This the same for a saturn vue 2008
Ok just replace power steering pump but now steering wheel just moves in effort less n the wheels don't turn
haha wtf 🤷♂️
Forgot to belt on ???