DD15 No Start/dd15 no start after fuel filter change/dd15 wont start/turn but no crank/no start
HTML-код
- Опубликовано: 20 июл 2019
- New Shop Info: goo.gl/maps/HzwG98iioszjQWRP6
TAT Express Inc.
972-225-3017
4140 Langdon Rd.
Dallas TX 75241
DD15 No Start is a common issue we see in our shop. We usually see this after a maintenance where the DD15 was not primed and purged correctly using a Detroit approved priming tool. 2 minutes with the priming tool is what is recommended by Detroit.
If this video has helped you in anyway show your appreciation by buying me a coffee ☕️
Cash App:$tatexpress
If you have any questions feel free to reach out to us at
info@tatexpressinc.com
New Shop Info: goo.gl/maps/HzwG98iioszjQWRP6
TAT Express Inc.
972-225-3017
4140 Langdon Rd.
Dallas TX 752411
Join our Facebook group
/ 2517634715134383
Check us out on Facebook
/ tatexpressinc
~-~~-~~~-~~-~
Please watch: "TAT Express Live With Francisco Amaya"
• TAT Express Live With ...
~-~~-~~~-~~-~ 
Хобби
Im so glad to see you and your new shop doing so great. I just get aggravated watching these old school guys and mechanics still trying to repair these modern space age machines without reading the manual or using the correct factory auth tools. Kudos to yo young man. Have a pleasant day in Texas. Bill
I prime mine by the little pump When I change my 3 filters I fill up the big middle filter housing with diesel put back on housing tighten down I then open the cap on the water fuel separator housing I pour fuel into there about 3/4 full and pump away you can see the fuel go down in the separator bowl I do this while I’m changing my oil and over 30 mins I pump and refill separator bowl pump fill pump fill and 95% of the time it fires right up or spins over less than a minute and fires up I don’t have the tool but this purges mine pretty good. Last shop that did mine when I picked it up it wouldn’t start until constant spinning over and over for 10 mins that’s why I do my own now
We use a 12v inline electric fuel pump we put one end in the tank clip the other on the port and just have a set of alligator clips we hook to the closest power and earth.. works great.. also use it for series 60 with an adaptor
I like your videos, they are very informative
Keep up the great work
Thank you for watching Dominic. Its pretty tough at times trying to make videos since I am always strapped with time but I have to keep pushing these videos out. If you haven't subscribed yet I would really appreciate it.
God bless you man
Outstanding very good video sir! I didn't know about a Detroit approved primer pump!
Thanks 👍
Excellent information..
Excelente video amigo gracias
Gracias por ver
Great video
Thnx for useful infor bro
Thank you for watching and be sure to hit that sub button
awesome videos
Thanks...........
You're welcome! Thanks for watching and thank you for the support. Make sure to subscribe and turn on notifications.
nice and good time
Thanks for watching and thank you for the support. Make sure to subscribe and turn on notifications.
Great video's
What about the waterseoaretor if i change same time when the fuel filter
Do i need fill up with diesel or the primer takes care of it
Yes mr. Adam why 2016 not DD13 engine to explore and what to care and watch out in the future thank my men
I boought that primer
My question if i put deisel fuel on it do i need filter or when i am priming the fuel goes in fillter and over there gonna be filtered? Thanks
That a vital information man thanks, by the way, if you May have any information how to get that primer pump it will be very appreciated
Thanks for watching and thank you for the support. Make sure to subscribe and turn on notifications.
Buy the fittings from parker goto home depot buy the small pump sprayer for 20 dollars. Attach parker fittings to pump hose pump up the pressure..done and dont have to spend 400 to 600 bucks for so called primer tool
I just buy one here is the part number J47912 made by otc cost 506$ with the tax
Gotta love that priming bottle. The one at my shop is always empty when you need it.
Damn ! I thought I was going to watch a video from T.I.T. Express
Can not priming correctly cause tanks to not equalize?
I have all my fuel going to the right tanks when I fuel on left tank
That pump spayer is not necessary when doing filter changes, but very helpful when doing top end repair involving injector removal. For the do it your self guys. Just fill the frame mounted filter all the way full and leave the cap loose. Before installing the small cap on the main filter or medium size cap for the earlier filter model, fill the main housing with fuel to the top of the little cap. Put the little cap on and start pumping. Pay attention to the level in the frame filter. When that level reduces to 1 inch above the big black nut thing, tighten the top cap nut. Start pumping agint 100 strokes. Then crank the engine for 10 seconds. If it doesn't start, pump another 100 strokes. Then it will start. If you can manage to do good clean work and pay attention to detail, I suggest you leave the main filter housing alone!
Shane Shane hi. Thank you so much for info re: priming a DD15 engine. I think I follow your advice, and I'm assuming you have had success with method you have described. Let me see if I understand you correctly:
you are saying refill the fuel system at the fuel/water separator tank (big, transparent one near front of engine) and using plunger-type hand pump at multi-filter fuel filter assembly beside fuel pump in order to prime fuel system after fuel system repair such as injector replacement. Is this correct Shane? And have you done this successfully? I appreciate your input, thank you.
My boss bought a damn air sandblaster and added a quick connector for the fuel primer
I change the fuel filters 2 days ago and still cranck couple of second and then start. I didn't used the prime pump! What can i do if that's continuous?
So anything i have to cares about?
Great video , I hope you can help me , I have a 2016 cascadia dd15 with 2 filters setup , just last week mechanic replace my fuel injector lines and do oil change , now my truck have a hard time starting every morning, I had to hand prime manually to get the track started, any ideas what is wrong thanks , and after a got it started in the morning it will start fine all day , just when it sit overnight it won’t start in the morning
Bring the truck and your wallet to a shop
I made my own from a sprayer. I have about 100 in it. Sure beats the price of the approved tool.
Hddm3. Just make sure air it not being pumped into system. Thanks for watching.
where do you get all other kits from ?
Already subscribed bro
Welcome. Thank you for the support.
What's the part number for that priming tool?
Thank Good explanation I want to know about tow stage valve on dd15
Jawoalia, an explanation on DD15 fuel system is a great topic. 🔧💪👊
Which one
The anti flow back valve is the plug to the right of and inline with the fuel inlet line, it takes a 1/4 inch hex key socket to remove.
How much that priming system u guys use
Can i have name to search for it
I did change oil at petro but they not doing a clean job i had to tell them to clean water separetor
Woo ok boss ✌✌✌👍🏻👍🏻
Many many thanks
cool cool...
I was having rough idle on my dd13 so had the quantity valve replaced but now truck won’t start ! I had it turned on with starter fluid and ran it a full day then turned off at end of day and will not start ! Any ideas what can be the problem ?
Check metal in fuel tank if any you may have fuel pump going bad very common on these dd engines,
I just changed my high pressure fuel pump I've purged and primed and still can't get it to start
Why my 2012 hard to start after a few days of sitting once it gets fuel it starts up cut it off it starts up easy
I use the pump every time I service my filters with no issues
What about the manual prime pump? I've gotten started with the manual pump. Is there for a reason
Orlan, sound like its losing its primp while sitting. Could be fuel lines, I would have the fuel system checked out.
The prime oump on the housing is there exactly for priming. You're correct. The way shown in this video is simply doing it way way quicker. Although is not a approved way. The manual pump via detroit also purges the air in the system while it primes. It's better for unit to use the manual pump. There is approved tools which detroit uses. It's called a furl ESOC. Not cheap but what is approved. Idk where he thought you were losing prime. But I've found the easiest way to lose prime is through your fuel water separator. Make sure it has a good seal. When changing the filter in it seems some forget to change the gasket or don't put a gasket back in at all. Bad move. You'll see no fuel in it meaning it's lost the prime somehow. If that has no fuel in it the truck most likely won't start. If it does only for a few moments. Gl. Any question I'm betting I can help.
Awesome content good dude. knows it amd easy to follow. PRO
Kurt Notorleva thanks for watching. Make sure to subscribe. 🔧🇺🇸🇨🇱👊🏼💪🏼
ở việt nam em thấy nhiều xe đầu kéo mỹ international prostar động cơ maxxforce 6 máy thẳng hàng và engine detroit dd15 và cummins isx15 chạy thì ok nhưng tắt máy rồi đề lại thì chậm nổ là bị thiếu dầu nè anh ơi
Điều đó rất thú vị để biết. Cảm ơn bạn đã chia sẻ
Truck !! 🚛🇺🇸
💪🔧👊
Podrías subir un video de cómo cambie los gaskets del manifold intake de 15 por favor
asegúrese de suscribirse
TAT Express Inc. ya lo hice
Quick Coupler with Female Pipe Thread what size ? 1/4"-18 NPTF Thread Size
Yes that is correct Peter. Thanks for watching
What about SAM CAB MODULE???
I have a question I'm hoping you have an answer for. So I had a mechanic replace the fuel filter on my 09 freighliner DD15. It has been updated to the 2 fuel filter system. After they replaced the fuel filter, it did not start. After they diagnosed the issue, the conclusion was the fuel module was the problem. My question is, are they at fault for the fuel module being damaged after fuel filter change or is that a common occurrence? Thanks in advance
Alex if you already updated to the 2 filter system it should not fail again. I would ensure the tech is troubleshooting correctly.
@@TATEXPRESSINC Thank you for your reply, I really appreciate it. The shop had to hire a Detroit diesel specialist to come and diagnose the problem. They said they could not find the issue and suspect the control module. But the truck started just fine when I brought it to shop. They change fuel filter Now it doesn't want to start. I'm wondering if they made a mistake with install that damaged module or if it something else. Lesson learned, when I'm near Hutchins I will take my truck for scheduled maintenance to you guys. Thanks again
No problem Alex thanks for watching. We have gotten calls for trucks not starting after filter change and we find filters not installed correctly or fuel system not primed before start up. What was the solution for your no start?
@@TATEXPRESSINC Its in the shop right now. the Detroit Diesel company the shop hired said they could not find the problem. So the only problem the specialist could speculate was the fuel control module. Now the shop is in the process of replacing it out now.
Alex, didn’t you say that module was just recently updated? If so it should not have failed. I hope they get you back on the road. Thanks for reaching out to us.
Yeah right
My truck loses prime ever time I shut it down .what's the problem
Where can i buy and how much a priming tool
hay lắm vì 2 min đó anh ơi, làm như vậy là ko có air nên đề là nổ liền, thanks for nhiều lắm
Tôi vui vì bạn thích nội dung
@@TATEXPRESSINC dạ, em cảm ơn anh nhiều lắm
my truck out no where isnt starting
just keep cranking
it starts with starting fluid but once i stop spraying it dies again.
there is no fuel coming through the filters at all
not sure if pump isnt working or something wrong with computer
any help ?
Did you fix it ? If so how? Thanks
@@chuasmare22 ya
had a leak in fuel line
changed fuel pump and crank sensor
but it was just a small leak
ended up changing all fuel lines just to be sure
runs good now
Looks like this video is for an actual mechanic and not the driver. Since my truck won’t start I’ll just pull the freightshaker approved priming pump, right?
Thanks for watching be sure to subscribe
What if there’s still air in the system after driving 500 miles?
Pray to Jesus
You have a hole in fuel system...
How much fuel does it take and how much pressure also?
Are you asking about priming pump? Thank you for watching.
Over 130 to 150 bar.
Detroit says to prime with 3 gal of fuel and psi should be between 70 and 95 depending on year of engine the 150 bar is min starting psi in the fuel rail
Where is ur shop bro?
What is part # for that priming pump/tool
Ulises Gonzalez thanks for watching. J-47912 is the part number for primer. 🔧🇺🇸👊🏼🇨🇱💪🏼
TAT Express Inc. j-47912
Hey, I ran out of fuel. I pumped the fuel primer pump. I pumped it more then 2000times. But it still wont start.
Luke, you would need a fuel primer like the one in the video. Also be sure that you have enough fuel in system and there are no leaks
I’m sorry but if they don’t say anything about using the primer that they put there and it’s not recommended…. Why did that put it there? 🧐
You may use it if you like. We are just advising from experience. Thank you for watching
Detroit Diesel calls for 2 gallons of fuel at 95 lbs. pressure through the port .
That hand pump is expensive. Can you use a weed sprayer?
Hell yeah that’s what I do just make sure it’s not being spayed back in to the system
Just tell them to get the DD primer pump.. 😂
Hay đất
Thanks for watching and thank you for the support. Make sure to subscribe and turn on notifications.
Cause of a no start. Owning a dd15 will cause a no start😑😐.
They can be a pain sometimes. 🇺🇸🔧💪🏼👊🏼
That truck didn’t need priming
Sean Jarrett thanks for watching. It was demonstration purpose only. 🇺🇸🔧👊🏼🇨🇱
The only approved part of your priming tool there was the fitting and shut off valve. Detroit since the dd15 came out has said the only approved tool to prime the system is the ESOC priming system. Same for the Davco system for the fuel separator. Your system works for a start I suppose. But the for the dd15 system you refill with what's said as low pressure and start with what's said high pressure. Your "approved" system have neither reading on it so it's unknown. Maybe delete this video and show people the proper way using an ESOC.
Do you work for Dahlmer Chrysler?
My Mexican mechanic does the pm without all the bullshit you just said .and he charges me $80
Jaime Cruz thanks for watching. The video is for demonstration purpose only. Not every time you will need to prime system after a PM. This is mostly when repairs have been made to the fuel system. Also that’s a great price and again thanks for watching and make sure to subscribe. 🇺🇸🔧👊🏼💪🏼🇨🇱
too much antifreeze in that storage tank way past the line
Spanish
Próximamente 🇺🇸🔧👊🏼🇨🇱💪🏼🇲🇽
@@TATEXPRESSINC ok exelente video pero en spanish seria good
the manual fuel pump on the fuel filters has always worked for me the only times it doesnt is when the truck is hard to start. it does take a lot of pumps but we are desiel mechanics not pussies