Open the program (press show all devices) - You find your PS4 controller (bInterval is usually 5 for ps4) and then you press install services. After this, you set the filtering checkbox as checked and set the RATE to 1000. Reconnect the controller and here you go. IF YOU WISH TO GO BACK - just change the rate to [default] and uncheck the checkbox and reconnect the controller. There you go, you are back to normal.
FOR ANYONE THAT IS HAVING ISSUES WITH A RED BAR OR SOMETHING SIMILAR. when you click install service a new window should pop up or a loading bar should pop up, i got the red bar when niether of those popped up. i then manually reverted what i installed on the controller to its defaults, and i tried it again, the first time you click install services it should ask you if youre sure and then it will download it. and each time after that it should just show the download bar really quickly.
You guys need to know that you can't tell the difference between the 0 to 2 and 2.8 ms delay its impossible, if this actually works and you are using bluetooth which is weirdly better than wired on the dualshock 4, doing this will likely not fix anything and you are experiencing input lag for a different reason. Please like this so more people see.
@Steve Fox definitely can, although I cant tell the difference between 100 to 120 and 120 to 144 so I usually keep my monitor at 100 hertz even though it has a max refresh rate of 144
i wouldnt say blue tooth is better than wired, and it is very easy to notice an 8ms difference when you have thousands of hours put into one game with a controller
@@gaminganecdotes6116 I know what you said, but I dont get why. The thing is, when you OC your ds4 controller you get 7ms less latency, combine that with a third party controller software and you get an extra 1ms. Also, your latency variation is significantly decreased with wired which is why wired is better over BT even if it has slightly higher latency
Most people say that 1-5 ms is basically unnoticeable but after 5 ms you may start to notice. I have confirmed this by using FL studio and a midi keyboard and pressing a note and feeling the delay.
Pin this if you will, I can say that I have used this on an XBone controller for Rocket League. I can definitely say that it's working, at first, things, felt off and I was making shots too early..because I'm so used to making up for the input delay..but now after getting used to it for a while I can really feel the benefit in this. I urge everyone to give it a shot, especially since it's free performance at no compromise.
one statement, this worked amazing for my friend, but for me it did not work as I can only assume my usb cord is not 1000hz, it came up with a error message when I went to filter on the device and I do not suggest accepting it as if you read it, it says it may cause the device to fail.
Worked first time I installed it, noticed the smoothness and more responsive gameplay. Then after few games it became slow, probably even slower than before I installed this program.. So I uninstalled it and installed it again. When I had installed it again and clicked "install services", nothing happened and my controller didn't connect with usb to the PC anymore... Even after uninstalling the program and deleting all files my controller didn't connect... So I basically had to recover the computer to factory new settings to get my god damn xbox one controller to work again.. I wouldn't recommend this program to anyone tbh...
wow thank you i was struggling coming from console to pc and something felt off. been trying to find how to fix it and this video fixed it thank you so much appreciate you.
This isn't working a all for me. Got to the part where you click Filter on device and I get a long weird error message saying it wont work after if I do it.
Seems sketchy so if it breaks your controller do this Type in "Control Panel" in the bottom left search icon Go to Hardware and Sound Then click on Device Manager At the bottom it should say Xbox Controller Right click and click on delete driver Unplug your controller and plug it back in, then it should work :)
i do it and then my controller wont connect even tho its wired then i tried doing everything you said and right at the end it dosnt come up saying delete driver
get a thin stick like a paper clip or something and turn around your controller and then you will see a little hole and just press it with the stick and hold for 3 seconds make sure it is plugged out
Do you have any suggestions for everyone having trouble? This seems simple and worth it, but the fact so many are having trouble and you’re not responding to any of them is suspect...
Getting a cable that can actually take 1000 hz tick rate will solve every problem. After a little research found out not all micro usbs are equal. Some come with surge protection or w/e (the little cylinder on the wire). Cable diameter and cable design also affects it. Since I've got this wire I have been able to overclock it without a single hiccup for over 3 months. Sekiro has never been more fun ZedLabz 3M charging cable for Sony PS4 controllers is the one I got.
vezi I did turn secure boot disabled but it still doesn’t works for me it says that the file is missing something and your controller would not work it does filter to 1000 but red line appears and controller doesn’t work. Can u help me I really want to reduce my inputs to 1 ms on my standard Xbox controller
I hope it work for me. If I play on 60fps my game freeze everytime, but if I play on 120fps my aim get so weird and delayed. It looks like my death zone is high, but at the same time is low idk
yes unfortunately increasing the poll rate to the max (1ms) is very very resource intensive, your system is struggling because the poll is too fast . The Dualshock 4 polls at 333mhz when utilized by ps4. you can try a faster rate but you shouldnt start at the fastest possible poll rate even if your system can handle it . Theres no decrease in latency on my DS4 that i can tell but my latency wasnt bad and usb is not the optimum interface . Its 5x faster on bt if correctly paired . P.S. The likelyhood of usb poll rate increasing performance on any controller not designed to run primarily from usb is not likely . Most modern controllers utilize a usb cable to sync and charge, while its possible for input to occur via usb, its not the default protocol . anytime u utilize a secondary relay for input it will cost u performance not gain u any .
I tried this with power a fusion controllers and it completely made it to where both controllers wouldn’t even work. Had to delete everything and delete the controller off of my computer to even get my controller to work again
I use a PS3 controller yeah I am outdated I am getting a PS5 this christmas anyways mine comes up red with no binterval it says yes and 1000 no binterval nvm fixed it by redoing it
When you just opened setup program, you have to instantly install driver for your Controller (Xbox, PS, or any others). Otherwise, all of you actions, that you've done before installing driver, will lead to red connection.
It's because the cable you are using isn't good enough. I ran into this issue too. Not all micro usb are equal. ZedLabz 3M charging cable for Sony PS4 controllers. This is the one I got and I've been having 1ms delay (according to DS4 Windows) with absolutely no hitches. But if you want a quick solution go into control panel> devices and printers> right click the controller and remove device. Then simply unplug and plug back in the controller. Will reverse the overclock meaning your wire will work with it. However overclocking it again will mean it will work for a limited time. Then it will jump up in delay and even the slightest movement will cause the issue to happen again.
@Anthony Ban Both actually. Or at least just the process in the video. I'll try to walk through it right now. First, you need to download the application called DS4 windows. This is used to monitor the controller so you can see the delay on the controller. (the aim is to get it at a 1 ms delay. Additionally this software lets you use the controller in games that don't support the Dualshock as it is not native to windows (like the xbox controller is). This can be done under the setting "hide DS4 Windows" in fact I had to do this in order to get Sekiro to work (My camera was spinning around and it registered no other input) Next download the driver listed in the description. This is the overclocking tool. So basically just follow what he does at 1:30. Finally you should test if it works. Play with the overclock for about an hour. If you are noticing any issues (like the controller disconnecting from nudging the wire, or better yet, you can view the log under DS4 windows as it shows you if the delay on the controller spikes too high you'll also be able to notice the delay too. If this happens then buying ZedLabz 3M charging cable for Sony PS4 controller will work. Hope this helps anyone get some crisp TikTok dubz for fortknighter idk what its called. For me it's been permanent for half a year, again no issues. Sorry for the late reply. ytube is screwy
Great Tutorial, thanks uploader!! One question tho, must I start this service ever time I start a game or once you've set it it will remember the settings (like after rebooting your PC)...?
Having trouble connecting my Xbox elite controller, anyone else having this issue? The elite controller tab is highlighted in red as opposed to green. When I revert my settings to default it goes back to working normally. Thanks!
For anyone getting the error in the text box. I disable the DRIVER SIGNATURE ENFORCER in advanced settings. bunch of vids on how to do it. SOLVED MY ISSUE PERFECTLY!!!!!!
input Lag on wired is jaw dropping. said out loud "WTF". Thanks man! Question: would thIs only work if gaming on controller on WIRED mode and not on bluetooth?
Worked perfectly. I'm using an ípega 9078 Gamepad with the ípega 9076 dongle. I thought I was lagging because of some incompatibility, but I just installed this drive and it works normally. Thank you from Brazil.
Thanks it worked, does this programme need to be installed to continue for it to work or can I delete it, secondly do I need DS4 always open for it to work whilst my games running? Thanks again
there was no reason to use this on anything that isnt using usb, this is an overclock for the polling rates that are sent over usb, for example the dualshock4 pollrate is 250hz over usb, the tool in this video amps that up to 1000hz (a standard number for gaming peripherals on pc), bluetooth was never using 250hz
can anyone tell me why mine isn't even showing up on the thing? I deleted it, downloaded it a second time and it still doesn't show me the controller is on the setup. I did it with a different controller...... Nothing either....
GUYS WARNING USE AT YOUR OWN RISK. YOU SHOULD NEVER DOWNLOAD FILES FROM UNKNOWN WEBSITES AND ALSO DOWNLOADING FILES DOES NOT REDUCE ANY INPUT LAG PLEASE DO NOT DO THIS MAY GET YOU A VIRUS
Geez, I've been playing a year on pc with an Xbox one controller. I knew I had input lag because when I would try to pick something up there was a delay, this got me killed multiple times. Thanks for this info man.
anyone has a fix for the red highlight? I have followed all the steps. When I disconnected my controller and reconnected it, It showed the red hightlight
sad to say that didn't work for me. Followed instructions got the controller set to 1000 successfully, but when I unplugged, and re-plugged in the controller, the Child name no longer appears and the entry (which now appears under "All" but not under "USB") is highlit in pink. It should be noted that I use a DB9 to USB adapter to use classic Atari controllers (real games only need a stick and one red button). In Windows settings-peripherals/printers the DB9 adapter still showed up as game controller, but if I went into into Parameters, no joystick is found to set up. Restored Windows to before the change, but the joystick attached to the adapter iremained unseen by windows until I remove the device in device manager, rebooted, and let windows find the adapter and reinstall the drivers. Joystick is once again seen. Oh well was worth a try. No harm no foul. Guess I have to live with the latency until I can get a decent native usb controller (that only has a stick and a single red button - unfortunately they are all easily broken chinese poop). (sorry if any of the my terms seem incorrect, I'm translating from a non-english windows installation and guesstimating what it would say under an english install.)
Open the program (press show all devices) - You find your PS4 controller (bInterval is usually 5 for ps4) and then you press install services. After this, you set the filtering checkbox as checked and set the RATE to 1000. Reconnect the controller and here you go. IF YOU WISH TO GO BACK - just change the rate to [default] and uncheck the checkbox and reconnect the controller. There you go, you are back to normal.
Hi friennd, apparently it solved it for me, I use a sn30 pro...I started having problems updating Windows, I tried everything...I changed the usb port on the adapter (5.0), updated FW, did repaired.... This solution seems to have worked
Thanks buddy because of u i messed up my controller and it wouldnt connect but i had to uninstall my controller usb and intall it back to fix it DONT DO THIS IT WILL MESS UP UR CONTROLLER
@@theprodigy4260 no it stoped working on my pc and i had to mess around in my pc settings to fix it it scared the shit outa me but i fixed it after 2 hours of tryna fix it
This doesnt work. All it does is fucking up your computer, disallowing your controller to connect. Either you buy a new controller or perform a full reset on your PC.
Thank you for the video....just to confirm, once i do this to play on my PC...will i be able to use the same controller to play on my PS4 normally? or will there be connection issues?
I don’t even get it cause I have did it but is marked in red for no reason I got the 1000 rate and filter on device by where it says blnterval it dosent say 1 for my controller???
GUYS WARNING USE AT YOUR OWN RISK. YOU SHOULD NEVER DOWNLOAD FILES FROM UNKNOWN WEBSITES AND ALSO DOWNLOADING FILES DOES NOT REDUCE ANY INPUT LAG PLEASE DO NOT DO THIS MAY GET YOU A VIRUS
@EErock Followed the instructions but get a warning message when checking the filter box. Windows can't verify digital signature. If I ignore it and proceed with the steps in the video then it does not see my controls at all until I uncheck the box. Rebooted and the tool shows 1000 but No for Filter so is this really working if the filter box is not checked?
I had a controller that had/ still had no input lag on games but it’s not mine so I bought a brand new one. My new controller however has Input lag and I have no idea why. I play rocket league (steam) if this helps at all
Im from rocketsciences' video on controller deadzone shapes. I've been using square deadzone for a bit now with Steam controller config but im noticing what feels like HUGE input delay compared to before. Is it just me or does steam big controller config support increase input lag?
Thanks for this video! One question, would this feature continue to work if we have the controller connected through Bluetooth? Or connected at all times only?
Im getting a warning message saying something about having a filter on and the device wont work.. and sure enough it doesnt when i have the filter on.. weird i got rate of 1000 set but still 3.5ms of delay
I just bought a new specta powera controller (cause my normal Xbox controller is broken) and I feel it with a lot imput lag I already use timer resolution and all that stuff but it didn’t work , helppp please
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Open the program (press show all devices) - You find your PS4 controller (bInterval is usually 5 for ps4) and then you press install services. After this, you set the filtering checkbox as checked and set the RATE to 1000. Reconnect the controller and here you go.
IF YOU WISH TO GO BACK - just change the rate to [default] and uncheck the checkbox and reconnect the controller. There you go, you are back to normal.
My thing shows red and doesn’t install service how do I fix?
@@micahstallings6983 same problem
@@micahstallings6983I can't be positive, but I think you have to disable windows secure boot in your BIOS.
maybe windows secure boot in bios@@camwingrovegolf
FOR ANYONE THAT IS HAVING ISSUES WITH A RED BAR OR SOMETHING SIMILAR. when you click install service a new window should pop up or a loading bar should pop up, i got the red bar when niether of those popped up. i then manually reverted what i installed on the controller to its defaults, and i tried it again, the first time you click install services it should ask you if youre sure and then it will download it. and each time after that it should just show the download bar really quickly.
What do I revert the changes made to the controller back to go back to normal
You guys need to know that you can't tell the difference between the 0 to 2 and 2.8 ms delay its impossible, if this actually works and you are using bluetooth which is weirdly better than wired on the dualshock 4, doing this will likely not fix anything and you are experiencing input lag for a different reason. Please like this so more people see.
@Steve Fox definitely can, although I cant tell the difference between 100 to 120 and 120 to 144 so I usually keep my monitor at 100 hertz even though it has a max refresh rate of 144
@Steve Fox for sure
i wouldnt say blue tooth is better than wired, and it is very easy to notice an 8ms difference when you have thousands of hours put into one game with a controller
@@dereksevcik6595 I didn't say 8ms, I said 2 to 2.8 or 0 to 2, also there is less latency over bluetooth for some odd reason.
@@gaminganecdotes6116 I know what you said, but I dont get why. The thing is, when you OC your ds4 controller you get 7ms less latency, combine that with a third party controller software and you get an extra 1ms. Also, your latency variation is significantly decreased with wired which is why wired is better over BT even if it has slightly higher latency
Works with dualsense as well! The wired delay on the controller was insane but now it's perfectly acceptable. Thanks for the guide!
Might be the greatest tutorial of all time
Most people say that 1-5 ms is basically unnoticeable but after 5 ms you may start to notice. I have confirmed this by using FL studio and a midi keyboard and pressing a note and feeling the delay.
Pin this if you will, I can say that I have used this on an XBone controller for Rocket League. I can definitely say that it's working, at first, things, felt off and I was making shots too early..because I'm so used to making up for the input delay..but now after getting used to it for a while I can really feel the benefit in this.
I urge everyone to give it a shot, especially since it's free performance at no compromise.
Bro this is exactly what Im using it for
do you have anything else you discovered that will help since its been three years since this comment lol
one statement, this worked amazing for my friend, but for me it did not work as I can only assume my usb cord is not 1000hz, it came up with a error message when I went to filter on the device and I do not suggest accepting it as if you read it, it says it may cause the device to fail.
Worked first time I installed it, noticed the smoothness and more responsive gameplay. Then after few games it became slow, probably even slower than before I installed this program.. So I uninstalled it and installed it again. When I had installed it again and clicked "install services", nothing happened and my controller didn't connect with usb to the PC anymore... Even after uninstalling the program and deleting all files my controller didn't connect... So I basically had to recover the computer to factory new settings to get my god damn xbox one controller to work again.. I wouldn't recommend this program to anyone tbh...
A E thanx for the heads up
This is a sacam
thank fuck for that bro
same
remove the controller from the pc then reconnect it again I have the thing here
Appreciate the help man! Great video!
wow thank you i was struggling coming from console to pc and something felt off. been trying to find how to fix it and this video fixed it thank you so much appreciate you.
Completely changed the way I play. Thanks to both of you.
This isn't working a all for me. Got to the part where you click Filter on device and I get a long weird error message saying it wont work after if I do it.
yea
Seems sketchy so if it breaks your controller do this
Type in "Control Panel" in the bottom left search icon
Go to Hardware and Sound
Then click on Device Manager
At the bottom it should say Xbox Controller
Right click and click on delete driver
Unplug your controller and plug it back in, then it should work :)
i do it and then my controller wont connect even tho its wired then i tried doing everything you said and right at the end it dosnt come up saying delete driver
@@levels601 Whats your discord, I’ll help you in a call whenever I get on
Hey what’s your discord
Thanks a lot! you have no idea! I thought I broke my controller on this pc forever
I disabled secure boot and extracted everything but it says there is a “high probability of your device not functioning”when i press filter on device
my device doesn’t function anymore 🙂
I have the same problem...Have you solved?
same
did anyone figure this out?
Works on drawing tablets as well. Decreases input delay very little, but a good enough amount.
i need help its turns red after i plug in and out
same here
For me too
get a thin stick like a paper clip or something and turn around your controller and then you will see a little hole and just press it with the stick and hold for 3 seconds make sure it is plugged out
BROOOOOOO I just did this and DOMINATED first match running settings
Do you have any suggestions for everyone having trouble? This seems simple and worth it, but the fact so many are having trouble and you’re not responding to any of them is suspect...
Getting a cable that can actually take 1000 hz tick rate will solve every problem. After a little research found out not all micro usbs are equal. Some come with surge protection or w/e (the little cylinder on the wire). Cable diameter and cable design
also affects it.
Since I've got this wire I have been able to overclock it without a single hiccup for over 3 months. Sekiro has never been more fun
ZedLabz 3M charging cable for Sony PS4 controllers is the one I got.
@@Haise888 Where can i find one of these cables that support 1000hz tick rate? they certainly aren't advertised to support it.
If your binterval stills the same, you need to unplug then plug again the usb, it will change to 1.
*FOR ANYONE THAT HAS THE RED WHEN U DISCONNECT N CONNECT*
*YOU HAVE TO DISABLE SECURE BOOT N NEXT TIME YOU DO IT*
*IT'LL WORK trust*
@@lions766 yeah
how do i disable secure boot?
Swrkyy search it up
vezi I did turn secure boot disabled but it still doesn’t works for me it says that the file is missing something and your controller would not work it does filter to 1000 but red line appears and controller doesn’t work. Can u help me I really want to reduce my inputs to 1 ms on my standard Xbox controller
everyone is saying that fucks up my pc
is that true? anyone knows?
for me worked fine but im worried about it
I hope it work for me. If I play on 60fps my game freeze everytime, but if I play on 120fps my aim get so weird and delayed. It looks like my death zone is high, but at the same time is low idk
Did it work for you?
My movement feels really clunky feels like input delay increased rather than decreased
Rahamabin7 really?
should I do it or no?
Same
Yeah anyone got a fix?
yes unfortunately increasing the poll rate to the max (1ms) is very very resource intensive, your system is struggling because the poll is too fast . The Dualshock 4 polls at 333mhz when utilized by ps4. you can try a faster rate but you shouldnt start at the fastest possible poll rate even if your system can handle it . Theres no decrease in latency on my DS4 that i can tell but my latency wasnt bad and usb is not the optimum interface . Its 5x faster on bt if correctly paired .
P.S. The likelyhood of usb poll rate increasing performance on any controller not designed to run primarily from usb is not likely . Most modern controllers utilize a usb cable to sync and charge, while its possible for input to occur via usb, its not the default protocol . anytime u utilize a secondary relay for input it will cost u performance not gain u any .
I tried this with power a fusion controllers and it completely made it to where both controllers wouldn’t even work. Had to delete everything and delete the controller off of my computer to even get my controller to work again
have i fixed it yet, it happened to my my controller won’t work, there is like ares box
red* box
I use a PS3 controller yeah I am outdated I am getting a PS5 this christmas anyways mine comes up red with no binterval it says yes and 1000 no binterval nvm fixed it by redoing it
When you just opened setup program, you have to instantly install driver for your Controller (Xbox, PS, or any others). Otherwise, all of you actions, that you've done before installing driver, will lead to red connection.
Does it work well with the ps3 controller?
Seems to work without the filter box checked for me for anyone having issues with it
omfg, from 4ms to 1ms LOVE YOU!
how did you measure the improvement?
it really worked?
RedGaming23 ds4windows
Hey are u using usb or wired?
@ZeroV whats the difference between usb and wired
Thank you so much. Even in skyrim it made such a huge difference.
Mine just turns red and my controller disconnects please help
same
Just click reset and it would be fine.
It's because the cable you are using isn't good enough. I ran into this issue too. Not all micro usb are equal. ZedLabz 3M charging cable for Sony PS4 controllers. This is the one I got and I've been having 1ms delay (according to DS4 Windows) with absolutely no hitches.
But if you want a quick solution go into control panel> devices and printers> right click the controller and remove device. Then simply unplug and plug back in the controller. Will reverse the overclock meaning your wire will work with it. However overclocking it again will mean it will work for a limited time. Then it will jump up in delay and even the slightest movement will cause the issue to happen again.
@@Haise888 are u saying that just buying the cable is enough? or do you need to buy the cable AND go through this process in the video? thanks
@Anthony Ban Both actually. Or at least just the process in the video. I'll try to walk through it right now.
First, you need to download the application called DS4 windows. This is used to monitor the controller so you can see the delay on the controller. (the aim is to get it at a 1 ms delay. Additionally this software lets you use the controller in games that don't support the Dualshock as it is not native to windows (like the xbox controller is). This can be done under the setting "hide DS4 Windows" in fact I had to do this in order to get Sekiro to work (My camera was spinning around and it registered no other input)
Next download the driver listed in the description. This is the overclocking tool. So basically just follow what he does at 1:30.
Finally you should test if it works. Play with the overclock for about an hour. If you are noticing any issues (like the controller disconnecting from nudging the wire, or better yet, you can view the log under DS4 windows as it shows you if the delay on the controller spikes too high you'll also be able to notice the delay too. If this happens then buying ZedLabz 3M charging cable for Sony PS4 controller will work.
Hope this helps anyone get some crisp TikTok dubz for fortknighter idk what its called. For me it's been permanent for half a year, again no issues. Sorry for the late reply. ytube is screwy
when i click filter on device it won't let me and then my controller stops working wtf
NO WAY I WENT FROM 4ms to .5ms TYYYY
@@estebanod he means 0.5 bruh, how its that worse
Great Tutorial, thanks uploader!! One question tho, must I start this service ever time I start a game or once you've set it it will remember the settings (like after rebooting your PC)...?
Having trouble connecting my Xbox elite controller, anyone else having this issue? The elite controller tab is highlighted in red as opposed to green. When I revert my settings to default it goes back to working normally. Thanks!
same problem i get an error everytime i chose filter
@@spertalisT1 i have the solution
When I plug my controller back in it shows up in red color do you guys know why ?
same
@@mu9190 Did you figure this out? My software doesn't respond now when I have the controller plugged in.
@@voodiethemoody same
For eveyone still stuck here, just watch Rocket Science's video on this.
When I tried it my controller had more inpit delay :((
Does it affect if you timer resolution is on as well?
timer is only for keyboard and mouse player
im controller on pc so i should use this?
I mean yah only pc players can use this
Diego Parker false, timer res lowers controller input lag
@@cg-wo4ik really?
For anyone getting the error in the text box. I disable the DRIVER SIGNATURE ENFORCER in advanced settings. bunch of vids on how to do it. SOLVED MY ISSUE PERFECTLY!!!!!!
Thanks dude💯👍
YOOOOO WTF THANKS MAN I'M SUBBING!
Thanks for the instuctions , solwed my problem. Nice!
How frequently should I do this? Thanks for the video!
I have it at 1000 I’m not quite sure what the 1 is for but mine is 4 idk how to change and I can’t apply the yes option beachside there is a warning
When I click filter it says it cannot filter and the controller’ child name disappears.
Exactly it doesn’t work anymore it used to work back then a while ago
@A Big Lion not for me
You have to turn off Safe Boot
input Lag on wired is jaw dropping. said out loud "WTF". Thanks man!
Question: would thIs only work if gaming on controller on WIRED mode and not on bluetooth?
Thank you! you explained it better then everybody has
the other guy did a bad job explaining it but i cam to this and it worked perfectly thanks bro
How do I change my thing to yes and how do I change the number for it to become 1?
There is a little box about filters
Worked perfectly. I'm using an ípega 9078 Gamepad with the ípega 9076 dongle. I thought I was lagging because of some incompatibility, but I just installed this drive and it works normally. Thank you from Brazil.
Thanks it worked, does this programme need to be installed to continue for it to work or can I delete it, secondly do I need DS4 always open for it to work whilst my games running? Thanks again
Did it need to be installed or what ?
idk which one's to pick they're different options than yours
Will this work when connected via Bluetooth too?
there was no reason to use this on anything that isnt using usb, this is an overclock for the polling rates that are sent over usb, for example the dualshock4 pollrate is 250hz over usb, the tool in this video amps that up to 1000hz (a standard number for gaming peripherals on pc), bluetooth was never using 250hz
can anyone tell me why mine isn't even showing up on the thing? I deleted it, downloaded it a second time and it still doesn't show me the controller is on the setup. I did it with a different controller...... Nothing either....
yup red highlight on controller and now usb doesn’t connect to my controller and he’s no replying to any of those comments gg’s not helpful at all
Did you fix it? Or is he being a dick?
Just reinstall ur USB easy
GUYS WARNING USE AT YOUR OWN RISK. YOU SHOULD NEVER DOWNLOAD FILES FROM UNKNOWN WEBSITES AND ALSO DOWNLOADING FILES DOES NOT REDUCE ANY INPUT LAG PLEASE DO NOT DO THIS MAY GET YOU A VIRUS
ok
I am surprised I could recognise something like 6.8ms of delay
I have a PS4 controller, will this work?
When you a gamer you notice it all
Geez, I've been playing a year on pc with an Xbox one controller. I knew I had input lag because when I would try to pick something up there was a delay, this got me killed multiple times. Thanks for this info man.
anyone has a fix for the red highlight? I have followed all the steps. When I disconnected my controller and reconnected it, It showed the red hightlight
Same
video increased input on bluetooth for my DS4 controller. Posted may need to either post an updated further explained video OR get reported.
this loser.. lol
@@mrpeabody3119 how was that helpful?
you didn't even test it at the end of the video which give me suspicion
It works I tried it
@@yonirev2560 fam it doesnt work my controller starts getting delay few mins and few mins feels okey
@@Raptor-lg4mh That's called have shit internet buddy
@@atomicgoldrush yoooo wtf no chill lol i agree tho
sad to say that didn't work for me.
Followed instructions got the controller set to 1000 successfully, but when I unplugged, and re-plugged in the controller, the Child name no longer appears and the entry (which now appears under "All" but not under "USB") is highlit in pink.
It should be noted that I use a DB9 to USB adapter to use classic Atari controllers (real games only need a stick and one red button). In Windows settings-peripherals/printers the DB9 adapter still showed up as game controller, but if I went into into Parameters, no joystick is found to set up. Restored Windows to before the change, but the joystick attached to the adapter iremained unseen by windows until I remove the device in device manager, rebooted, and let windows find the adapter and reinstall the drivers. Joystick is once again seen.
Oh well was worth a try. No harm no foul. Guess I have to live with the latency until I can get a decent native usb controller (that only has a stick and a single red button - unfortunately they are all easily broken chinese poop).
(sorry if any of the my terms seem incorrect, I'm translating from a non-english windows installation and guesstimating what it would say under an english install.)
no sadly this doesnt work and after doing this my controller doesn't work
it shows red when i do this
Open the program (press show all devices) - You find your PS4 controller (bInterval is usually 5 for ps4) and then you press install services. After this, you set the filtering checkbox as checked and set the RATE to 1000. Reconnect the controller and here you go.
IF YOU WISH TO GO BACK - just change the rate to [default] and uncheck the checkbox and reconnect the controller. There you go, you are back to normal.
@@Spice-xs4ie it dont work
@@DonutL same idk what to do
You need to extract all and don’t just run it from the zip folder. That fixed it for me
Hi friennd, apparently it solved it for me, I use a sn30 pro...I started having problems updating Windows, I tried everything...I changed the usb port on the adapter (5.0), updated FW, did repaired.... This solution seems to have worked
How do you check your current input lag for your controller on pc?
some settings in ds4
Doesn't seem to work with the Xbox Series X controller, causes it to stop working until I set it back to the default. rip for me
yeah same here is just makes it connect via bluetooth instead
Thank you for this very informative information.
I am wondering how you test or check the latency?
This kinda worked it improved it , still kinda stutters but not really any other suggestions bro? Thanks
For all y’all that don’t know turning off aim assist gives you less delay
Same
Thanks buddy because of u i messed up my controller and it wouldnt connect but i had to uninstall my controller usb and intall it back to fix it DONT DO THIS IT WILL MESS UP UR CONTROLLER
In what way did it mess it up? More input lag?
@@theprodigy4260 no it stoped working on my pc and i had to mess around in my pc settings to fix it it scared the shit outa me but i fixed it after 2 hours of tryna fix it
you do this at your own risk. you searched for this method no the other way around.
is this permanent or do i have to do this again everytime i take the cable out
Permanent until you uninstall the drivers manually
@@swift6994 the program has to stay open
@@Xero-qx1xy no
@@swift6994 yes, dafuq i have it and it stops when you close the program, steam has built in dualshock 4 support
I messed up my controler, the number on the right that said "5" disapeared
This doesnt work. All it does is fucking up your computer, disallowing your controller to connect. Either you buy a new controller or perform a full reset on your PC.
Dude this worked perfect maybe you just had your own problems lmao
DUDE you helped me out so much man thanks it was so simple too!!!
Wow amazing upload, this is a must for Tekken players who main Mishimas
Holy shit I thought it was this making it look weird but I’m on 59 ping doing quad edits wtf thanks man
it didnt cause a virus tho right ?
@@jackolhizerr3 It's not a virus, who the fuck told you that?
@@SlayzzFPS chill bro he was assuming cuz it sketch asf
@@jonah8667 have you tried it yet?
@@jackolhizerr3 have you tried it yet?
The device becomes red when i plug it back in is something wrong?
this screwed my controller and increased input lag by a lot how do i turn it off
did u figure iot out
change it back to default i guess
Thats a lot of info😂
Thank you for the video....just to confirm, once i do this to play on my PC...will i be able to use the same controller to play on my PS4 normally? or will there be connection issues?
I don’t even get it cause I have did it but is marked in red for no reason I got the 1000 rate and filter on device by where it says blnterval it dosent say 1 for my controller???
Same
thanks a lot :). works on bluetooth too (by doing it on your bluetooth usb).
When i click install service nothing happens. Then when i try to click "filter on device" it says the filter driver service is not installed
you should hear a notification sound from windows if you click on install service if you dont it doesnt matter just change it to 1000
GUYS WARNING USE AT YOUR OWN RISK. YOU SHOULD NEVER DOWNLOAD FILES FROM UNKNOWN WEBSITES AND ALSO DOWNLOADING FILES DOES NOT REDUCE ANY INPUT LAG PLEASE DO NOT DO THIS MAY GET YOU A VIRUS
Super helpful, thanks! Do these settings remain persistent at startup?
This still helped a year after it was posted! My game feels so much better now
Wait rly?
What games do u play cus mine doesnt work on all the games
@@deonyt932 Yes it is worth doing if you play wired controller on pc. It only took a couple minutes to set up
@@deonyt932 Fortnite
@@TonyRomoforMVP but at the 2.55 min my controller doesnt show up do u know up
@EErock Followed the instructions but get a warning message when checking the filter box. Windows can't verify digital signature. If I ignore it and proceed with the steps in the video then it does not see my controls at all until I uncheck the box. Rebooted and the tool shows 1000 but No for Filter so is this really working if the filter box is not checked?
same problem
Thank you for explaining this good last vid I saw about this same thing the guy did a terrible job explaining.
I had a controller that had/ still had no input lag on games but it’s not mine so I bought a brand new one. My new controller however has Input lag and I have no idea why.
I play rocket league (steam) if this helps at all
Im from rocketsciences' video on controller deadzone shapes. I've been using square deadzone for a bit now with Steam controller config but im noticing what feels like HUGE input delay compared to before. Is it just me or does steam big controller config support increase input lag?
I believe it does, but iirc rocket science mentioned that the delay was quite small 1-2 ms
bro, my laptop doesn't recognize my controller no more. lol
Thanks for this video! One question, would this feature continue to work if we have the controller connected through Bluetooth? Or connected at all times only?
Connected
why is mine red i still dont know the issue
So is mine
do i have to open it in the backround while playing?
DxY_ i hope someone answers
@@elvarfn2086 i asked the guy who made the video an he said he just do the steps in the video so iguess you dont have to open it in the backround
@@dxy_6423 If its closed it doesnt change anything
the input lag is barely noticeable now with both my bluetooth controllers. thank you so much!!
did you plug in the remote and then connect using bluetooth?
when i unplug my controller and plug back in it then shows red instead of green and it does not work can u help
same
@@kokehe8596 same
Me too it didn’t work for me at all
thank you thus helped alot if you know what fortnite arena is i got up to 8`000 points in there with my controller and this input delay
THIS ACTUALLY WORKED!!
How do yk
Im getting a warning message saying something about having a filter on and the device wont work.. and sure enough it doesnt when i have the filter on.. weird i got rate of 1000 set but still 3.5ms of delay
Just to let everyone know it works on your keyboard and mouse
Yo like if I put my wire in keyboard and mouse of controller then do this it would work ?
I dont get what u r saying
After plugging my elite controller back in my boxes turn red ??
Same is it working for you now?
@@Nach716 I have the Same Problem :( do you fix it?
Everytime I do filter on device It goes red any fix?
HeavenlySoft same
same its not working u cant get ur controller better with and app if usee his controller already says 1 so yeah...
When I select "put on filter" The bar goes from green to red and all information is not displayed.. any help? WIn11
Also I already got this software thing, but do you have to keep applying it everytime you turn your pc on?
Go to task manager and make so it's a start up I'm I'm guessing btw
error 577, does not work
I just bought a new specta powera controller (cause my normal Xbox controller is broken) and I feel it with a lot imput lag I already use timer resolution and all that stuff but it didn’t work , helppp please