If u have a ps5 controller and u dont see it, In the DS4Windows settings tab under DEVICE OPTIONS make sure the "DualSense Controller Support" box is enabled. For some reason this isnt enabled by default. Reconnect the controller and it should work.
that audio tip for the controller is clutch. been so annoying my mic switching to that when i plug the controller in. ill be landing into warzone before i realize its controller mic
This works for mouse too found this good stuff after much digging . Wish there was a simple guide before , so would not have to work so hard before figuring things out .
This the second pack that didn’t work for me I tried using your timer resolution pack and got to the power shell part with prime 95 running In the background and would get a lot of errors to the point I had to reset the pc and I did all the steps then when I downloaded this pack and attempted to extract files for some reason it won’t let me your prep folder is empty as if it didn’t extract properly and I have no idea why
U can close it. It's going to be overlcocked everytime now even if you restart. But it's only going to be on YOUR computer, and ONLY on the USB port that you have the controller plugged in while you did the overclocking. Basically remember that the overclock is linked to the USB port. If you switch USB ports , your controller won't be overclocked anymore. Doesn't matter though, if you want you can just overclock your controller on every USB port if that's a issue, but for me it's not. Most people only use the same USB port for their controller anyway
if I overclock my controller the duration on the xinput app says around 0.5 to 0.9 with some spike to 9 or 8. Jitter is 1.8 and the max is 9 and min is 0.4. If I drop it to 500 it's a consistent 1.5 around that with a 0.5 jitter and 5 max what should I choose
How about bro, does it work if I only use hidsuf? I'm in a competitive clan and they don't allow the ds4 Windows. I only have the doubt if only with the hidsuf program I can lower the input on the Dualshock control Pls help bro😢❤
does it affect the other platforms? like, would it still be connected to my nintendo switch after the guide? im afraid that it wont work on my switch anymore
same. the new version that has the 8000 polling rate doesnt allow 1000 to reach 1ms anymore an idk why. can anyone help with this? 1000 use to get me 1ms but now 1000 says 4... i have to put it to 2000 to get 1ms but then it hitches an causes frame drops
TO me it says: Error! Player 1 - XBOX 360 Controller Not Found! And im using a PS5 controller. Very strange as you mentioned itll only work with PS controller
Ok, so I did everything you've mentioned in the video, everything seems to work just fine, DS4 says I have a 0.5 rate. I want to use it to play EA FC25 which is a Steam game, should I disable the emulation from there cuz i've heard it adds input lag.
For some reason Asus ROG Strix motherboards (B550-f Gaming Wifi I, II, & Non-Wifi) w/ my 5800x3d, my ds4 is at 1.95ms (500hz) default when using cpu ports but is at the correct default speed 3.95ms (250hz) when using chipsets. The chipset feels smoother when both ports are at 1000hz. Any idea why my cpu ports are at 1.95ms/500hz default?
Im playing rocket league on a semi-pro level and overclocking my ps5 to 8000 hz is actually better than 1000hz. it doesnt make my game stutter or anything.
You guys didn’t even watch the vid, just try overclocking anything over 1000hz and run the xinput test, you will see you it’s still 1000hz. Only thing that changes is more stress on the cpu which can cause perfomance issues and placebo. Did the test myself with the ps5 controller on 8k, still 1000hz
idk why but my ps5 controller can´t be overclocked, like bro i set 1000 hertz and just doesn't worked, its the first time that something u upload does´not do :(
it's bec it forces ur cpu to run at 1000hz it won't work with 2 cores cpus like i3 8100 it will cause fps drops try to get at least R5 5600G to improve ur overclocking experience
Increase your FPS📈, minimize input delay:
xilly.net
If u have a ps5 controller and u dont see it, In the DS4Windows settings tab under DEVICE OPTIONS make sure the "DualSense Controller Support" box is enabled. For some reason this isnt enabled by default. Reconnect the controller and it should work.
thank you bro
thanks
best comment, thank you
doesnt work for me :(
bro lmao, wb xbox
If you cant find your Ps5 controller in DS4 Windows. Head over to settings -> device options and press Dualsense.
ty bro
god bless u bro
if yall having problems with extracting use winrar to extract files
best overclock video !!!! you are best
wow man you gave a in depth video bro. ngl i had to sub man
that audio tip for the controller is clutch. been so annoying my mic switching to that when i plug the controller in. ill be landing into warzone before i realize its controller mic
my interval is stuck at 4 no matter what, not sure what to do
thanks bro, work perfectly
This works for mouse too found this good stuff after much digging . Wish there was a simple guide before , so would not have to work so hard before figuring things out .
Overclock a mouse to 1000hz lol thats insanely low my guy.
@@sparkitup531 but that's 4x 125Hz which is the default in my mouse . Some mouse can even be over locked to 2000/4000 hz . Depends on mouse model .
DS4 wont detect my victrix pro controller with enabled dualsense controller, anyone know the solution ?
This the second pack that didn’t work for me I tried using your timer resolution pack and got to the power shell part with prime 95 running In the background and would get a lot of errors to the point I had to reset the pc and I did all the steps then when I downloaded this pack and attempted to extract files for some reason it won’t let me your prep folder is empty as if it didn’t extract properly and I have no idea why
can i close hidusbf while gaming or it has to run in the background to work on overclocking controller??
U can close it. It's going to be overlcocked everytime now even if you restart. But it's only going to be on YOUR computer, and ONLY on the USB port that you have the controller plugged in while you did the overclocking.
Basically remember that the overclock is linked to the USB port. If you switch USB ports , your controller won't be overclocked anymore. Doesn't matter though, if you want you can just overclock your controller on every USB port if that's a issue, but for me it's not. Most people only use the same USB port for their controller anyway
@@ChaoticMuchXwhen I use that on my ps5 controller, it stops working. I have to delete my controller from device manager
i have the victrix gambit controller and it only goes to 500hz
if I overclock my controller the duration on the xinput app says around 0.5 to 0.9 with some spike to 9 or 8. Jitter is 1.8 and the max is 9 and min is 0.4. If I drop it to 500 it's a consistent 1.5 around that with a 0.5 jitter and 5 max what should I choose
is there a way to do this without turning off memory integrity?
^this
How about bro, does it work if I only use hidsuf? I'm in a competitive clan and they don't allow the ds4 Windows. I only have the doubt if only with the hidsuf program I can lower the input on the Dualshock control
Pls help bro😢❤
When i put it to 8000hz, it goes to 4 binterval.
cant get my victrix to overclock everytime i check on imput tester it says its still 120 or whatever
filter on device disconnects my controller with the error code 1060... is there currently any fixes for it? ( I did use the windows 11 fix)
Desative isolamento de nucleo do seu windows!
good video I have a question
I don't really understand what Windows 11 fix does? can you explain to me
does it affect the other platforms? like, would it still be connected to my nintendo switch after the guide? im afraid that it wont work on my switch anymore
same. the new version that has the 8000 polling rate doesnt allow 1000 to reach 1ms anymore an idk why.
can anyone help with this? 1000 use to get me 1ms but now 1000 says 4... i have to put it to 2000 to get 1ms but then it hitches an causes frame drops
your computer can actually only register like 2000hz anyhting above doesnt really make a difference
IT Works Thanks
TO me it says: Error! Player 1 - XBOX 360 Controller Not Found! And im using a PS5 controller. Very strange as you mentioned itll only work with PS controller
found the solution myself: I had selected DualSense
@@elguiri_ where?
@@S4NN on ds4 windows where it says "selected profile" put it as defult, it worked for me
Ok, so I did everything you've mentioned in the video, everything seems to work just fine, DS4 says I have a 0.5 rate. I want to use it to play EA FC25 which is a Steam game, should I disable the emulation from there cuz i've heard it adds input lag.
Same bro. I play fc 25 on ea app but when i open ds4 windows and open the game . The game doesn’t open. What did you do ?
gives me error when i try to extract it
same
What if I play on Xbox not pc, is there controllers with low latency out the box ?
GameSir has to controllers check them out
Yes, tarantula pro for xbox or gamesir g7
What should I do if my controller is not using the default profile?
Prep folder im on windows 10 i have to run the windows 11 reg? Or what i can do with that step
The scuf envision pro is fast at too
For some reason Asus ROG Strix motherboards (B550-f Gaming Wifi I, II, & Non-Wifi) w/ my 5800x3d, my ds4 is at 1.95ms (500hz) default when using cpu ports but is at the correct default speed 3.95ms (250hz) when using chipsets. The chipset feels smoother when both ports are at 1000hz. Any idea why my cpu ports are at 1.95ms/500hz default?
Im playing rocket league on a semi-pro level and overclocking my ps5 to 8000 hz is actually better than 1000hz. it doesnt make my game stutter or anything.
Placebo, watch the video and test for yourself as to how its not 8000hz.
@@Xilly I have mine overclocked at 8000 Hz and my latency is lower or at least i feel a difference on 8000 than 1000. Do you know why?
@@Xilly I know but I still notice a slight difference
@@TwitchManicxxclips that's what I'm saying
You guys didn’t even watch the vid, just try overclocking anything over 1000hz and run the xinput test, you will see you it’s still 1000hz. Only thing that changes is more stress on the cpu which can cause perfomance issues and placebo.
Did the test myself with the ps5 controller on 8k, still 1000hz
bro thank you
You always have to unplug and plug back in for it to read properly and taking a ps5 controller to 8000 doesn’t hurt anything at all!!
When I overlock mine too 8000hz my fps gets cut in half
@@hi-gs6gv then you have bigger issues cause mine and several other people have it to 8000 and I’m still getting well over 250+fps
8000 been tested , it just reads inputs twice. Only overclock to 1000hz.
@@Kan3ManXwhat its better 8000 or 1000?
@@gian_19 8000 just reads the readings twice , so 1000hz is max and should be used
idk why but my ps5 controller can´t be overclocked, like bro i set 1000 hertz and just doesn't worked, its the first time that something u upload does´not do :(
when i move my stick in a circle on the test it tells me 1000hz, but when i move it back and forth, i get 100ms input delays. how do i fix?
bought a gulikit kk3, she runs at 1000hz already with 1ms of lag
You can also test the delay right inside of ds4 windows all you have to do is go to edit and controller reading I get 0.4/0.5 on my ps4 controller
no its not consistent
@@Xilly interesting its consistent for me every latency tester I've used are similar numbers
@@sheawhitegirlhow you get your ps4 to 0.4 i set my poling rate to 1000hz and and it doesnt work i have like 3.5 ms
@@pecjakstar6439 There's a code you can use in scripts
@@pecjakstar6439fix?
i can't open de setup pls help
when i open the Xinputtester, it says "Error! Player 1 - XBOX 360 Controller Not Found!" and my ps4 controller is plugged in and everything plz help
Close it, later
same wtf
make sure u go to the edit controller and others tab then emulate xbox 360 controller
did you solve the issue? mine is the same...
@@colbizonu nah I just gave up and reset everything
its not letting me extract the files it keeps giving me errors
same
Did yall figure out how to fix it?
same
use winrar or any other third party extracting software
Download ran
hi my controller isnt being found on my pc but works on fifa and fortnite as expected how do i fix this so its found in ds4 etc etc.
got an issue, feels like it goes back to default after doing it once and restarting my pc any fix?
Yeah same you find a fix?
when extracting, the prep file does get installed,, error
same, did u fix it, if so how?
@@goldengoose119 get winrar and extract with winrar
@@goldengoose119 i somehow found my way back but use a extractor like 7zip and extract using 7zip
How do I remove this if it is already installed?
thx bro
it works?
u cnt overlock xbox controller
so what about if u keep getting an error
Does this work for scuf controllers
More specifically scuf envision pro
what abt xbox?
Watch newest controller video
for some reason it maxes out 400-500, Im using a ps5 controller.
when i open xinputtest it says errornplayer 1!
Why do you have Xbox controller in the thumbnail if doesn't work
get the gamesir g7 se if you want the lowest delay or a ps5 controller you can overclock the ps5 to 8000hz
@@cxmbooono 1000 max otherwise it’s causes issues
Put it to 1000hz@@cxmbooo
so the Xbox players stop doing this thinking it works by watching it and hearing what I said. lol
@@Xilly real
didnt work on elite series 2, please help
no shit elite series 2 is xbox
I’m here! 💪🏻
nice, my controller got to 110hz from 250hz :(
Not working on my windows 11
the extraction isnt working
same with me, did u fix it?
can overclocking controller damage it ?
no
doesnt let me install
Bro this program hidusb not good it’s causing drop frame 😞💔
no it doesnt, ds4 windows is what causes fps drops for some people, you also need to disable secure boot in your bios, which this guy didnt mention.
controller ps5 1000 hz 4 iterval ?
have the same.. 1000 hz and stay on 4
same. the new version that has the 8000 polling rate doesnt allow 1000 to reach 1ms anymore an idk why
is that normal ? I have it as well...
@@colbizonu you can put to 8000 Hz and after refresh it. Now it works
can’t extract
overclocking this, is causing FPS drops.. I was steady on 144fps and now it's down to 110fps and drops to 60fps any solution?
is your fps fixed?
it's bec it forces ur cpu to run at 1000hz
it won't work with 2 cores cpus like i3 8100 it will cause fps drops
try to get at least R5 5600G to improve ur overclocking experience
i cant extract its error
try to run it without extracting, thats what i did
@@goldengoose119doesn’t work
The goat
Does this work with dual sense edge
No, its already 1000 hz out of the box which is good
@@Xilly what about input delay with my duel sense edge when I run ds4 it says I got a 3 to 4 mill delay
bro i have 0 ms input delay lmao wtf
niceee
w
And how could i know that all this is safe to execute ?