For a couple of years now. I actually have 2 of them. They work really great! Only downside I’ve notice is that it takes almost a quart of paint to fill the line.
Do you get little bumps in your paint? I have the 5x and about half the time there are little gobs in the paint. Thought I'd ask since you didn't put through a filter
@MasterBojangles use compressed air to blow off your substrate before you spray. Set up an exhaust fan and blow any dust into it. Always SVT! Sand, Vacuum (use a soft bristle brush attachment and get in all the crevices) and lastly, TACK! Run a tack cloth over the entire surface right before you shoot your finish
Correcto gracias por el dato de la tarjeta de la tarjeta de la tarjeta de la tarjeta de la tarjeta de la tarjeta de la tarjeta de la tarjeta de la tarjeta de la tarjeta de la tarjeta de la tarjeta de la tarjeta de la tarjeta de la tarjeta de la tarjeta de la tarjeta de la tarjeta de la tarjeta de la tarjeta de la tarjeta 💳 la tarjeta de la tarjeta de la tarjeta de 💳💳💳💳💳💳💳💳💳💳💳💳
Thanks for the video!
Pretty high pressure for that enamel. It’s the only enamel I use so great choice for that.
Just got done spraying the interior
Of a 16x40 cabin. EWP used minwax with a x7 great results
I don’t know how long you’ve had that system for, but do you still like it? I have one on its way to me now.
For a couple of years now. I actually have 2 of them. They work really great! Only downside I’ve notice is that it takes almost a quart of paint to fill the line.
Which tip are you using
Follow the instructions. This is not a tutorial on how to set up the sprayer.
I used one for the first time today, but it’s my father in laws and he had a horizontal tip on it. Threw me for a loop at first. Nice machine though.
It's not a horizontal tip. You can loosen the tip with a couple wrenches and turn it.
Solo quiero saber si se usa pintura de aceite o de agua también
Hola que tipo de pintura usan acá en Perú hay dos lavables que solución de agua y esmalte que es sintética o aceite
Gente que no cuida esos equipos llenos de pintura catalizada hay que protegerlos son muy valiosos
Do you get little bumps in your paint? I have the 5x and about half the time there are little gobs in the paint. Thought I'd ask since you didn't put through a filter
I have gotten bumps before. But after I got a air filter to pull out the over spray it went away. I would try looking into that.
@@timberdustwoodworking oh interesting, something to consider thanks
@MasterBojangles use compressed air to blow off your substrate before you spray. Set up an exhaust fan and blow any dust into it. Always SVT! Sand, Vacuum (use a soft bristle brush attachment and get in all the crevices) and lastly, TACK! Run a tack cloth over the entire surface right before you shoot your finish
Did you add water?
No, that’s just straight from the store 🙌
Rate
Que es eso
Correcto gracias por el dato de la tarjeta de la tarjeta de la tarjeta de la tarjeta de la tarjeta de la tarjeta de la tarjeta de la tarjeta de la tarjeta de la tarjeta de la tarjeta de la tarjeta de la tarjeta de la tarjeta de la tarjeta de la tarjeta de la tarjeta de la tarjeta de la tarjeta de la tarjeta de la tarjeta 💳 la tarjeta de la tarjeta de la tarjeta de 💳💳💳💳💳💳💳💳💳💳💳💳