Disable ABS on CFMOTO IBEX 800T (The Easy Way)
HTML-код
- Опубликовано: 26 авг 2024
- *** Disconnect Battery before installing switch!!!
In this video we install an ABS bypass switch. This CFMOTO Ibex 800T does not come with a way to disable ABS and this after market switch allows you to do so.
Thanks for this!
Awesome now we can do mine!
Send it!
Good news...i took it apart and hooked it up to the front abs sensor plug and i havent had the engine light come back on..
Thanks, my guy! You rock.
@@timc1928 you bet!
You da man!!! Thanks for the video!!
Glad to help!
i was asking questions cuz i made my own switch, and i hooked it up where you were showing you did it, i did not know that they wanted it hooked up to the front abs sensor, tomorrow ill take the whole thing apart again and see if hooking it up to the front makes the engine light go away. im assuming it will since they make no mention of the engine light and they would have used the rear connector too i assume they tried and figured out the front one has to be used to avoid the engine light.. or maybe the engine light is just part of the deal..
Those tires look awesome! Great video.
What do you think about the throttle feel of the Ibex? Is it smooth or choppy at in town speeds?
Thanks! Just recently installed these Dunlop Trailmax Raids. When I first got the Ibex it was a little jerky and had a tendency to lurch forward when downshifting at certain RPMs… that seems to have all smoothed out. It has an occasional hiccup at like 4K sometimes but not all the time. My current issue is the quickshfter doesn’t want to shift past 4th gear. I’m sure that will sort itself out someday too 😅
Have you tried to recalibrate the ECU input with the throttle yet?
When using the ABS killswitch have you had any issues with the quickshifter? It's not 100% of the time, but occasionally the quickshifter will stop working when I disable the ABS and it won't start working again until after a few key cycles.
What airbox cover is that?
@@navvet1525 Throttle Punks
did this deactivate both front and rear or only rear
does this cause the engine light to come on.
This actually just started happening for me. I'm going to try and disconnect the battery and then reconnect and see if that wipes the code. The installation instructions for this switch tells you to install on the front sensor so I'm wondering if that would make a difference... It does work in disabling the ABS though!
@JasonRidesmoto if you try it on the front and the engine light doesnt come please let us know...so the directions actually say to connect it in line with the front abs ..i want to get one but mot if the engine light comes on
@JasonRidesmoto btw i thinks its 5 or 6 ignition cycles and the engine light will go out