Small waves, no. Ripples yes. By wave i mean 1 to 2 foot swells is like a 20 foot swell to a full scale plane. So as long as waves arent breaking over the hull. Youll be fine.
You stated to add some glue to the underside of the horizontal stab and the front bottom of the vertical. Why exactly? And what glue do you recommend? Obviously it has to be safe for use on this kind of foam. What servos does this come with? In my experience, these kind of ARFs generally have the crapiest chinese servos they could find. What do you think of these? Thanks.
Any glue, could use foam safe CA, foamtac, it doesnt matter, as long as its safe for foam. I use welders. I have all info in the description, 9g splash proof it says. Ive never had an issue. My draco has had 3 out of 4 wing servos fail... :)
Thanks for the great build video John. Would you mind posting a detailed step by step of what you did on your transmitter once you hooked up your two throttle leads to the receiver ? Thanks John !
Hy , where have you placed the receiver? I have (when finihed) to take up the wing for transport and there are so much wires :-( to connect. Can you help me please? Regards Michael
As I prepare for the arrival of my Albatross (Fed Ex says day after Mardi Gras), I have a question/concern. It appears that Avios wants you to power the receiver with the connector(s) from both ESCs (Y'd together I am guessing). But I was always told separate the ESCs and that they will fight each other and cause a failure. I could just use a Castle Creations ESC. What do you guys recommend??? Thanks.
Both my Albys are setup by the book, one esc power wire (the + ) wont be connected, for that very reason, only one esc will power your receiver that way. Zero issues out of the box on these.
Nice video, I love this model. Can you tell me which kind of decals are on this plane? Are they selfadhesive or need iron intstallation? Are they fix correctly or come off easily? Thanks in advance!
I still have the version one new and box, because I been flying Inav fpv planes and ducted fans, but when I see this one I said, click it and buy it, or you will be sorry later in winter, so here we go, the plane is so nice, got the twin king and I have mix opinion, specially because I have to spend extra 50 dollars to replace the garbage nose gear, so still new in box. But this one look so sexy, like the Petrincic Bros said, lol OOOO HHHH Yeaaaaaa. Plus I like the new access to the esc through the nacelles.
Really like the airplane think you'll be my next one The Price is Right to good review John PS we out of our City airport we had a full-scale one pretty good-sized airplane
Easy, just have to mix the rudder one direction to one motor, other direction to the other motor, I may do it to mine for taxiing on grass to make it easier with a cross wind.
Does hobby king send all you guys the same plane? HK channel just introduced this plane , The Petrinčič Bros is doing a unbox Now you I wonder who is next? 🤔
Mine arrived Monday. Two out of three hinges on the left flap were detached. Avios saved a bit on glue. First step in my build is Foam Tac. LOL.
When the water is a bit rough, by rough I mean ripple or small waves. Will it handle it?
Small waves, no. Ripples yes.
By wave i mean 1 to 2 foot swells is like a 20 foot swell to a full scale plane.
So as long as waves arent breaking over the hull. Youll be fine.
Thank you
You stated to add some glue to the underside of the horizontal stab and the front bottom of the vertical. Why exactly? And what glue do you recommend? Obviously it has to be safe for use on this kind of foam. What servos does this come with? In my experience, these kind of ARFs generally have the crapiest chinese servos they could find. What do you think of these? Thanks.
Any glue, could use foam safe CA, foamtac, it doesnt matter, as long as its safe for foam. I use welders. I have all info in the description, 9g splash proof it says. Ive never had an issue. My draco has had 3 out of 4 wing servos fail... :)
Thanks for the great build video John. Would you mind posting a detailed step by step of what you did on your transmitter once you hooked up your two throttle leads to the receiver ? Thanks John !
Thanks, I just mixed one channel to another so both work the same.
I bought a V2, it is on its way! What battery connector comes attached to these ESCs? Thanks John!
XT60 connector. Thank you!
Inst. say there is slight dihedral in green wing connectors. I can not see that. Is there?
Love this model, and new scheme is sweet!!! Way to go Avios👊🏼👊🏼👊🏼
Yeah buddy!
Hy , where have you placed the receiver? I have (when finihed) to take up the wing for transport and there are so much wires :-( to connect. Can you help me please? Regards Michael
@07:31 I say exactly where it is
@@JohnVHRC Sorry my english is not so good, but with your help everything is ok! Thank you very much :-)
As I prepare for the arrival of my Albatross (Fed Ex says day after Mardi Gras), I have a question/concern. It appears that Avios wants you to power the receiver with the connector(s) from both ESCs (Y'd together I am guessing). But I was always told separate the ESCs and that they will fight each other and cause a failure. I could just use a Castle Creations ESC. What do you guys recommend??? Thanks.
Both my Albys are setup by the book, one esc power wire (the + ) wont be connected, for that very reason, only one esc will power your receiver that way. Zero issues out of the box on these.
@@JohnVHRC Thanks John. I presume that you have not had any problems flying it this way, right? Thanks again.
@@markwoketman6808 both still working as good as day 1! Its a normal way to run two esc's.
Nice video, I love this model. Can you tell me which kind of decals are on this plane? Are they selfadhesive or need iron intstallation? Are they fix correctly or come off easily?
Thanks in advance!
Im honestly not sure, sorry, have to ask Stewart.
This version looks really nice. I do have to say that I liked the first one too. Good stuff John.
Nice job Avios.
AirHammer out!!
Thanks!
Nice unboxing as always. It look like Hobby King is stepping up their game.
Thanks! Yes they are!
Wish they had a CHALKS airlines color scheme as i worked for them. They at one time were the oldiest airline in the usa. Out of the bis over 25 yrs
What's the battery connector 60 or 90?
What c rating on battery do you use?
60, You could probably use lower C ratings on this and be ok. But I think I show the battery in the flying videos
Hey John....nice job. I have the original one and it's a great flyer....lot of fun.
Thanks! Me too!
I still have the version one new and box, because I been flying Inav fpv planes and ducted fans, but when I see this one I said, click it and buy it, or you will be sorry later in winter, so here we go, the plane is so nice, got the twin king and I have mix opinion, specially because I have to spend extra 50 dollars to replace the garbage nose gear, so still new in box. But this one look so sexy, like the Petrincic Bros said, lol OOOO HHHH Yeaaaaaa. Plus I like the new access to the esc through the nacelles.
Awesome!
That does look good 👍 nice scheme change...
Yeah, I really like it!
Both of my throttle leads are plugged into a Y harness that has a label marked "Rev" at the male end of the connector. Can you give me some guidance?
You sure that’s not the reversing lead?
@@JohnVHRC It was attached to the two throttle leads.
Really like the airplane think you'll be my next one The Price is Right to good review John PS we out of our City airport we had a full-scale one pretty good-sized airplane
Cool, never seen a full scale, that would be amazing!
Good price?
Lmfao
sure looks nice...have a great maiden....
Thanks, hopefully soon!
V2 looks orsum, should be a great flight 👍🏻
I think so, excited to try it!
How difficult would it be to setup differential thrust on this?
Easy, just have to mix the rudder one direction to one motor, other direction to the other motor, I may do it to mine for taxiing on grass to make it easier with a cross wind.
Youll need another channel on the receiver.
Pretty sweet. 👍
Yeah buddy!
get on with it.. we know... good
Does hobby king send all you guys the same plane? HK channel just introduced this plane , The Petrinčič Bros is doing a unbox
Now you I wonder who is next? 🤔
Haha, I dont think youll see any others
Yeah. All the youtubers get one early to sell it to us.
Hola amigo, interesante ese modelo. Muy buen video.
Thank you Andres!
The price makes no sense on any of these planes lately.
These are foam.
This isnt carbon fiber and unobtainium.
No, just no.
👍😊
:D