For more information or to purchase a set of PRO Design TRM Style Wing, check out our web page for details: www.procivic.com/p/m/civic/pro-design-trm-style-spoiler-wing.html?+design+trm+style+spoiler+wing+comment
It is actually pretty sturdy. The stock one wobbles too. See this quick clip I just found (and this guy was being gentle): ruclips.net/video/WAZCovjDr-0/видео.html You'll still get the downforce benefit because at high speed more pressure will be put on the spoiler to flex downward as much as it can, and then it will transmit the extra force to the chassis through the side pillars. If Honda wanted near zero flex they would have designed the factory wing differently, maybe with a center pillar (but then that would obstruct the driver's rear view).
I saw it also...it is mainly because they don't use the pre drilled factory holes on the inside of the trunk lid...they should have use longer bolts to mount the spoiler to the trunk.
I want to buy this type r spoiler will it come with a template on where to drill the holes in the hatch an also do I have to do any drilling on the spoiler or is it already pre drilled an ready to go?
My bracket on the right side have a crack. Do you guys have a stronger piece bracket? and if I’m going to replace it, can I just take the 6 screws on the right side and put on the new one? Or I would have to re-install the whole wing?
You dont recommend that there should be weather stripping between the components or between the spoiler and the car? (wheres the part number that was supposed to be in the comments?)
I apologize for the slight oversight. We do include a gasket with the wing. You can see us mounting it at 4:05 and is notated to include it on our product description on our site. The part number has been updated on the description and is: 74828-TGG-A01, 74829-TGG-A01
Do you have in your stock the one that you installed on this video ?It comes with a steel brackets right and will it be compatible with my 2019 hatchback? I would like to purchase one.
I apologize for the slight oversight, but we do include a gasket with the wing. You can see us mounting it at 4:05 and is notated to include it on our product description on our site.
That's great looking spoiler I'm searching for my 2017 Honda Civic Hatchback Sport Touring; but there 1 question for this wing is do you have Sonic Gray Pearl for this TRM style wing spoiler for Hatchback? Because my hatchback color is Sonic Gray Pearl.
Just received my spoiler, I wanted to test fit the spoiler before painting it, but the screws that come with the spoiler are too short. I’ll either sand down the parts closest to the holes or just get longer screws.
For more information or to purchase a set of PRO Design TRM Style Wing, check out our web page for details: www.procivic.com/p/m/civic/pro-design-trm-style-spoiler-wing.html?+design+trm+style+spoiler+wing+comment
That wobble at 5:53 is real. I'm afraid it would have crazy flexing on the highway
It is actually pretty sturdy. The stock one wobbles too. See this quick clip I just found (and this guy was being gentle): ruclips.net/video/WAZCovjDr-0/видео.html
You'll still get the downforce benefit because at high speed more pressure will be put on the spoiler to flex downward as much as it can, and then it will transmit the extra force to the chassis through the side pillars.
If Honda wanted near zero flex they would have designed the factory wing differently, maybe with a center pillar (but then that would obstruct the driver's rear view).
.
I saw it also...it is mainly because they don't use the pre drilled factory holes on the inside of the trunk lid...they should have use longer bolts to mount the spoiler to the trunk.
Can we just drive to your shop and have you guys install it🤔
SAME. where is this guy located
Good job 👍🏽 Rudy Kevs Hatch came out looking clean with that spoiler 👌🏽
Thanks for the comment! Glad you enjoyed the video.
Rudy has been eating good!
I want to buy this type r spoiler will it come with a template on where to drill the holes in the hatch an also do I have to do any drilling on the spoiler or is it already pre drilled an ready to go?
Came with a template. No drilling on the spoiler it self only on the hatchback of the car. No freeken instructions
Why not use the smaller factory drilled holes on the brace of the hatchback? Is the spoiler smaller and won't fit on the original mounting holes?
My bracket on the right side have a crack. Do you guys have a stronger piece bracket? and if I’m going to replace it, can I just take the 6 screws on the right side and put on the new one? Or I would have to re-install the whole wing?
Is there a video to show step by step to put the pieces of spoiler together?
excuse me do you have the instruction of which screws goes where? I think I am missing bolts and screws please and thank you
U has vibration problems on the road over 80 mph?
Drill a hole ? Any info on that for rust prevention afterwords?
You dont recommend that there should be weather stripping between the components or between the spoiler and the car? (wheres the part number that was supposed to be in the comments?)
I apologize for the slight oversight. We do include a gasket with the wing. You can see us mounting it at 4:05 and is notated to include it on our product description on our site. The part number has been updated on the description and is: 74828-TGG-A01, 74829-TGG-A01
Is there any way to put up a link to the template?
Cool!
Your Wing is twerking at 5:53 😂
Do you have in your stock the one that you installed on this video ?It comes with a steel brackets right and will it be compatible with my 2019 hatchback? I would like to purchase one.
The wing arrives with all the hardware shown in the videos. We currently have plenty of these in stock and ready to go.
Do you have the product link for the diffuser?
No gaskets to stop vibration or water going into the holes you drilled?
I apologize for the slight oversight, but we do include a gasket with the wing. You can see us mounting it at 4:05 and is notated to include it on our product description on our site.
Does this come with all the screws you need? Ive seen videos of people installing the wing but saying it didnt come with some screws
This kit includes all the hardware required to install it. All hardware shown here will be included.
Do you by chance know the mm size for the bolts that bolt the whole spoiler on to the hatch?
It’s already bouncing around and flexing at 5:53 with hardly any force. Can this really provide downforce at higher speeds if it flexes that much?
Does anyone know all the screw sizes needed to install the spoiler. I lost the hardware and need to buy them at the store now. Pls let me know.
When are you guys going to have them in stock again ????
That's great looking spoiler I'm searching for my 2017 Honda Civic Hatchback Sport Touring; but there 1 question for this wing is do you have Sonic Gray Pearl for this TRM style wing spoiler for Hatchback? Because my hatchback color is Sonic Gray Pearl.
xtariz dranix You’d have to go into a shop & have them paint it the exact color of your car.
The wings come unpainted. You will have to have it painted to your specific color on arrival.
I hope you know that Perl is ridiculously expensive it's a tricoat paint I'm getting mine gloss black to match my black trim
Hello, does anyone know if the spoiler fits the fk NON type R uk prefacelift version?? Year 2015
I need a template to installation where should I get it?
What's the part number for the bump stoppers? I can't find it lol
Stopper, R Tailgate
Part # 74828-TGG-A01
Stopper, L Tailgate
Part # 74829-TGG-A01
any vibration sound while driving?
Is that a full size type r spoiler?
You never linked the one time use part!
Are you guys shipped outside of the U.S? I live in Canada
We do ship to Canada!
Just received my spoiler, I wanted to test fit the spoiler before painting it, but the screws that come with the spoiler are too short.
I’ll either sand down the parts closest to the holes or just get longer screws.
Are you able to email us directly for further assistance? We'll be happy to help if there is some issue.
Is that the same size ?
where can I get the tailgate stopper?
👍
Hi procar do u have phase 2 strut bar?
Please email or call us directly for stock checks on our products..
Can you get instructions?
Can you help me install one on my car too? 😄🙌🏼
I want a lip bumper for my civic hatch sport
Don King Honda sells the type r lip directly from the factory it’s only 154$ and then whatever tax after so round to like 170$
@@SirYeaouschAlot I'll be pain to install it with the sport lip on.
will this fit the 2019 honda civic ex?
As long as it is the hatchback model, it will fit.
That nice cant be fitted on a honda civic sport sedan
Mannnn could you work on my car 😂 I don’t trust my self 😅
ramathorn
Wow! Avoid this. It's not a 1:1 replica of a type R spoiler. It doesn't mount in the oem placement. That's 10x more wobble than normal
Where can I get the template?
Comes with the spoiler it self