I love how you overlapped the waves on the shore, it looks so authentic, like a real beach front. A beautiful nice calm beach front, I love it ❤️. Thank you so much for you time. 👍🏼❤️
Thank you for sharing! After spending weeks scouring RUclips for inspiration on my first oceanscape, I can say you have THE BEST wave technique. So realistic. Beautiful artistry!
Thank you Tiffany! I'm sure you'll create some beautiful pieces. Power is in your will! Learning through trial and error has always been my best technique!
Well done! The art and the craft required to do such beautiful work are at such a high level. I love the way the colors flow around the edges of the panel so no picture frame is required. It’s one of the things that sets your work apart.
Love your art and great to see that Huntington Beach has inspired you as it has to me and my family a few years ago during our holiday in California. We live on the Gold Coast, Australia. Perhaps our Beaches here can also inspire you💜🙏. Thank you for sharing your beautiful work.
Самое настоящее море из всех, которые я видела👍👍👍🤗Очень натурально и красиво. Скажите пожалуйста, Вы даёте смоле настояться, загустеть перед тем, как делать волны? 🤗
No words just wow how beautifully and easily you work happy for you when you painted the wood with ocean colours what acrylic paint you used and what did you mixed to it to brush over your wood panel Thank you for your time
Hi, excellent piece and video. Just a question, when you're adding the white resin at 5.03m, have you left the resin after mixing to thicken before using? I'm finding that my resin is too fluid so just moves as a blob rather than separating into strands (likes yours does) when applying the heat gun. Would welcome any advice. Many thanks. David
It is about trial and error numerous times to get your prefered brand of resin act as you wish. I use brand “Art Resin” which is not too fluid, just as I like it. If yours is too fluid, experiment with waiting a bit before pouring it down. It is hard to put in words, just try and never give up 💪
hey amazing work . I had a question. if you can pls help me understand. for the waves , i usually do we need to wait for the clear layer and white resin to thicken for 15-20 mins ? and then begin with the heat gun ??
This is really nice. I have a few questions for you. If I go with your multi-layer for a tabletop do I need to build a frame around to fill evenly resin where you have the wave foam on the sand. Currently shown that sand has a low point than the wave. Secondly, I notice you have a lot of action (waves) in deep water (deep blue area).
Could you do a video on how you build your boards and prep them. I love the way they have turned out a d I’m still learning to make them myself. The k you Rasko.
Hi, I'm completely in love with your work. It's perfect. I have a question, is this resin high viscosity? I'm from Brazil and I use low viscosity but the waiting time is too long.. anyway, your work is amazing, congratulations
Beautiful work. Do you mix the white pigment with resin or just use the pigment as is? I didn’t see any resin in the cup into which you poured the white. Thanks
I didn’t think you could use acrylic paint with epoxy?? I’ve been doing my bathroom vanities, but I just love this. I live inFlorida, so this would be perfect. Very beautiful. TFS
Lovely work! Quick question if I may. I'm making a similar project but my project does not have a frame; it is solid epoxy (with a couple of strips of wood inside). I'm at a loss about how to hang it. I'll have to attach something directly to the back side. Screws? Nails? Any ideas? Thanks
You may have to find a couple spots on the back to drill a couple holes in that will fit over screws in the wall. (Of course that may not be an option if the entire piece is translucent)
I’m so sorry for late reply. I simply overlooked your comment 😳 You need to drill directly into epoxy from the back and install some hanging hardware. Keep in mind that epoxy is very heavy, so anything you do, it has to be strong. If the project is very translucent, screws will be visible from front side…
Hi, I´m wondering what do you use in video for painting, I mean you use epoxy resin, but what kind of colors do you use, probably not normal colors for paper painting? So I would like to know what kind of colors and where did you get them, cause I really admire this art and I would like to do it myself.
Is that heat gun the1800 watt model and do you use the high setting to blow the waves?Is the heat cranked on the heat gun?I am trying to research what heat gun to buy.What would you recommend?I've had so many failures with my setup that I'm getting a little discouraged. You do very beautiful work,it must be quite satisfying.
Thank you Steve. It doesn't matter what kind of heat gun you use. It can be done with all of them - just you have to find your approach. I usually use heat on around medium setting - never to hot. Blowtorch is also essential since that extra high temperature makes those little cells. But you have to work quick with it and never overdo the piece. Remember less is more. If you knew how many pieces I've ruined before I found my way of doing this kind of art, you'd be amazed I didn't quit long time ago. There is no "recipe", it is just learning by trial and error, working hard, and never give up! Good luck!
Thank you. There are some pieces from Lost Icons series available. Please check them out on my website: www.rasko.eu/product-category/original-art/lost-icons-series/
I am in Croatia atm and am looking for a surface I could buy ready for such a large resin painting. Any chance you could recommend something? I searched in hardwood stores but the wood I bought warped.
Yeah, the wood tends to warp. It is alive material and will always "breathe" a little from season to season. You can minimize warping with a few coats of sealer such as GOLDEN or Liquitex Medium (mate or gloss, doesn't matter), and only than primer it with gesso. Someone recommended me XPS foam as a surface for resin art, but I haven't tried it yet. So I can't tell if that works well. It is very dense and not alive material, so it makes sence and I think it shouldn't sag.
@@raskofineart Thank you so much for the reply. I'll look into all of those tips! The last surface I tried pouring resin on is literally a nice uncut counter top from IKEA that I had unused! Hahah it is great size and it didn't warp about anything, but super glossy so the resin didn't distribute perfectly. I didn't prime it well, I think that was the problem.
Y my resins layers gets mixed? Do u wait for each Colour to dry little bit then u apply the next Colour and same with the wave? Once I blow torch it, it gets worse and all gets watery and mixed
The overall effect is exciting ! Your efforts should be rewarded. For a more realistic scene, add some dark to your wet sand. Dry sand vs. Wet sand is never the same color. I.M.H.O.
Yes I am in located Ljubljana. I work from my home studio and sorry, but studio is a mess now. I'm working on a project and can't accept any guests. These videos are as close you can get 😁
Hi Tommy. It can be done, but take into account that the 3D gap between layers can make a glass somehow unstable. Maybe a leveling top coat wold solve this.
Thank you, but I don't speak Spanish. Maybe I'll make some Voice-over tutorials in the future, so that you can use RUclips Automatic translation function. Cheers! -> Google Translate: Gracias, pero no hablo español. Tal vez haga algunos tutoriales de voz en off en el futuro, para que pueda usar la función de traducción automática de RUclips. ¡Salud!
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Excellent...just Wow...looking real....you are matchless
Thank you so much 🙏
I love how you overlapped the waves on the shore, it looks so authentic, like a real beach front. A beautiful nice calm beach front, I love it ❤️. Thank you so much for you time. 👍🏼❤️
Thenk you for nice words Renda 🙏🏻
Thank you for sharing! After spending weeks scouring RUclips for inspiration on my first oceanscape, I can say you have THE BEST wave technique. So realistic. Beautiful artistry!
Thank you Tiffany! I'm sure you'll create some beautiful pieces. Power is in your will! Learning through trial and error has always been my best technique!
Very Very nice 👌 work my friend 👍 fantastic 👏
Thanks for the support.
Bravo sin, krasna predstavitev. Tvoj trud in vztrajnost rojevata sadove!
Hvala tata :)
Absolutely stunning , your art is truly exceptional 👌
Thank you so much Jane. It means a lot.
Well done! The art and the craft required to do such beautiful work are at such a high level. I love the way the colors flow around the edges of the panel so no picture frame is required. It’s one of the things that sets your work apart.
Kevin Thank you so much! 🙏🏻
Love this, just beautiful, thank you so much for sharing your art. I love that you build your own panels too! 🌟
Thank you Liz. Yes I love to work with wood also.
I'm in total awe in how beautiful your art is. Love love it! I'm new to the epoxy art and hope to be as good as you someday. Your truly amazing. 🇨🇦🤘😁
Thank you for your kind words. Just practice, practice... You can be anything you want :)
Excellent! That is really gorgeous. From Melbourne, Australia.
Lina Thank you!
Love it, an intimate knowledge of the ocean... absolutely stunning, and relaxing! ❤
Glad you enjoyed it!
Beautiful work! Love the blues 💙 and movement you created. Off to watch more of your videos! 👍🏻👏🏻
Thank you so much 😀 Sophie. I'll get to make some new videos soon.
I live on the eastern coast on Mt. Desert Island. Looks very real.
Thanks a lot ❤️
Ayuh
Great job!
Love your art and great to see that Huntington Beach has inspired you as it has to me and my family a few years ago during our holiday in California.
We live on the Gold Coast, Australia. Perhaps our Beaches here can also inspire you💜🙏. Thank you for sharing your beautiful work.
Giulietta, Thank you for your support. I'll take some Australian beaches as inspiration soon, for sure. 🙂
OMG!!!! Hermoso! Amazing! You are an artist in the whole meaning of the word!
WoW, Thank you so much 🙏 It really means a lot!
Very nice. I love how you built the frame. The art is amazing. Your video was so helpful to me.
Thank you! I'm happy my video helped you. Have fun creating 🤘
it’s so pretty and looks so realistic
Thank you Breckin. That was the the main intention... :)
very beautiful, love also the music, and hopefully i will be brave and go for a size like this some day.
Thank you! Just go for it, you can’t go to big with resin art ✨👍
WoW!!! Simply beautiful. 💙
The only flaw of this magnificent work is the scattered sand ☝🏻
Personal preference and style.
Super! I love it❤
I'm glad!
Beautiful outstanding this is what I call art
Thank you dear 🙏🏻
Great work man, and Great song selection. I love this song. Thank you
Thank you for your kind words 🙏🏻
Awesome 👌. I want to apprentice and step up my art game. That is impressive 👏
Thanx for the support 🙏🏻
Unbelievably gorgeous!
☺️👍
He is brilliant! Awesome art!
Great art work. I love it!
Thank you Viki.
Absolutely beautiful!
Thank you Judy.
Gorgeous work
how many days should we wait every between the layers? thank you so much.
Depends on your resin, but usually at least 24 hours before you move to working on next layer 👍
Восторг!!!😍😍😍🔥🔥🔥💐💐💐💐💐
Beautiful piece! Love it!
Thank you very much Anne!
So much fun to watch
Stunning work, love it
Thank you
Just Beautiful work !!!
Thank you Kelly 🙏🏻
Perfect !!!👏👏👏
🙏🏻🤘
That was beautiful! Loved it ❤️❤️❤️👏🏼👏🏼👏🏼
Thank you Dannette 🙏🏻
Espetacular 👏👏👏👏
Gracias 🙏🏻
MASTERPIECE
Thank you Carolina 🙏
You’re bad Dude bro!!!! That’s beautiful
Thanks mate. Details matter...
Happy to find your channel. Beautiful art. :)
Thanks a lot Marika 🙏🏻
Que perfeição ❤ oceano
Самое настоящее море из всех, которые я видела👍👍👍🤗Очень натурально и красиво. Скажите пожалуйста, Вы даёте смоле настояться, загустеть перед тем, как делать волны? 🤗
Yes, like I describe in a video, I always work in layers. Each layers has to dry before I continue with another layer.
@@raskofineart спасибо большое 🤗👍👍👍
Beautiful.
Very cool!
😍😍wow this is so beautiful i cant wait to make stuff like this once i get my materials
Good luck! Just have fun 😃
@@raskofineart thankss i will!!!
Beautiful! U did that. Thank u
Thank you 🙏🏻
No words just wow how beautifully and easily you work happy for you when you painted the wood with ocean colours what acrylic paint you used and what did you mixed to it to brush over your wood panel
Thank you for your time
Please listen and watch my other videos. I answer all of your questions :)
amazing video
Thanks for the support 🙏🏻
So realistic
Thank you 🙏
Bellooooo❤❤❤
Hi, excellent piece and video. Just a question, when you're adding the white resin at 5.03m, have you left the resin after mixing to thicken before using? I'm finding that my resin is too fluid so just moves as a blob rather than separating into strands (likes yours does) when applying the heat gun. Would welcome any advice. Many thanks.
David
It is about trial and error numerous times to get your prefered brand of resin act as you wish. I use brand “Art Resin” which is not too fluid, just as I like it. If yours is too fluid, experiment with waiting a bit before pouring it down. It is hard to put in words, just try and never give up 💪
hey amazing work . I had a question. if you can pls help me understand.
for the waves , i usually do we need to wait for the clear layer and white resin to thicken for 15-20 mins ? and then begin with the heat gun ??
Thank you. It depends on the resin you use. I use Art Resin and I always do it right away. I don’t wait…
This is sick I wish I was ablento fo something like that
You can :). I made a ton of mistakes and threw away many pieces before I “mastered” my technique of making aerial seascapes.
Prachtig, ik vind dit zeer knap en mooi gedaan 🥰👍je bent een groot kunstenaar 👨🎨 🖼 👏😌 (Lydia uit Antwerpen)
Thank you Lydia 🙏🏻
This is really nice. I have a few questions for you. If I go with your multi-layer for a tabletop do I need to build a frame around to fill evenly resin where you have the wave foam on the sand. Currently shown that sand has a low point than the wave. Secondly, I notice you have a lot of action (waves) in deep water (deep blue area).
I believe for your case it would be the best to build frame around the piece and remove it when finished. But edges would have to be polished later.
Could you do a video on how you build your boards and prep them. I love the way they have turned out a d I’m still learning to make them myself. The k you Rasko.
Hi. Maybe I will…
I would love to see the backside of your pieces. Nothing I’ve tried seems to work in preventing unsightly dribbles around the back edges of my works.
Can I ask you what you mix your heavy body acrylic colors with when you paint the sand and water prior to the resin.
🇨🇦😊
I mix it with resin also. All layers are made with tinted resin.
Stunning. I know you use the fluid acrylic for the white. What kind of golden products did you mix in the blues?
I use GOLDEN High Flow series of paints and mix all sort of blues and greens to get the desired tint.
Do you sand lightly between layers? Your work is just amazing! I’m such a fan! ❤️
Actually when building waves, I don’t! 👍
Did you mix the white with resin b4 adding to the table piece? Or did you put the white paint straight on the resin?
Thank you
Hi Tina. I always mix paint into the resin b4 applying it to the piece.
@@raskofineart thank you👍
Meraviglioso! Quanto tempo passa dal primo strato? Aspetti che asciughi la,resina per poi poter mettere altri strati sia di colore che di bianco?
Yes. Layers must dry. See my other videos to see how I work.
Thank you very much.. which kind of wood you prefer?
I use Birch plywood for main surface and Spruce slats for the edges.
👏👏👏👏👏 perfeito.
Dobro opravljeno, prijatelj! pozdrav iz Bolgarije
много ти благодаря за подкрепата на приятеля ми 🙏
Hi, I'm completely in love with your work. It's perfect. I have a question, is this resin high viscosity? I'm from Brazil and I use low viscosity but the waiting time is too long.. anyway, your work is amazing, congratulations
Hi. Thanks for the support 🙏🏻. I use high viscosity resin, my favourite brand is “Art Resin”. 🫶
@@raskofineart thank you so much!!!
Beautiful, how many coats of resin did you put on,
I think 4 or five
Beautiful work. Do you mix the white pigment with resin or just use the pigment as is? I didn’t see any resin in the cup into which you poured the white. Thanks
Thank you Peter. I always mix paint with resin 👍.
@@raskofineart ok. Thankyou.
You’re welcome.
I didn’t think you could use acrylic paint with epoxy?? I’ve been doing my bathroom vanities, but I just love this. I live inFlorida, so this would be perfect. Very beautiful. TFS
Yes you can use acrylic paint with epoxy, you just have to use highly pigmented high quality paints, not the "hobby" ones. Good luck!
Lovely work! Quick question if I may. I'm making a similar project but my project does not have a frame; it is solid epoxy (with a couple of strips of wood inside). I'm at a loss about how to hang it. I'll have to attach something directly to the back side. Screws? Nails? Any ideas? Thanks
You may have to find a couple spots on the back to drill a couple holes in that will fit over screws in the wall.
(Of course that may not be an option if the entire piece is translucent)
I’m so sorry for late reply. I simply overlooked your comment 😳
You need to drill directly into epoxy from the back and install some hanging hardware. Keep in mind that epoxy is very heavy, so anything you do, it has to be strong. If the project is very translucent, screws will be visible from front side…
Maybe this is even a better suggestion. 👍🤘
VERY NICE... I WISH I COULD DO THIS
You can. Just try until you make it even better 🫶
what wood did you use?
nice work, congratulations.
hugs
Brazil ✌🏼🇧🇷
I use Birch plywood.
Beautiful! I want to buy it!
Thank you! Unfortunately this one was sold long time ago. But I have some resin art seascapes left. Check out my website: www.rasko.eu
We’re making a coffee table for our friends. This is exactly what we’re shooting for. I hope it turns out this good!
Thank you Wayne. I hope your coffee table turns out the way you want 🙂
This man is an artist. You can't just watch a tutorial and think u can create something of this caliber. Good luck😁
Hi, I´m wondering what do you use in video for painting, I mean you use epoxy resin, but what kind of colors do you use, probably not normal colors for paper painting?
So I would like to know what kind of colors and where did you get them, cause I really admire this art and I would like to do it myself.
Hi Izak. I use Art resin and High flow acrylics from “Golden” for ocean and heavy body acrylics for the underpainting.
@@raskofineart thank you for answering, really appreciate and admire your work
Is that heat gun the1800 watt model and do you use the high setting to blow the waves?Is the heat cranked on the heat gun?I am trying to research what heat gun to buy.What would you recommend?I've had so many failures with my setup that I'm getting a little discouraged. You do very beautiful work,it must be quite satisfying.
Thank you Steve. It doesn't matter what kind of heat gun you use. It can be done with all of them - just you have to find your approach. I usually use heat on around medium setting - never to hot. Blowtorch is also essential since that extra high temperature makes those little cells. But you have to work quick with it and never overdo the piece. Remember less is more. If you knew how many pieces I've ruined before I found my way of doing this kind of art, you'd be amazed I didn't quit long time ago. There is no "recipe", it is just learning by trial and error, working hard, and never give up! Good luck!
@@raskofineart Do you use the heat gun for drying and making cells? Do you use a torch and if yes why?
@@ntaylor1144 Blowtorch makes little cells since it operates with higher temperature. Check my other videos, I explain the procedure…
Hey can one use normal hair dryer with nosel attached to it as heat gun?
I tried, but results were not so good since hair dryer operates with lower temperature@@manasvi2758
Nice 1. Which material did use for wight pigment?
It is Golden Fluid acrylics white, mixed with Art resin epoxy.
@@raskofineart titanium white?
Yes, Titanium white by GOLDEN Fluid acrylics.
Do you blow the waves with just air or with the heat on too?? Thanks
With Heatgun and Blowtorch. I is the temperature that makes the difference in lacing effect.
The white for waves is mixed with resin?
Yes, correct.
Muito top gostei❤
Thank you
Beautiful ❤Is it on canvas?
Thank you. I paint on wooden panels. Large canvases tend to sag and all resin gets in the middle.
How much time do you allow between different layers of waves? Thanks.
Depends on the resin brand and type. I wait at least 24 hours for the type of resin that I use (Art Resin).
Perfect. What does something like this cost if I were to buy
Thank you. There are some pieces from Lost Icons series available. Please check them out on my website: www.rasko.eu/product-category/original-art/lost-icons-series/
Great.
Thanks!
Dónde puedo conseguir o comprar la Recina y los Exprais o Los picmentos
You can ask in your local art store, or search on google for local art store.
I am in Croatia atm and am looking for a surface I could buy ready for such a large resin painting. Any chance you could recommend something? I searched in hardwood stores but the wood I bought warped.
Yeah, the wood tends to warp. It is alive material and will always "breathe" a little from season to season. You can minimize warping with a few coats of sealer such as GOLDEN or Liquitex Medium (mate or gloss, doesn't matter), and only than primer it with gesso. Someone recommended me XPS foam as a surface for resin art, but I haven't tried it yet. So I can't tell if that works well. It is very dense and not alive material, so it makes sence and I think it shouldn't sag.
@@raskofineart Thank you so much for the reply. I'll look into all of those tips!
The last surface I tried pouring resin on is literally a nice uncut counter top from IKEA that I had unused! Hahah it is great size and it didn't warp about anything, but super glossy so the resin didn't distribute perfectly. I didn't prime it well, I think that was the problem.
Y my resins layers gets mixed? Do u wait for each Colour to dry little bit then u apply the next Colour and same with the wave? Once I blow torch it, it gets worse and all gets watery and mixed
There are multiple layers of waves. Watch some other my videos 👍
The overall effect is exciting ! Your efforts should be rewarded. For a more realistic scene, add some dark to your wet sand. Dry sand vs. Wet sand is never the same color. I.M.H.O.
It is art, and it can be presented in many ways. Thanks for your feedback.
Is he using straight up white acrylic paint for waves?
I use GOLDEN High Flow Acrylics or GOLDEN Fluid acrylics - Titanium white, all mixed with resin.
sick im going to try now... lol mines going to look like shit.
it takes me there....
Hi if I may ask how much do you sell a painting for like the one you made...
Katja, you can find all the prices on my website: www.rasko.eu
Are you in Ljubljana? I love the work and would love to visit your studio! :) I am here to learn as I am planning to create one for myself.
Yes I am in located Ljubljana. I work from my home studio and sorry, but studio is a mess now. I'm working on a project and can't accept any guests. These videos are as close you can get 😁
@@raskofineart Ok. :) I understand! I love the music in your videos btw.
How do u mix the white for the waves ??
I describe this in my other videos in detail... Check them out :)
what paint colors did you use ? Thank you
I used GOLDEN High flow acrylics mixed with Art Resin. Look at 0:49
what did you use for the waves
Please watch a few of my videos. I explain everything… 👍
Do you have any problems with bubbles?
No, I don’t. The key is to double seal and double gesso your wooden board prior using resin.
Can it be done on counter tops to
Hi Tommy. It can be done, but take into account that the 3D gap between layers can make a glass somehow unstable. Maybe a leveling top coat wold solve this.
Muy lindo su trabajo .. pero hubiese de poner subtítulos en español... Saludos
Thank you, but I don't speak Spanish. Maybe I'll make some Voice-over tutorials in the future, so that you can use RUclips Automatic translation function. Cheers!
-> Google Translate: Gracias, pero no hablo español. Tal vez haga algunos tutoriales de voz en off en el futuro, para que pueda usar la función de traducción automática de RUclips. ¡Salud!