I've gone from a 2002 Silverado, to a 2022 Frontier with all the bells and whistles. There's so much stuff now 😮. I feel like I've gone back to school.
Thanks. I put the car tech stuff on here but to actually see me wheeling the truck those videos are on youtube.com/@netcruzercars channel. Check it out! Enjoy your truck. :)
Good video, so thanks…. I have exactly the same vehicle. You did make one error however… what you said what the water temp. gauge is actually the transmission fluid temperature gauge.
It's kind of useless anyway since it doesn't display any actual values. Seems odd since they went to the trouble of installing sensors but don't provide useful detail.
@@dlg5485 I think it's still useful because I know what the normal position on the gauge is after the warm up time... if it became unusually high, I would know.
I’ve not tested that. I always press the lock when walking away (on handle or key fob). However, If you unlock, and don’t open a door within 30 seconds or so, it will relock.
I didn't know the Pro4x had driver alertness monitoring, unless it's just a Canadian thing (I'm in the US). My Subaru Outback has a similar system and I really like it because I work nights and often drive home exhausted. I'm picking up my 2023 Pro4x tomorrow (my 3rd Frontier) and I'm pretty excited to have a truck again.
I’m not sure what it looks for as it doesn’t have an eye tracker, seems to be based on steering or throttle inputs. It seems to tell me “take a break?” during long hwy stretches, not when im driving tired.
@@netcruzerAccording to the manual it's just monitoring driver inputs, which is certainly less advanced that Subaru's system, but it should provide some security on those long late night drives.
💩 I wish there was a way to turn the driving lights off on the lower part of the bumper when you’re parked with your engine running they are always on. I wish there was a way to turn them off. I’m thinking about disconnecting those lights removing the plug. Don’t see a switch on my truck to be able to turn them completely off. 💩
Lock for the headlight relay, buy I electric switch in Nissan Dealer (around $ 20.00), install the switch in the free spot on the left side, run two cable to the switch and jump the power to the switch. Around the 3 hrs job, if you want to like professional
The cruise is awful for hills, way too crazy at downshifting 5 gears to gain 1 MPH. I've found you an just apply light throttle pressure when climbing using cruise, it'll avoid all the transmission drops and revving and just slowly get back up to speed, add throttle before the cruise kickdowns happens then let off when up to set speed. That's how it should be tuned but no luck at an update yet
I have this vehicle. All these functions are junk. Very glitchy. Especially the locking mechanisms. Won't lock or unlock at times. Save your money buy an American car
If you are having locking issues make sure your door physical locking toggle rocker on the door card isn’t halfway between lock and unlock. If that is not all the way open or closed it causes problems with the electronic lock actuators. Once I figured that out my remote locking has been reliable. That rocker is totally redundant and I see no need for it.
Excellent. Just bought a 2024. Just slow down a little bit so people like me that are in their '60s can understand exactly what's going on ❤️
I've gone from a 2002 Silverado, to a 2022 Frontier with all the bells and whistles. There's so much stuff now 😮. I feel like I've gone back to school.
What a great video. No other reviews go into so mich depth. I bought the same truck 2 weeks ago.
Thanks. I put the car tech stuff on here but to actually see me wheeling the truck those videos are on youtube.com/@netcruzercars channel. Check it out! Enjoy your truck. :)
Good video, so thanks…. I have exactly the same vehicle. You did make one error however… what you said what the water temp. gauge is actually the transmission fluid temperature gauge.
It's kind of useless anyway since it doesn't display any actual values. Seems odd since they went to the trouble of installing sensors but don't provide useful detail.
@@dlg5485 I think it's still useful because I know what the normal position on the gauge is after the warm up time... if it became unusually high, I would know.
Wish there was more than 1 trip odometer. My 2013 model did and I used 1 for tank mileage and another for oil life
There is. I do that. Trip reset button cycles between ODO, Trip A, Trip B. Hold to clear on A or B.
How do you turn on the display without starting the engine? And is there a way to display the ambient temp on the infotainment screen? Thanks!
how do you insert aux. gauges into the gauges?
good share bruh!
larry
Will the truck automatically lock the doors if the engine is off and you leave the vehicle and walk away or do you have to manually lock the doors?
I’ve not tested that. I always press the lock when walking away (on handle or key fob). However, If you unlock, and don’t open a door within 30 seconds or so, it will relock.
ok, thanks@@netcruzer
Too freaking fast why ,very knowledgeable but we all failed 🤪 i had a math teacher like you back in high school we all fail the last year text 😂
How to turn on gear display
Do you still have the R?
Yes! 😁👍
@@netcruzer Nice! I'm glad you do! Your tubes are great
I didn't know the Pro4x had driver alertness monitoring, unless it's just a Canadian thing (I'm in the US). My Subaru Outback has a similar system and I really like it because I work nights and often drive home exhausted. I'm picking up my 2023 Pro4x tomorrow (my 3rd Frontier) and I'm pretty excited to have a truck again.
I’m not sure what it looks for as it doesn’t have an eye tracker, seems to be based on steering or throttle inputs. It seems to tell me “take a break?” during long hwy stretches, not when im driving tired.
@@netcruzerAccording to the manual it's just monitoring driver inputs, which is certainly less advanced that Subaru's system, but it should provide some security on those long late night drives.
How the f do I get it out of eco mode? Pretty sure I changed settings to that. Hate it! 🤬
💩 I wish there was a way to turn the driving lights off on the lower part of the bumper when you’re parked with your engine running they are always on. I wish there was a way to turn them off. I’m thinking about disconnecting those lights removing the plug. Don’t see a switch on my truck to be able to turn them completely off. 💩
Lock for the headlight relay, buy I electric switch in Nissan Dealer (around $ 20.00), install the switch in the free spot on the left side, run two cable to the switch and jump the power to the switch. Around the 3 hrs job, if you want to like professional
Cruise control is the worst I have experienced. Otherwise I love the truck.
The cruise is awful for hills, way too crazy at downshifting 5 gears to gain 1 MPH. I've found you an just apply light throttle pressure when climbing using cruise, it'll avoid all the transmission drops and revving and just slowly get back up to speed, add throttle before the cruise kickdowns happens then let off when up to set speed. That's how it should be tuned but no luck at an update yet
💩 I hate the ABS system when you’re backing up into your garage that part sucks. 💩
it's sucks that these are not standards
i would not want all that garbage on my truck
Many of these features are genuinely useful. Rear cross traffic alert, speed limit recognition, auto highbeam all great features
You don't want them because you don't have them 😂
@@tommycasidy3031😂😂😂😂😂😂😂
I have this vehicle. All these functions are junk. Very glitchy. Especially the locking mechanisms. Won't lock or unlock at times. Save your money buy an American car
If you are having locking issues make sure your door physical locking toggle rocker on the door card isn’t halfway between lock and unlock. If that is not all the way open or closed it causes problems with the electronic lock actuators. Once I figured that out my remote locking has been reliable. That rocker is totally redundant and I see no need for it.
@@netcruzer Electronics can fail. You need the manual switch in case that happens.
I have the same truck and had no issues and not heard any of the complaints you mentioned. The fact you say buy American worries me.
Frontiers are made in America
Made in Mississippi