WIDEBODY INSTALL ON THE MUSTANG! Can’t Turn Back Now!
HTML-код
- Опубликовано: 13 сен 2024
- We have started with the wide body kit on the mustang! We are cutting the fenders and test fitting everything to see how its going to work! Stay tuned for the finally look!
Clinched Flares ►www.clinchedfl...
Shirokai Widebody Kit ►shirokai.com
FOLLOW ME ON ↓
Instagram ► / johnathanwh
Twitter ► / johnathanharder
Snapchat ► johnathanharder
SUBSCRIBE! ► bit.ly/SUB2JOHN...
Hope you guys enjoyed the video! Stay tuned for more videos, car build, vlogs, and more!
Thanks so much for watching!
All these people saying "there goes another clean s197" dudes there are like thousands of stock s197s, this is something unique and I support it! Once its painted it's going to look amazing!
AllThingsBoost I’ll have to see it completed first not looking to good rn
John, be sure to paint over the areas that you cut on the fenders(rustoleum?) otherwise the exposed metal edges will rust.
I can’t wait to see it done!
Mustang Lifestyle
Fab up that gap that was left on the quater panel and inner quarter wheel well hook up your boyyyy with some welding and seam sealer
That’s a clean ass garage, cleanest I’ve seen on RUclips
thanks man hahaha
I like all the mods, keep going I look forward to the next installment on the wide body build.
Best of luck to you. I was against the wide body kit, but I will admit that this project is a lot different than the other car channels that I follow. You could have easily bought a 13-14 GT500 or a coyote, but you continued to keep making new content with the same car. Gotta respect that. Keep grindin’. Holla!
T-REX GT 💯
Best s197 channel out here no if four eyes pushed more content he would top u because he’s building a 4.6 but ur still the best s197 content pusher Nate rider sold out and you actually cares about your stang and you don’t break it every three months lol
The project is going to look great, just make sure that you don’t cut too much and everything will be fine bro! You guys got this!
It looks good so far. You got some big balls to cut your perfectly good car but I am sure it is going to look good after the paint. One question though, are the rivets going to show after you get done?
The rivet wont but the bolt and washer will
@@Johnathanharder Paint them black.
@@Johnathanharder what size of spacers did you use
I’m in love with your car😍😍
One thing about it John is if any time in the future you decide to go back to stock body you can, save the rear cuts and could replace the front finder's..
You dont gave to savez anything drill through the punch Welles and just replace quarterpanels fenders van be replaced as bell cars are a dime a dozen
Boost to match the body and size of wheels
your a crazy dude for doing this but keep going. These videos are fun to watch
Hey probably already plan to do it but will say you should really seal/paint the cuts and the drill holes so they do not start to rust down the road. But congrats on the car/build looks epic.
Don't listen to the comments bro. Do what makes you happy bro! This is coming from a Camaro guy
You need to get you some jack stands
"If he dies he dies"
Dude you are braver than me and I have done paint and body for 23 years...I could not do that to my 2019
Takes balls and commitment. Can’t wait to see this thing
You will do a great job my man!!!
Wow. Just put on the fender flares on my 2005 STI. I feel ya pain lol. Your car is going to look awesome. Nice install.
Can't wait to see the completed build!
GREAT VIDEO. IT REALLY TAKE’S A LOT OF NERVE TO CUT INTO A NICE MUSTANG BODY. BUT I HAVE FAITH IN YOU . GO FOR IT ,YOU’VE GOT THIS . CAN’T WAIT TO SEE MORE. GOOD LUCK. GOD BLESS!!😎🙏🇺🇸🏎
Been waiting for this vid too drop FOR THE LONGEST TIME😂❗️❗️💯💯 🔥
THAT STANCE GONNA GO CRAZY !
How r u going to cure the cuts. Keep the cuts from gathering water and dirt between the fender and kit.
Nice what size tires are in it. And rims. Saving for the kit
I can’t wait to see ya again man ps this was low key scary to watch but great job 💯💯
really liked the intro
Did you end up getting spacers for the tires? If so, what did you go With?
You guys got this. It'll be sick! Best wishes and Peace out brother!
Where did you find the wickerbill? I have the same spoiler and I've been looking for one that fits.
Whered you get the rivet gun. I'm installing a wide body kit on lucier 2014 mustang gt
Maybe a stupid question… why cut the old fenders, can’t the extensions just go on top?
Get'r'done 👀
The moment you see that cut is the moment you go... It's screwed up now... Might as well go HAM! I could never do that. Well... never say never... But it's highly unlikely.
And 2" spacer? Damn, not something I would personally be comfortable with. I don't like spacers at all, too many horror stories out there. Some people run them for years with zero issues and others have catastrophic failures.
Before you paint could you feather in a thin layer of bond to cover the hardware and washers? Just a question.
What size width do the the tires need to be for a wide body kit on a mustang ?
Great job , question , doing my kit now but trying to find rims and tires so what size rims and tires are you running and where did you get them?
Rim and tire spec for front and back ?
I wouldn't have done it to the front...😮
I see people do this and I can’t help thinking there goes another ruined car think about it when you’re widebodied you’re not gonna be able to race or pulls I feel like you have to you do this you’re going to put airbags on it and then it will really be useless why
If he can get in it and drive it, it won't be useless.
Nigel B. I guess
Bro everyone can do what they want to their cars...I see it's only your point if view but still let's the see how it turns our before hating
Mr_4point6 I’m not hating on him at all I just know what type of content he creates and you don’t see too many widebody cars holding up after a lot of dragracing Street reason I think the car looks meant to begin with but like you said my opinion his car he can do whatever you want
@@russell11fitzgerald you are right man..lot of valid points on your side cant argue with that..
what was the previous front tire size ? any rubbing issues on (i guess eibach sportline ) ?
What kinda bumper you got on it?
I hope you put some primer on your cuts to protect the bare metal! 😉
I hate when my rear ear hurts..
Yessss!!!!!!!
Looks really good. you might need bigger brakes😂
M2300t will do it justice.
What year is that mustang
Come on I want to see it done lol
When they cut the finders I was like 😷👻💀
MY REAR EAR!! Lmfao
its your car do what makes you happy bro
is it 2014?
Your money, your car.
Gotta have balls to cut up your stang like that 😅 hope it turns out good man!
💪🏼💪🏼💪🏼💪🏼💪🏼
Bro you so happy because your Honda body kits
Modified wide body razor NFS mousewanted brow its viral
No turning back but who cares. This thing will be one of a kind and look sick when it's done.
Drilling holes... hmm.. can't even imagine your pain)
PUT THIS TIRE Mickey Thompson Sportsman S/R Radial 33X22R20LT REAR
Mickey Thompson Sportsman S/R Radial 31X18R20LT FRONT
FORM CUSTOM BOTTOM AND TOP
Lmao! Looks like good friends having a good time! I’ll trade a nice car for a good time every time! But lmao on the Impact driver for a drill! That’s either a good idea or really bad! Too funny, but if the young man wanted this than more power to him! Do what u want and Foook the haters!
😎🚗💨
I need your old front rims if you wanna get rid of them. Mine have dent in the lip
I'm number 5
😈😈😈😈😈😈😈😈😈😈
Kids this is why you don’t do meth..... lmao
He'll know the car ugly the body kit
Looks bad.
Badass that is
Fenders are cheap anyways
Im glad you completely ruined the car