How to Buff Polyurethane to a High Gloss
HTML-код
- Опубликовано: 5 фев 2025
- I need to polish to top of this oak slab coffee table. I have already applied about 15 coats of polyurethane to the top, and let it cure until I cannot smell it. Next I'm going to wet sand the top with 2000 grit wet/dry sandpaper, then buff it using a Surbuf microfiber buffing pad on my Random Orbit Sander. If you have any other questions, please leave a comment on the video and I'll answer them.
Here's the video where I built the table - • How to build an Oak Sl...
-- Afilliate Links to Products Used --
Meguires Ultimate Polish - amzn.to/2YhEaKz
Sur Buf Buffing Pads - amzn.to/2ybqYfz
Dewalt Random Orbit Sander - amzn.to/2SKtG5m
-- Visit My Website--
www.homebuiltw...
-- Ways To Support HBW --
www.homebuiltw...
-- My TeeSpring Store --
teespring.com/...
-- My Amazon Affiliate Store for recommended products--
www.amazon.com...
-- Join the HBW Built not Bought Facebook Group --
/ 623919504748705
-----Connect on Social Media-----
/ homebuiltshop
/ homebuiltshop
/ homebuiltshop
/ homebuiltshop
-- Join the Community on my Website --
www.homebuiltw...
-- Check Out My Handmade Guitars --
www.hayleyguit...
----- My Mailing Address -----
Home Built Workshop LLC
P.O. Box 84
Peyton, CO 80831
Join in on My Weekly Live Stream (events calendar) -
www.homebuiltw...
Please remember when using tools of any type, there is the potential for injury. You are responsible for your own safety. Make sure you know how to use your tools properly, work at your own risk, be safe, wear your safety gear, and most of all, have fun!
#woodfinishing #howtobuffpolyurethane #woodworking
Thanks so much! Don't pay attention to the stupid trolls. I never understand why people can get nasty. Especially with an informative video, that you were kind enough to put out. Kudos to you!
This is a killer video!
Sharing a couple more things I learned in the process. When selecting an automotive polishing compound make sure to get one that is a POLISH, NOT A RUBBING compound. The bottles and jars can be deceptively similar. Rubbing compound is too abrasive to leave a mirror shine on polyurethane.
Wet sanding by hand works fine if you can’t find 1500 grit with a Velcro backing for the orbital sander.
Picked up 4 inch round microfiber pads and they stick on great to the orbital sander. $2.50 for a pack of 5 at Autozone. No need for buffing pads with Velcro backing if you can’t find those either.
The polishing process takes longer than you think even with the orbital sander. I can’t even imagine doing a large surface by hand.
The joy of accomplishing a smooth mirror shine is worth it!
Okay - so I followed this process exactly - and the issue I have is that I "don't" have a mirror finish! I applied this process following a multi-multi-multi day application process of General Finishes gloss finish, but wanted a finishing process that took away all the nibs. I wiped every coat strategically using microfiber cloths, but even here there occasionally can be an errant poly fiber that gets free. In using the 2000 grit process, I took away the nibs, but it clearly took away the original high-gloss of my final poly coat. The polish did not bring that back. My question - would using a polishing compound smooth back the finish to a high enough grit that it would turn mirror? This isn't for everyone, but I use this table as a production flow table for slides and negative digitizing.
There are pluses and negatives of using Minwax/Varathane versus General Finishes, but the biggest benefit to General is that it takes a little longer to dry and levels out better.
You can go over your finish by hand with the 320, Didn't wipe it down by hand to get the dust off, You want at least three coats. And then apply your wax should be fine.
@@bfremming Hi. Did you solve this issue? I'ver got the same dilemma: my final poly coat is glossy and level, but to the touch I can feel some minor bumps here and there. I mean you might not even see them when you look at the table, but you definitely can feel them if you know what you are looking for. Since I applyed over ten coats of poly with sanding, wiping off with mineral spirit and then again getting rid of miniscule particles with tack cloth in between coats, and overall have spent on this table over a month, I kind of don't want to compromise, though I'm sure most of the guys would just leave it as it is and enjoy. )) Still, I'm a bit worried what if I start this buffuing/polishing routine, I might, just might get rid of those microbumps but may lose my nice gloss. So I still can't make up my mind over it. What are your ideas or findings?
Jeff, you have outstanding speaking and teaching skills. Thanks for one of the best fine woodworking videos on RUclips. 10/10
+David Urquhart thank you!
Jeff Baker
The comment was nothing really...NP Jeff. I'm from an industrial engineering background, but specializing 18 years in the natural stone industry. Basically had to teach existing hand fabricators, glass machine manufacturers, etc how to convert most if not all of their existing products, processes, and methodologies from manual to automated.
Needless to say, essentially I became a technical writer by night, and a teambuilder and trainer during rhe days.
YES....I MADE OVER 235 Training videos for everything from shop helper, to your typical owner/ CEO's.
So I'll drop you another comment(s) as soon as I get a chancr tonse you in action again!
Thanks again Jeff.
Paul M
drinking game.... everytime he says random orbit sander.
I came to say the same thing. This was a very well organized and presented instructional video. I'm rarely motivated to hit the Like button but I did for this one.
Used this technique and my project turned out fantastic. It gave it such a “glassy” look, thanks.
Awesome! Thats great to hear. I'm glad it was helpful.
Very informative and really useful video. I like how you touch upon topics around the core subject. Not just "here's a sander, run it across the table with 2000 then a buffer, thanks for watching". You go into potential problems, and tips on a deeper level. Definitely worth it, thanks!
I like how you gave a detailed remedy in case of accidentally sanding through the finish. Your finish looks awesome. Great video.
Thank you very much!
The last 2 minutes of this video were most helpful, not applying a finish to a too highly sanded finish and the smell test for the final drying... Great vid, thanks.
+Steven Vacher thanks. The smell test works well for me. It's important that the finish is cured.
Thank you so much for this video. I bought a butcher's block to put my turntable on. (For stabilization) I wanted it to match the plinth of my turntable. High-gloss cherry red. I sanded it down, applied the Cherry stain, and put multiple coats of polyurethane on it. Your video helped me so much in obtaining the perfect high-gloss shine of my turntable. 👍 THANK YOU
Car detailing nut here chiming in. The meguires ultimate compound you're using is more of a cutting compound and would be good to use like you did right after wetsanding. But, it will leave a slight haze on softer finishes. I would go one step further and go at it with a finer abrasive like meguires 205 (probably have to get that online) after the compound to make it really pop. If you want to be really hardcore you can get a black foam buffing pad for that step instead of the more aggressive microfiber pad you're using. Believe it or not the pad makes a huge difference. Keep up the good work.
Thanks. There's some 3M stuff I really like but didn't have time to track it down for this project. I think it's called FinessIt.
Im glad to see people learning this method ive buffed millions of sq foot of floors that have poly in the floor finish. It just like car buffing or floor buffing pads and polish compound
I love how you go through every step and the excitement that comes through when you're talking as well!
The piece came out so beautifully 😎. You just earned another subscriber!
+Donna Cracchiolo thank you so much.
Make that 2 new subscribers. The piece looks fantastic.
This was borderline amazing! Very clear and well-spoken. Much appreciated!
Thanks. I'm glad it was helpful.
Watched this video last year and used this technique on a couple of toychests I made for my niece and nephew for Christmas. They came out beautiful. Thanks so much for the video, I will be using this technique for all of my finishings going forward!😁
That is awesome! I'm happy it helped you out.
I just redid my hardwood floors, 3 coats of oil based poly after staining, I sanded in between coats. Still little rough. So much work, now considering renting a push buffer to buff them because I know it will make them really look good. A lot of work re doing these 70 year old floors but they look amazing compared to the new flooring I had to install in kitchen. Way more character. Thanks for video
Jeff, you are a natural on the camera. Easy to listen to and a great teaching and conversational style. Well done! Also, super helpful.
+Chris Reed thank you very much. I'm glad you liked it.
I agree with Chris. Some youtuber videos are too long with too much worthless banter. You got to the point with good info.
Thanks!
Thanks so much! I appreciate the support.
Dude at first glance, I thought you were Woogie Woganowski from There's Something About Mary! Thanks for this technique. I'm gonna give it a try.
Holly shit I did too!!!😂😂😂
Hilarious 😂😂😂
Good to see I'm not the only one who was thinking of using McGuire's compound for automotive clear coat. Great video.
Watched this video a couple of years ago and came back for a refresher, really helpful, thanks!
Thank you. 👍
Thanks for this great video. Concise yet with all the basics and really helpful tips and caveats. Best single video I’ve come across on this topic. You’re a legend! 🇦🇺
Thanks for this excellent video. One suggestion... Once you are done with your 2,000 grit sanding, apply one coat of wipe-on poly with a lint-free rag. It will look like glass. If necessary, you can buff it with a polishing pad and polishing compound. You could even go over it with a lambswool pad for the final buffing.
Thanks, I'll have to try that.
I'm making a speed ball platform, going to use this technique to polish it, great video!
I am a couple years behind on this video but it is exactly what I was looking for. Thank you Jeff, great video.
Thanks!
Excellent speaking and lesson planning. Well laid out talking points and information sidebar moments. Good job, sir.
I mostly comment negative stuff and I am critic, constructively most of the time, but still. This video is perfect. You're appealing as a person, you say just enough no less no more and your techniques seems to be thorough and tested. Hats off sir
Thanks for that. I appreciate it.
I very much appreciate you mentioning what to look for, and what not to worry about.
good stuff jeff! ive learned the key to woodworking is PATIENCE. and thats a good tip about smelling it.ill remember that.thanks for sharing!🖒🖒
... Yes, bring the piece inside if you're able and wait for. It to gas out very good idea!👍
Just polished my table top with poly finish as you outlined. Worked good, thanks!
Glad it helped!
Made this easy and not over bombarded with information making it seem intimidating for a beginner.
I've wasted about two hours looking for answers but here in just 9 minutes, you answered all my questions! Thank you, pal! Good and clearly explained content!
Nice, I'm glad it was helpful.
Grasshopper,
Was it really a waste of time or part of the process??
Solid method. everyone will have different levels of experience, product preference & approach to finishing their specific project but this method will not let you down in the big scheme of things. Cheers!
My god what a fantastic user friendly video man lol this boosted my self esteem
Thanks man, I'm happy it was helpful.
15 coats of PU, thats crazy! The finish is amazing though.
Rightttt. Shit I wonder if 6 coats is enough lol.
Jeff, came across your vid when researching poly cure times, environment/ condition influences on cures, etc.
You make one hell-of-a-trainer my man! I don't watch many how-to vids mostly b'cuz of my professional background, but yours caught my interest enough to hit play. Wasn't disappointed one minute; actually watched it 2 times!.
But remarkable job on the video. The speed in which you advance through steps, introduction of tips/tricks to employ, caution areas to watch, etc. along with your voice, comes together beautifully and views like a professionally produced training video. KUDO's !!!
Ill try another one if I see in my travels! But thank you for the lesson I recieved that instilled a sense of experienced confidence in being able to carry out that job, instead of the normal "..I think I can do that' nervousness folks usually experience from taking in a how-to video before carrying out a task they arent familiar with.
If your not doing this kind of shit for a living, your definitely missing out on a calling !!
Thanks again Jeff!
Paul Michalec
stonesmart@live.com
+Paul Michalec thank you so much. I really appreciate your comments. There are many thing's that people can do if they just try it. Lots of times they don't because they just think they cant. (Myself included) I try my best to show in my videos, that it's not too scary and you can do it if you try. Sometimes it takes more than one try to get it, but eventually you get it.
Thanks again. 👍
Thanks for all the great info Jeff. Much appreciated! Keep up the great work, you are definitely an inspiration to keep at it!
+Jake Elliot thank you Jake!
no not cousins 😊
Update on Kramer Barrette Special maple fret board poly job I did . I applied the water based polyurethane in 4 coats then let sit for about 2 weeks light water sand an buffed it. Came out awesome thanks again for your awesome video
Nice video, great job on the audio. You should be able to find up to 3000 grit paper at any auto body paint supply place. Also, when you do your sanding & polishing (with DA or RO), don't polish in one direction all the time. On one pass you move front to back and on the next, side to side. This will give you the best finish.
Buffing and sanding after the finish is cured for two weeks... seems like a good idea. Thanks for this great video.
Never thought off buffing with a random orbit sander... good tip! Thanks for the informative video 🤓👍🏼
I didn't either until I saw these buffing pads. They work good.
I have the same sander, and always wondered if I could use it as a buffer. Just getting into this, so learning all I can. Thanks for the video
Hi Jeff liked your video of getting a polished finish on polyurethane wood.
I used this exact method to restore a clear lexan turntable lid. Worked like magic.
Excellent!
Maguiars Ultimate Compound is an excellant cutting/polish restorer. Great video.
I haven't had a bad result with it yet. 👍
I’m gonna subscribe to you. I built me a custom subwoofer box for my truck and now I know how to polish it. Imma watch more of your videos to learn about wood working.
Thanks for the great tutorial- I actually came here looking for some guitar buffing knowledge. To my joy and surprise, you mentioned buffing out a couple of guitars! Just wondering, what did you use for a top coat for your guitars, and how did you manage the contours of them? Thanks!
Same here. Second time I have heard the smell it test, I will hang my guitar in the house and try that. For a topcoat everything was purchased at an automotive paint store, I used a solids polyurethane with a hardener. It was a 2:1 ration but with my 100 degree heat did not probably need it but it does cut down the curing time. Wow, just realized this was from three years ago, lol. I hope you got your answer. Not sure what you meant by contours. Did you mean the shape of the guitar?
@@jimmymeetsworld464poly with a hardener? Do you recall the name of the product? I’m currently to working on a guitar
@@jesusgirarte-sandoval7535No, but any paint store will have it. Best used in cold weather where drying times take longer. After using immediately clean your spray gun.
This is the best video for High Gloss. Most will agree!
Thank you!
"When you can't smell it anymore, that's when you know I'm ready to go."
Yeah, I know what you mean
LOL.
LOL!
Oh, wow...lol
Oh boy. Lol.great video BTW
The bellybutton u-turn?
I just did my table today. It was a older table hadn’t seen polish in years. I used a car finishing polish and a 3” car polisher with Xtreme Solutions 367 Ice car polish and a wool pad at a lower speed. Got insane results .
Thats awesome, I'm glad it went well.
I finish wood for private jets for a living. If you have 15 coats on it like you claim use 1000 grit on a hard backed pad not a Velcro pad. Hard pad will sand out grain waves. Then switch to 2000 and buff. Done
Thanks, I'll have to try that.
bs you work on jets, you probably work in a scrap yard carting vinyl seats around
so true, Jebus is probably on the dole living off everyone elses tax they pay.
Funny how people try to be just trolls. Pretty ridiculous how people just cruise the internet trying to be rude. Sorry to crap on your day for having a job and a education. Any one wanting a nice finish try what i said and the truth will be evident.
An education, not a education. And I is always capitalized too.
I love the way you describe stuff and your genuine personality. I just hit the subscribe button!
Thanks and welcome to the channel!
Really enjoy your videos. Keep it up man!
+b strieg thank you. I will for sure.
Hey Jeff! What a smart looking table. That's worth the effort, and making a video about it. Very original. Thanks!
+David Clark thank you.
Jeff I have a question
Does this process also work with the resin epoxy? Great video, I enjoyed watching it
While I haven't tried it myself, I do believe it will work fine. 👍
charles henderson the process is exactly the same but it will take a few more passes with the polisher to get the scratches out. I have 3000 and 5000 grit sandpaper I use to cut down on polishing time on 2 part finishes, but these are quite expensive.
Yes it does work on epoxy.
My son's name is Peyton. We stopped by Peyton, CO on our way to Manitou Springs 2 yrs ago to take a picture of him by the sign. Neat little town.
That's cool. Probably a neat picture.
I never knew Chris Elliott was a woodworker.
Use the polish on his head...jking nice job.
Hahaha. I thought it was Jim Furyk the PGA golfer.
That's exactly what I thought so I scrolled to the comments to see if anyone else had beat me to it. XD
same here!
Thats Ed Kowalcyzk from the band Live
Phew save my life! My dads beautiful red cedar table with I think 25 coats of lacquer on has been in a storage pod and has had boxes on it for a year. All these weird high-shine shapes on the surface where the boxes were. Waxing didn’t help so it looks like this method may work! Great tutorial
i would like to see the finished table
+michael haiden there's a video on my channel of me building the table.
I think they meant the finished and shiny table. I was waiting for the finale too. Most people lift it up and wobble it to show off the shine.
Shruffle Love
I don't think he meant that, goober.
Worldraven .Nevar- yeah I think he actually did, geek.
I just went searching through all your videos and I can't find it. Link, please?
Thank you, Jeff, for this very clear and helpful video!
I don't have an orbital sander so I'm doing everything by hand. I have a pine tabletop on which I've applied 4 coats of semi-gloss oil-based poly. After each coat stopped being tacky, I put the tabletop went outside to dry. It's been low-humidity & downright hot here (northern CA), so I felt ok polishing it 2 days after applying the last coat. This coat had some brush stroke issues, so I wet sanded those spots very lightly with 600 grit paper (I now regret that) to smooth them down then I wet-sanded everything with 2000 grit. It now feels smooth as GLASS! BUT one issue: Those spots I lightly sanded with 600 grit are still slightly cloudier than the rest. This isn't visible when looking down on the surface, just from the side. What's the best way to even out the sheen? Hand rub the dull areas with a super-fine pad and polishing compound? Do that to the whole surface? Wet-sand the dull spots with 2000 grit? (Please tell me I don't need to apply another coat of poly or rough-up the whole surface again.) Thanks for your help!
Have you tried this technique on Epoxy? Having a tough time with epoxy. thanks,
+tchornomud I haven't tried it but it should work.
I used the “smell it” test a lot in my dating days…great advice.
Lol
How’s your brother Bobby Hill?
Are you mad they didn’t include you in the show?
You could have shown the final product a little bit more... Couple of shots with the light directly over it or even on the outside, so we could see it shine.
Yeah, we need more eye candy 😂
Maaann!, wood finishing has kicked me in the #@^s. So much patience, detail and care required.
Love that slab table top Jeff. What kind of wood is it ?
+Joe Dov thanks, it's white oak milled from my Grandpa's property in PA.
Great video, we finish guitars and this had several points that we needed.
Oh yeah, this process works great on guitars too.
Thanks for this, I'm going a kitchen counter.
Question, my coffee table has a varathane spar urethane finish. Is the process the same as this video? Also, I have another couple of pieces to finish, what's the best for tables/chairs as far as protection goes, and nice shine, water based or oil based?
Very well communicated and filmed! Thanks for taking the time to share your craft!!!
Thank you very much!
Used it for the first time last weekend definitely worth buying if you're a person who likes detailing your own car recommend first time to use on lowest setting 800 so you don't burn paint don't leave in one spot keep moving it over paint easy to use ruclips.net/user/postUgkxfzbDkCRyv3CFXnLZI4APZtRRuG2uRmP2 truck looks like new again used maguires black light battery life like all milwaukee products seem to hold up well 😀
Question: if you just burned through the finish after telling your wife it'll be ready today, how do you explain to her you'll need 2 more weeks to get it done right?
Oh no, just tell her its my fault. lol.
Over the phone, at a distance of course
Getting ready to do my speakers. Got 15 coats and ready to polish . Thanks man
Thanks! I am finishing layers on a table and needed to learn how to polish it up and I found you! Great video!
Awesome! Thank you!
thank man...i just did my gretch drumset!!!
+Ras Congo awesome! How did it turn out?
it turned out great!!! thanks!!!!
Great video, I was going to do this only after a week and with only 3 coats. I will add more and wait 2 weeks before buffing. Thank you
You can do it! The extra time will be a good thing. The finish will be cured more.
@@homebuiltshop thank you sir
I wish you were my next door neighbor!
Have you ever tried wood pore fillers? You'll be amazed how good the finish comes out using it.
have you ever polished your head with polyurethane
Tom Green He has polished his balls after srubbing them with an iron brush.
I notice we don't see a pic of you here. Is that because of the blinding light coming off your dome?
I polished my ex-wife’s right butt cheek with a stainless steel scraper like Venetian plaster
LMAO
Thank you so much for this video. Well explained. Loud and clear. Now I am ready to polish my nice varnished project. 👍
I've been wondering what Chris Elliott has been up to these days :P
lol. Now I have to watch Cabin Boy again!
You confirmed what i thought I could do, coming from the automotive background i read thinking poly is no different that auto clear coat. THANK YOU!
Yes. Different products but the same techniques apply.
Assuming you are used to using acrylic auto urethane, poly is much harder and will hold a polish better.
Acrylic is more soft and rubbery.
@@fieldworthyairsoft1436 its 100% poly clear full gloss. I didn't cut it with anything. I did a rifle shock a while back and smelled it and dude didn't joking it doesn't smell the clock I just made 5 days later still has a faint odor. So waiting for it to fully cure gonna do 2500 grit, cut and buff and call it s day.
Field Worthy Airsoft what sort of car has a soft rubbery finish?
Chris Elliott is hilarious
These pipes......are CLEAN!
Revel ride cu 7n
Hey Jeff...not sure if you’ll get to answer this question since the video is older but I’m gonna ask anyhow...fingers crossed. So, I have an old Red Mahogany bar in my restaurant that I’m refinishing during the Covid shut down. I’ve sanded it completely down and layered on 5 good coats of Spar Urethane. (Sanded with 320 grit between each coating). I’m very happy with the way it has progressed. I ended up with the same results as you in this video with having slight bumps and imperfections. I sanded the last coat with 3000 grit paper and it’s SUPER smooth. It just has that slightly dull finish that you described in your project. Here’s my issue, I’ve tried polish (Griot’s Garage Complete Polish from auto parts store), with a 6” Compact Palm Polisher and it shines, somewhat. But it’s not the super high gloss that I was seeing from the urethane before sanding with the 3000 grit paper. There are some low spots in the bar top that I couldn’t get to with the sanding job because I would’ve had to sand way too much to get to them. And I don’t really mind the imperfections as it’s an older bar. The low spots are still super glossy from the last coat of urethane and stick out because the polish isn’t gleaming like I thought it might. Any thoughts as to why I can’t get the high gloss look back from polishing? Is there a certain “grit” polishing pad I should be using? I’m at a loss. Sorry so wordy, just trying to get all the details in. Thanks for any help you can offer. Great video btw.
I find adding a couple drops of dish washing detergent helps lube the wet sand.
You feel it more around the edges because the wood is at a different angle..it's a different grain there...the toughest area to even out, and the toughest area to get an even stain on. You have a touch of Keith Carradine in your delivery. Thanks for this.
+sclogse1 thank you.
Awesome instructional, and great tips if you mess up. Lot of points also put me at ease while I was doing this myself.
Thanks, I'm glad it was helpful.
Great work Roland! Moira’s going to LOVE it!!! Hahaha jokes aside a very informative video.
I just did some kitchen countertops. With 7 coats of poly and then did the wet-sanding method you did. But by hand with 2500 grit sandpaper wrapped around a 2" x 4" rectangle pad. They have been sitting for 3-4 days now and they are pretty good. But I wouldn't mind getting them even smoother and with that extra bit of shine.
So at this point can I go in with the buff pads and polish?
I have the same Dewalt Orbital Sander as you. Can you reply with a link to the exact buff pads you use? And a link to the the exact polish?
If you add 2-3 drops of dish soap to the water it helps keep the sanding slurry from clogging the paper and prevents the sander from slowing down.
I usually have a little soap in there. Maybe I didn't add enough.
Excellent way of putting it across . I got s lot of ideas by listening and watching you.
+sal dsouza thank you.
Very informative. I've polished a few cars in my days, but vi wasn't sure how that would apply to polishing a wood finish. My current project is going to need a lot more coats before I even attempt this. Thanks for the great video.
Thank you. Its very similar to polishing a car.
Great job my man. Looks awesome. Now I gotta try to find one of them buffing pads.
Thanks, I've had mixed results finding them on Amazon. They seem to be hit or miss on availability.
Brilliant video. Extremely helpful to my home project. Thank You for posting
normally I'm not one for a high gloss finish, but this piece looks absolutely gorgeous.
+MetalChick27 thank you very much.
This is great - I'm planning to polish a polyurethane guitar, once it is cured and no longer giving off any smell.
It will work well on a guitar. Ive done several this way. Just be careful not to sand through, especially on the edges.
Thanks for questions that I was looking for on the poly drying. I’m doing my maple fret board on my Kramer barrette Special. This video was helpful.
Great video! Can I just ask, how did you make your table look like that, before you started sanding and buffing? When I use poly, it doesn’t maintain that “wet” look
15 coats.
More's Law.
Some is good, more is better and too much is just right. Sir...guess you were going for the deep looking finish. That's all good. But be advised. The thick finish will show dings and dents easier over time. The poly is not harder than the wood.
If someone burns through 15 coats with 2000 grit they might want to consider a different hobby. After years of aggravation I finally mastered the art of spraying poly. Seems to be a superior finish.
A well done video. Thanks.
I loved your character in cabin boy! Lol, good work
Good point that the clear finish does not stick to 1000 or 2000 grit sanded surfaces.
Thanks Jeff, you answered all my questions and more! I have to say very well demonstrated and you explaining all the details helps out a lot! The quality of the video is excellent also! A+
Thanks again!
+Cory Jones thank you.
If you add a little Dawn or Murphy's oil soap to your water you'll be able to see where you're going and what you missed. Also, if you decide to do a rubbed satin look the soap allows you to keep your strokes even. I have been a professional finisher since 1977 so if you have questions I'm glad to help. Johndlacy1@gmail.com or 850 619 3068.
Yeah I've been hitting a wall with trying to make a simple live edge table come out like that (it's pine, so it's not like it'll be "beautiful" the way that slab of yours looks - but my slab DOES have character). The biggest issue has been keeping dust off of it. Even using a home made rub on poly with a supposedly lint-free cloth didn't work out perfect. So I went the automotive fine sandpaper route. I can't find the products you used locally so I'll have to follow your links! Also, I've subbed.
Thank you for this tutorial! Clear and well explained. I have an oak buffet which is new, having a lacquer finish. It doesn't have bumps, very even and nice. But it's not smooth as a glass, and is a bit satin pulling on mat: I'd like it to be semi-gloss, or at least with a bit more sheen than satin. I thought about simply applying paste wax with a grade 0000 steel wool, then elbow grease to vigorously make it shine a bit more. But now, seeing your video, would the same process work on top of a lacquer finish (the problem is that I don't know how many coats of lacquer were applied)?