A lot of professionals builders of kits (not just Gundam kits but a vary of all kinds of kits) use brown on red, orange on yellow, black on blue, and grey on white. And some use matching colors, like darker red on red, navy blue on blue or blue on light blue. This method is supposed to create the shadow of the part, like if you angle a red part, the panel lines would appear darker red as its recessed in the panel lines, so one puts darker red in the panel line, which still keeps the actual color of the part which is red in my example. Its like shadows in animes, you don't see orange on yellow in their hair, you see a darker tone yellow on the yellow, like a darker yellow color. But its that type of method.
Lt. Furno Don't listen to that guy. he doesn't build shit and is a known troll in the Gunpla Community. Just look at how passive-aggresive he tries to make it look like his way is better than yours
Using your thumb is actually really good since the oil on your finger helps to remove the ink easily. Once you're done, just wash your hands and you're good! I do tend to use fine tip cotton buds to reach certain areas that my fingernails sucks at reaching though
wow still relevant even 4 years back...i just started build gundam recently since the pandemic, stuck in the house~ as a newbie even the simple gundam take an extra time to build it and the panel lining is the lazies thing i need to do if not the gundam will look meh....but i try ur tutor it work just fine for me....thx dude
WOW thank you so much for 3:50 OMFG of course! You just colour the ENTIRE white part and then use a cotton tip to erase it and it looks amazing - it looks so good and professional that whenever I see it I think the person has done some crazy weathering job but no, it's really just panel line smudging. What a game changer! (for me - I'm sure everyone except me knew about it lol).
I actually panel lined for the first time on a turn A recently and the results were incredible. I only used a marker and thumb to erase. The difference is night and day.
I just recently got into the hobby of buying these kits and assembling them as opposed to reading and video gaming and I wanted to take it to the next level after building five figures (Gundam RX-78, MS-06S Zaku II, Astaroth Origin, Red Astray and Exia Dark Matter). This served as a good introduction into the whole panel lining business for a newbie like me so I'm glad I found this channel. Subbed!
SHAME ON THEE!!!! Seriously, I highly recommend that you panel line your Gunpla. It did wonders for me. You can use a pencil if you don’t have money to buy a proper panel lining pen.
Holy Crap. Holy crap! I was not prepared for it to be that easy! I have twelve or so gunpla to panel line (I’ve never done it before), and I can do this! Thanks!
Honestly, the way he does it, I wouldn't recommend it, nor do you even need an eraser. trace the panels line with your pen. Let it dry for a minute, then either with a q tip or even your thumb or finger, just wipe away the excess amount you don't want even if you made a mistake. the natural oils from your fingers will act as a good eraser on its own.
@@mutuallysustainedhateboner1426 if you use a super magnifying glass you can actually see liquids coming out from the fingerprint seams when you squeeze your finger
I've never panel lined my gunplas before. I bought a bootleg HGUC Unicorn to practice. This is very helpful! Once I get the hang of it, I'm gonna panel line my RG Unicorn and RG Strike Freedom. 🥰
Thanks for the tip! Cleaning up panel lines has always been my Achilles heel, but this method works perfect. I'm super excited about panel lining now lol.
What I do, which is quite quickly to do while building is that I use the panel liner, wait from 10 to 20 seconds and then remove the excess with a tissue, you get a really good result.
Never thought about using an eraser! GENIUS!!! BAEL you shall now remain covered in blue paint!!! (I should explain that i used some citadel paint to paint in some areas on Bael along with the tips of its v-fin. The top tips of its front skirt look pretty good painted the same way.)
I was a bit worries about this process, did not even know how to call it, but now it seems actually way easier than I thought thanks so much for that ! Getting my first kit in the upcoming days and can't wait to start building !
I can't believe it's that easy. I've never actually built a gundam model kit but the hobby recently caught my attention. Usually I build and paint warhammer miniatures.
Thanks for this. I haven't actually panel lined any builds yet(2sd's, 1ng wing gundam that started it all, 1hg and one RG) as I don't have the markers but also was a bit intimidated by it. But with the RG Sazabi(yes a big part of it was from your video review for wanting, as the size of the crossbones RG really disappointed me) incoming and my first MG I feel like I should give it a go.
I just literally got my first gundam kit and I have to say this is a hobby with music. Thanks for the tips of coloring in . I can’t wait to do another kit
Nice tutorial! Im new to the hobby, but was wondering if you still use the same process today? Also Do you typically use a top coat first before you panel line? Which brand? So step one, cut, step 2 panel line or step one cut, step 2 top coat, step 3 panel line? Thanks!
Oh that is so cool! Really makes it pop! I’ve only ever built one gunpla before it was a buce. Great fun! Next one I build I’m gonna have to look into other waa ya to make it pop or add character. Maybe even weathering.
I've tried this method on both a Petitgguy and a Shining Break (although I used black instead of grey because I actually _like_ the large contrast, but that's just me). Easy? Yes. Perfect? No. The ink doesn't want to apply evenly, leading to some spots in the lining where the plastic's color shows through.
Dunno if ever mentioned something I do for detailed areas recessed into the plastic like around the hip skirts or chest areas, I fill it in, then with a tooth pick I'll gently press and rub the tip of the tooth pick into the area to erase the majority while keeping the outter edging untouched. This will provide a really nice sharp look for an area that would probably look blacked or grayed out if you just used your pen to color it in.
I saw him rub ugly marks with an ERASER. SUCH SIMPLE TASK!!!!!!!!!! (If i made a mistake i usually soak it in soap or alcohol until it all removes) Much thanks!!!!
You never know, I was looking at my RX-78 High Grade and it would look cool with a western style pose from the back. All the same this looks like a pretty solid method, and I do have these kinds of markers.
I actually do black parts as well with a bit of a light silver, makes them pop a bit. Also for the inner frame I do a bit of dry brushing silver, just a light touch so you don't see too much silver on it but enough to kind of give it that metallic sheen, plus it makes any recesses or popped our areas stand out
Just bought my first panel line marker and the gundam I bought with it is the unicorn HGCU and that's the thumbnail of this video. coincidence? and the Marker I bought Is GREY !!! DeIluminati
Thanks so much man!! I just started building gundams and I seen people paint them and stuff and I just hated the thought of doing that. This however is way better
I haven't tested this yet but one of the hobby stores I go to, has a modelers club every so often. The manager of the store was telling me that they sometimes use a simple pencil to panel line the Gundam models.
I didn't know that rubber erasers would remove the excess paint/ink from the Gunpla Fill Pins when I first started using them, so I would sand the excess off. I also didn't have a well ventilated area to work in, so paint thinner was out of the question.This results in a weathered look that isn't half bad, when you use a 300/400 grit sanding foam stick. It's nowhere close to looking as nice is some of the painted weathering I've seen, but it is a nice look. The real issue I have is that you need to take the time to sand most of the part, and that can be difficult if there are a lot of crevices; for those, I'll use sanding toothpicks. Another issue, is that you have to be careful not to over do it in areas with lots fine details; like a small raised area on top of another raised area. Panel lines that aren't properly molded (as in, not quite defective) are also easy to sand away if not careful.
i prefer using the lining marker instead of the detailing pen(since the ink can flow all the way through the panel linings), and it makes my job easier since the only cleanup i need to do is where i placed the marker. also, dunno if you've already fixed it, but your lupus' thigh armors are the other way round(the downward slant is parallel to the angle of the front skirt armor)
+Mecha Gaikotsu That's the point. Just press the panel-line on one point and let it cover with ink. Idk if the dot left can be erased with a, well, eraser tho, the ones sold here kinda suck
Good Day sir. I apologize beforehand for the noobness of my question. I'm new to Gunpla building and my girlfriend gave me two sets of Gunpla markers for Christmas. Before I use them I was wondering is there proper way to store them? Laying down, standing up, with the tip down? I'd be grateful for any advice.
That was pretty helpful! I'm a recent convert to the hobby, so I'm still learning, and stuff like this is really great. Are you based in Ireland? Guessing by the accent!
panel lining should be fun!! maybe u should just panel line it first with the accent panel line liquid...its quicker than using pen...then you can remove the parts from the plates
Glad I've seen this! I have a small collection up to now and am a real perfectionist when it comes to lining. I so often slip up and get frustrated at those little mistakes, going to buy an eraser tomorrow.
I build a epyon ew 1/100 mg what color should I panel line with gray or black also I have a lot of marks were the nippers cut what are ur ideas to make this cleaner thanks love your channel
Thanks for this video! Helped me decide gray or black to use on which colour piece. I do agree with your choices as gray is a bit too light on red and blue. Cheers!
I noticed you're using an Gundam style marker for the paneling. Will a regular fine tip marker work for the paneling? I have some Gundam models on the way and am new to putting the models together. I was just wondering if I needed to pick up the markers you used in this video or if the fine tips will be fine.
Can you tell mewhat kind of ERASER your using?. I kinda suck when it come's to knowing what tool's to use when it come's to PANAL LINING-paint's and tool's. THX in advance for a fast reply:)
I've always done it this way, but I just wipe away the excess with my finger. Skin oils are great for cutting through ink and can be wiped off later for a clean look.
Does this work over top coat just as well? Eraser and lIning pen is how I typically line out kits but I was curious if I need to switch to panel liner paints like tamiya offers
And then you apply too much, the panel accent seeps through the plastic and before you know it, that piece is broken in two. Don't forget to use a gloss coat, folks.
I live in Peru and we do not have gundam markers. Is there an alternative I can look for at art supply stores? Is this a type of pencil? A pen? I am nervous that using a normal fine point art pen won't errase like in your video. The video is great, but I could use the extra advice please.
I have 2 black panel line markers (One got used up). I'm currently building Master Grade Nu Gundam Ver. Ka and I panel line while I I'm also still in school and I dont have time to build Nu until Friday, Saturday, and Sunday but Sunday is Christmas. This Christmas I might get 2 or 3 more master grades (Depends if my uncle haves enough money). I might try the lazy why on my next Gunpla I get.
So I'm starting to get in to GUNDAM building, but I have one question to ask you. What type of markers do you recommend? Or can you tell me where you got that GUNDAM fine point marker
A lot of professionals builders of kits (not just Gundam kits but a vary of all kinds of kits) use brown on red, orange on yellow, black on blue, and grey on white. And some use matching colors, like darker red on red, navy blue on blue or blue on light blue. This method is supposed to create the shadow of the part, like if you angle a red part, the panel lines would appear darker red as its recessed in the panel lines, so one puts darker red in the panel line, which still keeps the actual color of the part which is red in my example. Its like shadows in animes, you don't see orange on yellow in their hair, you see a darker tone yellow on the yellow, like a darker yellow color. But its that type of method.
sonicrockmanx Hey, can you reply? I need some help; you seem to be an expert.
In 4:00 He erased/faded the gundam marker very easily with a cotton bud,
but for me it didn't work, I used alcohol aswell.
Nick Fanchette I tried shaking it. Still didn't work
Edit: I accidentally put water on a marker, will it get damaged?
+sonicrockmanx What would you consider is better; darker shades of the same colors, or brown on red, orange on yellow, etc?
If the it's a gray piece would you just use black?
For the eraser, it's best to use a rubber eraser.
Black = blue or dark gray pieces
Grey = white or lighter color pieces
Brown = red or yellow pieces
xxnike629xx i use brown for blue
Lt. Furno Interesting. But try it the way I suggested and use the rubber eraser to clean up parts. It'll look nice. ^_^
Lt. Furno Don't listen to that guy. he doesn't build shit and is a known troll in the Gunpla Community. Just look at how passive-aggresive he tries to make it look like his way is better than yours
How bout a pencil eraser
xxnike629xx is this actually ok?
I'm even lazier than that. I simply use my thumb in place of an eraser.
Ray_Manta I use a micron pen and and don't erase at all😁
Ray_Manta same
Ray_Manta i would use my mouth.
I use panel line accent. Only problem is if you don't dry the excess liquid, it sticks to the plastic, eroding it and eventually breaking it.
Using your thumb is actually really good since the oil on your finger helps to remove the ink easily. Once you're done, just wash your hands and you're good! I do tend to use fine tip cotton buds to reach certain areas that my fingernails sucks at reaching though
wow still relevant even 4 years back...i just started build gundam recently since the pandemic, stuck in the house~ as a newbie even the simple gundam take an extra time to build it and the panel lining is the lazies thing i need to do if not the gundam will look meh....but i try ur tutor it work just fine for me....thx dude
WOW thank you so much for 3:50 OMFG of course! You just colour the ENTIRE white part and then use a cotton tip to erase it and it looks amazing - it looks so good and professional that whenever I see it I think the person has done some crazy weathering job but no, it's really just panel line smudging. What a game changer! (for me - I'm sure everyone except me knew about it lol).
I actually panel lined for the first time on a turn A recently and the results were incredible. I only used a marker and thumb to erase. The difference is night and day.
I just recently got into the hobby of buying these kits and assembling them as opposed to reading and video gaming and I wanted to take it to the next level after building five figures (Gundam RX-78, MS-06S Zaku II, Astaroth Origin, Red Astray and Exia Dark Matter).
This served as a good introduction into the whole panel lining business for a newbie like me so I'm glad I found this channel. Subbed!
I'm even lazier than that,I don't panel line!
SHAME ON THEE!!!!
Seriously, I highly recommend that you panel line your Gunpla. It did wonders for me. You can use a pencil if you don’t have money to buy a proper panel lining pen.
I'm looking to see if it's worth my time. I like the models with the exception of the stickers. I'd rather paint all the things that need stickers.
@@KiomonDuck thats what im doing just got started
@@Titaniumjake1472 nice. It's to moist here to spray paint anything.
i am lazier than you..i bought the gundam..but never assemble it
Holy Crap. Holy crap! I was not prepared for it to be that easy! I have twelve or so gunpla to panel line (I’ve never done it before), and I can do this! Thanks!
"Never going to display it backwards are you?" next shot is the back of the gundam haha
#BackLivesMatter
GiantBatGaming Ah, I see you’re a man of culture as well.
So you're saying I basically panel line the whole part then erase it?
Honestly, the way he does it, I wouldn't recommend it, nor do you even need an eraser. trace the panels line with your pen. Let it dry for a minute, then either with a q tip or even your thumb or finger, just wipe away the excess amount you don't want even if you made a mistake. the natural oils from your fingers will act as a good eraser on its own.
Hikuro2pnt0 do you need to clear coat over just panel lines? I’ve never gotten a straight answer
Hikuro2pnt0 does this work with HG gunpla?
@@mckmitte no need
@@mutuallysustainedhateboner1426 if you use a super magnifying glass you can actually see liquids coming out from the fingerprint seams when you squeeze your finger
I've never panel lined my gunplas before. I bought a bootleg HGUC Unicorn to practice. This is very helpful! Once I get the hang of it, I'm gonna panel line my RG Unicorn and RG Strike Freedom. 🥰
Thanks for the tip! Cleaning up panel lines has always been my Achilles heel, but this method works perfect. I'm super excited about panel lining now lol.
What I do, which is quite quickly to do while building is that I use the panel liner, wait from 10 to 20 seconds and then remove the excess with a tissue, you get a really good result.
2-3 a week?
*LAUGHS IN WARHAMMER*
A model a day keeps boredon away. That's my painting schedule.
Ah shit, time to go buy some more.
2-3 weeks
LAUGHS IN AIRCRAFT KITS
*cries surrounded by a hoard of tyrannids and imperial guard*
Never thought about using an eraser! GENIUS!!! BAEL you shall now remain covered in blue paint!!! (I should explain that i used some citadel paint to paint in some areas on Bael along with the tips of its v-fin. The top tips of its front skirt look pretty good painted the same way.)
I'd love to see more 'How to...' videos. I really want to get into Gunpla but I'm fairly clueless about some of the specifics, such as Panel lining.
This was Perfect. Thankyou, I'm just getting into Gunpla & finished my 1st one. I wanted to put more details in, this was great. Thanks again 👌🏾
holy shit this is what I've been doing ever since I started panel lining
I was bored and started doing this to a GM cold district last night. Guess I was doing it right lol
Great tutorial. Made me far more at ease with the idea of trying to get into panel-lining!
Erase!?.. I've been using my shirt.... If only I had known.
Black Fang lol same here 😆👏🏼
That works?
Erase!? Iv'e been licking my parts clean... if I had known.
@@fujifilm5127 Is that why your gundams always seem to be smiling?? LOL
@@fujifilm5127 imagine the smell of your gundams..
About to buy my first Gundam, and thank you. Cause I have extremely shaky hands when doing anything xD
Be even lazier like shop owners where you put a lot of detail into the front but zero effort into the back
I was a bit worries about this process, did not even know how to call it, but now it seems actually way easier than I thought thanks so much for that ! Getting my first kit in the upcoming days and can't wait to start building !
I can't believe it's that easy. I've never actually built a gundam model kit but the hobby recently caught my attention. Usually I build and paint warhammer miniatures.
The quality of your videos has so drastically improved. I’m proud of you!
Gosh i thought panel lining is hard af. Thanks for making it easy 😂😂
Thanks for this! Way less stressed about panel lining my first model now
Thanks for this. I haven't actually panel lined any builds yet(2sd's, 1ng wing gundam that started it all, 1hg and one RG) as I don't have the markers but also was a bit intimidated by it.
But with the RG Sazabi(yes a big part of it was from your video review for wanting, as the size of the crossbones RG really disappointed me) incoming and my first MG I feel like I should give it a go.
I just literally got my first gundam kit and I have to say this is a hobby with music. Thanks for the tips of coloring in . I can’t wait to do another kit
That eraser tip really saved my MG Strike Freedom. Thank you sir
#1 gunpla channel hands down. I can’t even watch zaku anymore.
This is a total life saver for someone who fails at details.
Pencil also works
wut
Yes it does. Just sharpen your pencil and you can use that as an alternative.
Router25
....why did I never think of that?
I use 0.3mm mechanical pencil. it real works. :D
this is my recent build. i used pencil at-least 90% of the build www.flickr.com/photos/cervantescalibur/32187712764/in/album-72157678994172370/
Looks awesome! Going to be trying this out on my next build. I have not done panel lining yet but looking forward to it now
Glad to see im not the only one here from the future but ya try it with gundam markers its so cool
@@epicskeptic3476 I did try it and now obsessed with how much better even a basic kit looks with the process done
Nice tutorial! Im new to the hobby, but was wondering if you still use the same process today? Also Do you typically use a top coat first before you panel line? Which brand? So step one, cut, step 2 panel line or step one cut, step 2 top coat, step 3 panel line? Thanks!
The eraser trick is really handy!! I used Q-tips and rubbing alcohol before hand, this looks a lot easier!!
Oh that is so cool! Really makes it pop! I’ve only ever built one gunpla before it was a buce. Great fun! Next one I build I’m gonna have to look into other waa ya to make it pop or add character. Maybe even weathering.
Thank you so much Ill have my first gunpla this week and I have no idea what to do this helped me a lot
Thanks Mecha..I am a straight builder..and never panel lined before..This video helped me a lot..
+Kakashi Hatake you're welcome!
i already done it but not intentionally. now you show it its such nicely done the lazy way. thanks.
New to gunpla. Would love to see some completed before/after comparisons to see if its worth it.
I've tried this method on both a Petitgguy and a Shining Break (although I used black instead of grey because I actually _like_ the large contrast, but that's just me).
Easy? Yes. Perfect? No. The ink doesn't want to apply evenly, leading to some spots in the lining where the plastic's color shows through.
Great video ! Helped me get rid of my hesitation on panel lining and just go for it !!
Dude I love your vids! You are acctually the one who inspired me to build gunpla!
So refreshing to see someone spell arse correctly
Brilliant!! Thanks very much for doing this and perfect timing, just got my first set of markers and kit!! You had me at Lazy Arse!! 😆👍🏼
Dunno if ever mentioned something I do for detailed areas recessed into the plastic like around the hip skirts or chest areas, I fill it in, then with a tooth pick I'll gently press and rub the tip of the tooth pick into the area to erase the majority while keeping the outter edging untouched. This will provide a really nice sharp look for an area that would probably look blacked or grayed out if you just used your pen to color it in.
Oh hey... I'm lazy too...I just started gunpla so I feel this video is all about me!! ^^
Great video man! Although I already use this method, this video taught me a few things I've been doing wrong.
I saw him rub ugly marks with an ERASER.
SUCH SIMPLE TASK!!!!!!!!!!
(If i made a mistake i usually soak it in soap or alcohol until it all removes)
Much thanks!!!!
You never know, I was looking at my RX-78 High Grade and it would look cool with a western style pose from the back.
All the same this looks like a pretty solid method, and I do have these kinds of markers.
I actually do black parts as well with a bit of a light silver, makes them pop a bit. Also for the inner frame I do a bit of dry brushing silver, just a light touch so you don't see too much silver on it but enough to kind of give it that metallic sheen, plus it makes any recesses or popped our areas stand out
Just bought my first panel line marker and the gundam I bought with it is the unicorn HGCU and that's the thumbnail of this video. coincidence? and the Marker I bought Is GREY !!! DeIluminati
Brother u are a hero to Gunpla society and Mech pilots everywhere ⭐️💫😂
I mainly apply black panel line marker onto white parts of SDs to bring out the cartoony aesthetic.
Thanks so much man!! I just started building gundams and I seen people paint them and stuff and I just hated the thought of doing that. This however is way better
I use HB pencil to show silver effect on white surface :)
I haven't tested this yet but one of the hobby stores I go to, has a modelers club every so often. The manager of the store was telling me that they sometimes use a simple pencil to panel line the Gundam models.
I didn't know that rubber erasers would remove the excess paint/ink from the Gunpla Fill Pins when I first started using them, so I would sand the excess off. I also didn't have a well ventilated area to work in, so paint thinner was out of the question.This results in a weathered look that isn't half bad, when you use a 300/400 grit sanding foam stick. It's nowhere close to looking as nice is some of the painted weathering I've seen, but it is a nice look. The real issue I have is that you need to take the time to sand most of the part, and that can be difficult if there are a lot of crevices; for those, I'll use sanding toothpicks. Another issue, is that you have to be careful not to over do it in areas with lots fine details; like a small raised area on top of another raised area. Panel lines that aren't properly molded (as in, not quite defective) are also easy to sand away if not careful.
Thanks this helped me understanding what parts too panel line and how to panel line
this is the best channel for me.
hey when will you do the vidar review you know the gundam that hates the stair case
Barbatos Unicorn i dont get the joke D:
Is it because Bauduin can't walk in the end of the show?
i prefer using the lining marker instead of the detailing pen(since the ink can flow all the way through the panel linings), and it makes my job easier since the only cleanup i need to do is where i placed the marker.
also, dunno if you've already fixed it, but your lupus' thigh armors are the other way round(the downward slant is parallel to the angle of the front skirt armor)
Thank you so much I actually bought the barbatos lupis before watching and this really helped
This is not the lazy one, that's why we have pour-type panel-line markers!
.... oh yea lol
+Hiruma Berserker I'm not sure what the ink is in that type, but I really don't like it. Feels too watery.
+Mecha Gaikotsu That's the point. Just press the panel-line on one point and let it cover with ink. Idk if the dot left can be erased with a, well, eraser tho, the ones sold here kinda suck
Mecha Gaikotsu You're supposed to let it dry for a few seconds while you continue panel line the other parts and clean it after.
Hiruma Berserker You can actually use water and cotton bud and it'll be erased instantly as it's oil based.
Awesome video! Definitely going to try this out for myself!
This is a great video for amateurs such as myself! :)
Good Day sir.
I apologize beforehand for the noobness of my question. I'm new to Gunpla building and my girlfriend gave me two sets of Gunpla markers for Christmas. Before I use them I was wondering is there proper way to store them? Laying down, standing up, with the tip down? I'd be grateful for any advice.
use the brown for warm colors like yellow and red, it accentuates the color and looks nicer than black or grey
+Astronopolis that's true!
That was pretty helpful! I'm a recent convert to the hobby, so I'm still learning, and stuff like this is really great. Are you based in Ireland? Guessing by the accent!
I don't build Gundam but these tips are kinda useful for other models
i havent gotten my gundam in the mail yet, but i used the markers on my figure rise trunk's jacket and boots and its a huge improvement so yea.
thanks for that info I'll be using your tips on my forst gunpla build
I like the way the brown looks on red and yellow parts
panel lining should be fun!! maybe u should just panel line it first with the accent panel line liquid...its quicker than using pen...then you can remove the parts from the plates
Thank you for the recommendations!
Glad I've seen this! I have a small collection up to now and am a real perfectionist when it comes to lining. I so often slip up and get frustrated at those little mistakes, going to buy an eraser tomorrow.
I build a epyon ew 1/100 mg what color should I panel line with gray or black also I have a lot of marks were the nippers cut what are ur ideas to make this cleaner thanks love your channel
Wow panel lining looks pretty easy.
Very helpfull.. this tutorial it's easy to be realized
I just started gunpla and yeah I like doing this lol
What eraser did you use? And do you top coat it first before panel lining?
Btw use brown color for red plastic hehe
Thanks for this video! Helped me decide gray or black to use on which colour piece. I do agree with your choices as gray is a bit too light on red and blue. Cheers!
I did most of this b4 watching the video, i feel proud
I built mine already. Should I take it apart again to appply panel lines? Or should I just do it while it’s built?
I use those fine tip staedtler pens. I have a gray one and a black one. Similar to the gundam markers from what I can see.
I noticed you're using an Gundam style marker for the paneling. Will a regular fine tip marker work for the paneling? I have some Gundam models on the way and am new to putting the models together. I was just wondering if I needed to pick up the markers you used in this video or if the fine tips will be fine.
Been doing it the same way you do ever since! HAHAHA
thanks for making this video, it was so good and solve alot of problem for me !!
Can you tell mewhat kind of ERASER your using?. I kinda suck when it come's to knowing what tool's to use when it come's to PANAL LINING-paint's and tool's. THX in advance for a fast reply:)
I've always done it this way, but I just wipe away the excess with my finger. Skin oils are great for cutting through ink and can be wiped off later for a clean look.
gunpla genius ur early genius in gunplay
You are the best tutorial
Does this work over top coat just as well? Eraser and lIning pen is how I typically line out kits but I was curious if I need to switch to panel liner paints like tamiya offers
Markers are still too much work, grab a tamiya panel line accent color, you touch the brush on a panel line and its done xD
gundam marker gm-301 is also a good alternative
And then you apply too much, the panel accent seeps through the plastic and before you know it, that piece is broken in two.
Don't forget to use a gloss coat, folks.
What ? never happen on me
GlaciusX2 but then we got to wait and I dont patience good
Don't do that with any gold kits though, the enamel will eat the plating... found out the hard way on my akatsuki :(
I live in Peru and we do not have gundam markers. Is there an alternative I can look for at art supply stores?
Is this a type of pencil? A pen? I am nervous that using a normal fine point art pen won't errase like in your video.
The video is great, but I could use the extra advice please.
You should really get a brown color,it looks awsome on yellows,orange,and reds
Very Helpful Vid! hahahahaha nice. earned a new subscriber!
I have 2 black panel line markers (One got used up). I'm currently building Master Grade Nu Gundam Ver. Ka and I panel line while I I'm also still in school and I dont have time to build Nu until Friday, Saturday, and Sunday but Sunday is Christmas. This Christmas I might get 2 or 3 more master grades (Depends if my uncle haves enough money). I might try the lazy why on my next Gunpla I get.
So I'm starting to get in to GUNDAM building, but I have one question to ask you. What type of markers do you recommend? Or can you tell me where you got that GUNDAM fine point marker