USB Charger on the 2018 Indian Scout Bobber

Поделиться
HTML-код
  • Опубликовано: 5 авг 2024
  • Purchased the aftermarket USB upgrade standard on the 2019 Scout lineup for my 2018 Scout Bobber. While its a spendy upgrade. Its a worthy one. Super quick install.
  • Авто/МотоАвто/Мото

Комментарии • 93

  • @chribing
    @chribing 4 года назад +4

    Jay, thanks for concise and clear demo on how to install this unit. I’m not very experienced but you gave me the confidence to do it myself. The only thing I had trouble with was removing the power clip to the speedometer. I ended up using a small pry bar to depress the gray tab. You rock and I enjoy your other vids too!

    • @jay_fast
      @jay_fast  4 года назад +1

      chribing that’s awesome! Glad it worked out! Thanks for the continued support.

  • @bluesandbikes9434
    @bluesandbikes9434 5 лет назад +2

    Just wanted to say thanks for making this video. I did a retrofit on my 2018 Scout, and this video answered a lot of questions and solved several problems for me.

    • @jay_fast
      @jay_fast  5 лет назад +1

      Colin Beatty that’s awesome. It’s a pretty straight forward install. A bit pricey. But I do use it all the time.

  • @okie__moto7474
    @okie__moto7474 5 лет назад

    Dude! I was looking at the battery tender gizmo just like yours! Great vid! You talked me into yet another buy! 👍

  • @jeffmoat6820
    @jeffmoat6820 5 лет назад +2

    Nice install.... made it look easy. Gotta get mine done. Thx for sharing Jay

    • @jay_fast
      @jay_fast  5 лет назад +1

      Ya man. Like I said. They are cheaper options. But this is just clean and simple.

  • @gbjr2751
    @gbjr2751 5 лет назад +3

    Installed mine over the winter, works great with my Indian branded Rokform mount above the speedometer housing

    • @jay_fast
      @jay_fast  5 лет назад +1

      Grier Boedker Jr nice. Been problem free?

  • @canadianrydz7057
    @canadianrydz7057 5 лет назад +1

    Awesome video! I don’t think ill be getting this but i have wondered about it - looks pretty simple.

    • @jay_fast
      @jay_fast  5 лет назад +1

      Super straight forward.

  • @PiHomeServer
    @PiHomeServer 5 лет назад

    Great post again ! I will never get balls to do that myself so that's why i bought the 19 model 😉

  • @indianoutlaw2419
    @indianoutlaw2419 5 лет назад +3

    Time to order mine!
    Good job bro!
    Ride on!

    • @jay_fast
      @jay_fast  5 лет назад +1

      Indian Outlaw it’s a pretty good upgrade. There are many cheaper options. But I like this one.

  • @BrandonBicasso
    @BrandonBicasso 5 лет назад +2

    Now.. We wait for them to add cruise control to the newer models and then the retrofit kit..

  • @fm24594
    @fm24594 5 лет назад +1

    Nice video jay. I did the pathfinder headlight upgrade as well as the charging outlet. The LED is a great light upgrade.

    • @jay_fast
      @jay_fast  5 лет назад +2

      Nice. Ya the USB was a quick install. Head light video coming out soon. Really happy with both.

  • @sonnymolina8748
    @sonnymolina8748 4 месяца назад +2

    Great job thank you so much for sharing this video is really going to help me 👍🏽

    • @jay_fast
      @jay_fast  4 месяца назад +2

      Awesome! Thanks for watching

  • @madcannon3162
    @madcannon3162 5 лет назад +2

    Nice Jay. My Sixty came with the USB cable preinstalled, thanks god, so I resorted to installing a cheap chinese X-Grip copycat with USB port and connect it at the headlight. Done, $15. I must agree is not as fancy and good looking as your install, but it does the job.

    • @jay_fast
      @jay_fast  5 лет назад +1

      I ran a ram mount previously. You can see it in my rokform install video. It worked well when I had my life proof case. But I truly do love this new rokform mount and case. Thanks for the comments!

  • @OutbackOutlaw
    @OutbackOutlaw 5 лет назад +2

    Ooooooo oright! I need one on me Chief.

  • @fredzuccarelli
    @fredzuccarelli 4 года назад +1

    Great Video....thanks for the post. This exactly what I want to do to my 2016 ABS Scout. Do you by chance know if the accessory wire you tapped into inside the headlight casing is also in the 2016??? That would help tremendously before I start to rip everything apart.
    Thanks in advance!
    F

  • @jasonheyninck353
    @jasonheyninck353 5 лет назад +1

    Thanks for another great post Jay. One thing, I think I would have preferred the usb port to be on the clutch side of the instrument cluster ? Keep the videos comin'

    • @jay_fast
      @jay_fast  5 лет назад +1

      Ya I don’t know. Stuck with what Indian gave me. But I’d agree.

  • @rodolfosabater7781
    @rodolfosabater7781 2 года назад

    Will it be possible to change the plug of the quadlock plug with a tip compatible to whats inside the cowl?

  • @mack22x
    @mack22x 5 лет назад

    Thanks for the video. I'm surprised you haven't got the brown and black mustang seat yet. Looks very similar to the stock one but worlds more comfortable. Wish I could pm you pics of mine.

  • @mississippimotoman2238
    @mississippimotoman2238 5 лет назад +1

    I also have an 18, but mine is the sixty . I like how all we have to do is wire in the light assembly, use the new mount , usb .. and plug and play.

    • @jay_fast
      @jay_fast  5 лет назад +2

      Mississippi Motoman they have all been pretty easy mods. Quite happy with it all.

    • @mississippimotoman2238
      @mississippimotoman2238 5 лет назад +2

      Jay Fast I am by no means a Motorcycle Mechanic, but if you have the right tools, follow the instructions, this stuff is easy like you say.

    • @jay_fast
      @jay_fast  5 лет назад +2

      Mississippi Motoman same here. I love watching tutorials on guys doing work. I am in no way saying my way is the right way. But if I can give back and help one guy out. Then it’s all worth it.

    • @mississippimotoman2238
      @mississippimotoman2238 5 лет назад +1

      Jay Fast same here . Yours IMO is great and would help anyone out .

    • @jay_fast
      @jay_fast  5 лет назад +1

      Mississippi Motoman appreciate the kind words!

  • @FNGMOTO
    @FNGMOTO 5 лет назад +3

    I’m glad you made this video I thought you had to pull the tank. The 19 scout and bobber come with the usb the 60 doesn’t. I was bummed out I thought it did.

    • @jay_fast
      @jay_fast  5 лет назад +1

      Ya weird how they change the most random things between models of the same bike.

    • @FNGMOTO
      @FNGMOTO 5 лет назад +1

      Jay Fast yup.

  • @georgevillareal2381
    @georgevillareal2381 4 года назад

    Is that wire connector have more than one wire? I saw one red was there another black also?

  • @drewdough6457
    @drewdough6457 4 года назад +1

    hey Jay. I bought a Bobber in May of 2018 and have watched so many of your videos. They have helped me so much. Thank you bro. I just recently bought a Garmin Zumo XT GPS, and I'm trying to figure out how to install this into my 2018 Bobber. It has a red/black 2 prong thin wire which I know I can run to the battery, but I'm wondering if there's a simple way of connecting it into the harness on the front end of the bike if I had some kind of adapter? Do you have any idea what I need here? Thank you again for all of your help!!!

    • @jay_fast
      @jay_fast  4 года назад +1

      Drew Dough hey. Thanks for the support. Really appreciate that. You have two points on your bike to easily wire in accessories. One under the seat. One at the headlight. Hit my on with a DM on Instagram and we can message easier.

  • @arshdeepkhaira939
    @arshdeepkhaira939 3 года назад +1

    Is it one port USB or two ? If one , can we put a one to two USB split ? Can we charge phone and power camera simultaneously if we put one to two USB split ?

    • @jay_fast
      @jay_fast  3 года назад +1

      It’s one. I don’t see why you would’ve be able to.

  • @arczi.p5217
    @arczi.p5217 4 года назад +1

    Nice job! I will order one ! Can you please give me link what torque wrench you are using? Thanks

    • @jay_fast
      @jay_fast  4 года назад +1

      ARCZI .P I just bought them from my local auto parts store. But the brand is JET

  • @joedavis6377
    @joedavis6377 5 лет назад +1

    Hey Hey Mr. Fast. Just ordered mine. Thanks for the tutorial. Noticed your rear fender rack. Functional? Opinion? Obviously on your bike, so must be worth it. I haven't gotten the bag...yet.....still debating. Besides credentials, I don't really need the storage. Maybe a water. Let me know. stay safe my favourite Canuck.

    • @jay_fast
      @jay_fast  5 лет назад +1

      Joe Davis it’s a very nice piece. I bought it when I bought my side saddle last year around this time. I just put it on to try it out for my trip to California. Fits great. Looks good. It’s not cheap though. I just bought a Corbin brave saddle. So I’m going to have to rejig the rack somehow.

  • @bradsonnicksen6907
    @bradsonnicksen6907 4 года назад +1

    I just replaced my speedo (warranty) because it was full of moisture. The new replacement now reads zero miles. Do you know how I could get it back to reading the 11,500 like it was? I emailed Indian, still waiting for a response...

    • @jay_fast
      @jay_fast  4 года назад +1

      Brad Sonnicksen no. Unfortunately I don’t? I haven’t experienced this. I would assume the mileage is recorded within Speedo. There may be nothing they can do?

  • @joselongoria392
    @joselongoria392 5 лет назад +1

    What brand of phone case holder is that?

    • @jay_fast
      @jay_fast  5 лет назад +1

      Is the billet aluminum mount from rokform. Same with the case.
      ruclips.net/video/aw6-_86srSA/видео.html

  • @bradsonnicksen6907
    @bradsonnicksen6907 4 года назад +1

    Did you just order the parts off Indian's website as if you were getting them for a 2019? I want to do the same thing...

    • @bradsonnicksen6907
      @bradsonnicksen6907 4 года назад +1

      Nevermind - I think I found it: Housing PN:5633908-658 ($87.99) and USB Module PN: 2414051 ($71.99) Sound correct?

    • @jay_fast
      @jay_fast  4 года назад

      Brad Sonnicksen ya. Just off the indian website. All the part numbers are in the video. It’s a good mod. I like it.

  • @71spazz
    @71spazz 4 года назад +1

    Do you have a link to where you got it so I don't have to ask my dealer and they mark up

    • @jay_fast
      @jay_fast  4 года назад +1

      dennis Spazz lane I purchased it directly from the Indian website.

  • @donbuck9730
    @donbuck9730 3 года назад

    Hey, could you please source the stand (yellow) for me? It's exactly what I'm looking for, but can't seem to find. thanks in advance.

    • @jay_fast
      @jay_fast  3 года назад

      It’s made by Baxley companies. It’s called their sport chock. I think I paid like $80 for it. Bought it used.
      I highly recommend. Great use for in the garage or any maintenance

  • @RebelRides
    @RebelRides 5 лет назад +1

    Wow. I thought there would be a bit more of a faff to fit that!

    • @jay_fast
      @jay_fast  5 лет назад +1

      Dazzle Яebel Rides easy peasy as they say 😎

  • @trevorwelsh9664
    @trevorwelsh9664 5 лет назад +3

    I was wondering where you were

    • @jay_fast
      @jay_fast  5 лет назад +1

      I’ve been riding and modding. As we speak I’m editing another vid

  • @CDLNEPA
    @CDLNEPA 5 лет назад +2

    Looks clean.
    Not sure if it is worth the money, for me. I have the USB like you were using before.

    • @jay_fast
      @jay_fast  5 лет назад +2

      Ya. It’s a spendy unit. Many many other cheaper options.

    • @Boobtube.
      @Boobtube. 5 лет назад +2

      give it a year, it will come down.

    • @jay_fast
      @jay_fast  5 лет назад +2

      XboobtubeX now they just need to come out with a cruise control. Make Brandon bicasso excited.

  • @fabric8er
    @fabric8er 5 лет назад +2

    Your phone says March....... you holding out on us bro-chacho ? #teamfasty #jaywithdrawls #missing #idontevenhaveanIndian haha 👍

    • @jay_fast
      @jay_fast  5 лет назад +1

      fabric8er you don’t even want to know have far back i have footage from.

  • @bjdouma
    @bjdouma 3 года назад

    I don't see the promised link.

  • @4greenb
    @4greenb 5 лет назад +2

    only 160$ US not bad since my the non abs model is 1,000 more for 2019 and the usb port is only differnece

    • @jay_fast
      @jay_fast  5 лет назад +1

      Ya. Good way to look at it. The 2019 are more money than I paid for my 18

    • @tunefully1792
      @tunefully1792 4 года назад

      good info. I was wondering why the kit said 2019 and newer

  • @georgevillareal2381
    @georgevillareal2381 4 года назад +1

    What is the part number?

    • @jay_fast
      @jay_fast  4 года назад +1

      George Villareal
      www.indianmotorcycle.com/en-ca/shop/accessories/audio/2883690/

  • @joshc63111
    @joshc63111 5 лет назад +1

    What turn signals you got there

    • @jay_fast
      @jay_fast  5 лет назад +2

      billy ray reeses they are joker machine duel rat eyes

    • @joshc63111
      @joshc63111 5 лет назад +1

      @@jay_fast is a review on the future?

    • @jay_fast
      @jay_fast  5 лет назад +1

      billy ray reeses ya. And an install. The front are on. Obviously. Just haven’t done the rears yet. Bit more involved.

  • @sum1191
    @sum1191 3 года назад +1

    I’d still be trying to put that on. 😅

    • @jay_fast
      @jay_fast  3 года назад +1

      Nah. You’d kill it!

  • @guillaumepomarede8534
    @guillaumepomarede8534 5 лет назад +1

    I have instal one too but not indian model an amazone at 15€ it s works too just to plug on rapid conectors under the seat before use it

    • @jay_fast
      @jay_fast  5 лет назад +1

      Guillaume Pomarede ya. There are a lot of cheaper options. Some of them are probably better? I just saw it and liked it and thought I’d give it a go. Like I said in my opening. The $7 battery tender option worked great.

    • @guillaumepomarede8534
      @guillaumepomarede8534 5 лет назад +1

      I have a double USB 3A i think they all works but your s the official had a good look mine is fixed dehind the optique cover with the breack cable ! But i ll use few Times !!!
      I have install SnS Airborx + reprog stage 1 Indian at my Indian dealer ,i ll go to the dyno soon for the différence

    • @jay_fast
      @jay_fast  5 лет назад

      Guillaume Pomarede nice. You should see some difference. But to be honest the Indian tune still leaves a lot on the table. If you have to pay for that reflash save that money and spend it on a custom dyno tune or something from fuel moto

  • @photobiker4309
    @photobiker4309 5 лет назад +1

    While that looks nice and handy, it's above my price range just for a USB housing. I think I need to find a cheaper solution to the issue.

    • @jay_fast
      @jay_fast  5 лет назад +2

      Photo Biker open roader has a more cost effective method on his scout. You can search his videos and it should come up. It’s also a click able link in this video.

  • @cjschmitt4882
    @cjschmitt4882 2 года назад +1

    Sure messed up that 'front then rear', eh!!!! ;)

  • @hoymikey
    @hoymikey 3 года назад +1

    Damn 2017 indian scout sixty not applicable 😭

    • @jay_fast
      @jay_fast  3 года назад +1

      Really? I wonder what the difference is?

    • @hoymikey
      @hoymikey 3 года назад

      @@jay_fast juat saw the compatibility in your video in the manual

  • @BlackbirdSSR
    @BlackbirdSSR 5 лет назад +1

    Eh, can't imagine riding the Scout Bobber long enough to need to recharge my cell phone. I'd have spent that money on something else.

    • @jay_fast
      @jay_fast  5 лет назад +1

      Chad Osiris for sure. My main reason was I’m heading to Southern California this July. That’s about 1000 miles each way. Wanted it to charge my gps and other devices.
      Like I said. I was using my tender end to charge. And that worked fine. Was cheap. $7. But hey. #fanboylife.
      Thanks for watching. Stick around. I have many more bobber mods coming.

    • @BlackbirdSSR
      @BlackbirdSSR 5 лет назад +1

      @@jay_fast Sounds like a fun trip!