This video was very helpful I had someone come out to try to fix my problem because my washer will not drain after a wash cycle the guy replaced the clutch and it started working again. I ran one cycle it was fine then I ran another cycle and ran into the same problem.
@ gotcha. Anytime there is water in the drum at the end I’m always suspicious of the drain pump being bad they are very problematic. They drain a lot of water. But pulling the codes and checking the pump will help.
@@LAapplianceguy I checked the pump the pump was fine when I pulled the codes that I saw from your video codes number 11, 12, and 13 are not working when I test it. Also when I attempt the drain and spin feature it does not work at all
New= Never ever worked. You have persistence. When that part ohm'ed out in spec I doubt I would have tried another one. Good on you. This is nuts. My dad was an old school Wall Street stock broker in the 60's early 70's. He switched to insurance but always invested. He was really good made multi 7 figures just on investing.Couldn't change a light bulb though. lol He would try to teach me but it just seemed so boring to me. I wish that weren't the case. Thankfully my dads gene skipped me and my soon off to law school son has it. He's already investing. It's so important and I like researching useless things. I would rather watch a country boy fix a washing machine I will never own. Lawd help me! :)
@@scotts4125 yeah pops said hey you might as well try one since you are right there. And I’m glad I did. Because i would’ve looked stupid if i had put a board on. Ive been selling options for a while now. Making pretty good money on the side. Hey a little help now days is a plus. Life has gotten expensive pretty fast it seems. As always thanks for the positive feedback. And same here. I don’t think I’ll own any of these types of units anytime soon. I’ll still to the old school as long as I can. 👍
@@LAapplianceguy I have a friend you actually kind of resemble him. He's from Yazoo City MS. Man can he turn that accent on. Screamer and yeller in court very effective too. Won huge jury trials. He's a pretty sharp atty. He could do all kinds of complex math problems in his head. He's a huge risk taker and did some stuff he probably shouldn't have. Anywho he got really into options. I don't understand any of it myself. He was always talking about puts and calls. He swears his Merrill Lynch broker at the time was in on some conspiracy against him with a family member. Once again I don't understand this stuff so just repeating what I remember. He would leverage himself in something and another person would somehow counter his exacts moves. He would double down and it started to piss him off. Instead of stopping he goes balls deep to the point of being $250,000 grand in the hole. He filed ethics complaints against Merrill Lynch and the broker. I think he also filed bankruptcy. Life happened and we didn't keep in touch so I don't know the eventual outcome. He was disbarred for some other stuff but probably the smartest most fun guy I ever met. I miss you James.
@@jonmichaelnorthington7133 gotta take the 1/4” screws out the back of the control panel and the. The two under it going down. Then there are clips holding the front
I've tried to get the codes, but no matter how many times I hold the on button and turn the knob 7 times, it doesn't work. The machine just starts on whatever setting it lands on.
@@ausseamore8386 I tried and tried again. And just put one on for the heck of it. And it worked. I have no clue why. I’m still wondering about this one. 😂 those are the ones you wake up thinking about. Why did it test fine but not work. 🤦♂️
Not a fan of these fancy high end GEs, notorious for exploding. Also tend to have more problems than the more basic ages, they also don’t have a proper rinse cycle even with fabric softener and extra rinse on. To do a spin before rinse you have to use the sanitize cycle or something. This is not a good machine. Not a fan of the new Profiles.
This video was very helpful I had someone come out to try to fix my problem because my washer will not drain after a wash cycle the guy replaced the clutch and it started working again. I ran one cycle it was fine then I ran another cycle and ran into the same problem.
@@DianaClairee it’s not draining Like it’s full of water? Or it’s drained but the clothes are still wet and haven’t spun out at the end?
@ my clothes are fully saturated and there is a lot of water left in the drum
@ gotcha. Anytime there is water in the drum at the end I’m always suspicious of the drain pump being bad they are very problematic. They drain a lot of water. But pulling the codes and checking the pump will help.
@ this is another GE washer video this one wouldn’t drain ruclips.net/video/aVMy2BNrcKg/видео.htmlsi=RdaYbmbRdMgcdeV0
@@LAapplianceguy I checked the pump the pump was fine when I pulled the codes that I saw from your video codes number 11, 12, and 13 are not working when I test it. Also when I attempt the drain and spin feature it does not work at all
New= Never ever worked. You have persistence. When that part ohm'ed out in spec I doubt I would have tried another one. Good on you.
This is nuts. My dad was an old school Wall Street stock broker in the 60's early 70's. He switched to insurance but always invested. He was really good made multi 7 figures just on investing.Couldn't change a light bulb though. lol He would try to teach me but it just seemed so boring to me. I wish that weren't the case. Thankfully my dads gene skipped me and my soon off to law school son has it. He's already investing. It's so important and I like researching useless things. I would rather watch a country boy fix a washing machine I will never own. Lawd help me! :)
@@scotts4125 yeah pops said hey you might as well try one since you are right there. And I’m glad I did. Because i would’ve looked stupid if i had put a board on.
Ive been selling options for a while now. Making pretty good money on the side. Hey a little help now days is a plus. Life has gotten expensive pretty fast it seems.
As always thanks for the positive feedback. And same here. I don’t think I’ll own any of these types of units anytime soon. I’ll still to the old school as long as I can. 👍
@@LAapplianceguy I have a friend you actually kind of resemble him. He's from Yazoo City MS. Man can he turn that accent on. Screamer and yeller in court very effective too. Won huge jury trials. He's a pretty sharp atty. He could do all kinds of complex math problems in his head. He's a huge risk taker and did some stuff he probably shouldn't have. Anywho he got really into options. I don't understand any of it myself. He was always talking about puts and calls.
He swears his Merrill Lynch broker at the time was in on some conspiracy against him with a family member. Once again I don't understand this stuff so just repeating what I remember. He would leverage himself in something and another person would somehow counter his exacts moves. He would double down and it started to piss him off. Instead of stopping he goes balls deep to the point of being $250,000 grand in the hole. He filed ethics complaints against Merrill Lynch and the broker. I think he also filed bankruptcy. Life happened and we didn't keep in touch so I don't know the eventual outcome. He was disbarred for some other stuff but probably the smartest most fun guy I ever met. I miss you James.
How do you find your diagnostic manual if its not there?
@@cecilbrown6905 oh no. sometimes you can find them online. Sometimes they are in the control panel up top too.
How do you take the lid off of these washers?
@@jonmichaelnorthington7133 gotta take the 1/4” screws out the back of the control panel and the. The two under it going down. Then there are clips holding the front
Hey can you please post a picture of the error codes I got mine from a scratch and dent and can’t find my error code list
@@DianaClairee yes I’ll try and remember tomorrow when I get into work. 👍
Thank you so much
Does it have a loud noise in spin cycle?
@@homeguestunton no surprised the gearcase was good on this one 😂
I've tried to get the codes, but no matter how many times I hold the on button and turn the knob 7 times, it doesn't work. The machine just starts on whatever setting it lands on.
@@SequoiaKC maybe it’s different. Are you holding “power on” or start. It has to be start. Did you find the tech newspaper under the bottom?
Someone said if you're not testing you're just guessing
@@ausseamore8386 I tried and tried again. And just put one on for the heck of it. And it worked. I have no clue why. I’m still wondering about this one. 😂 those are the ones you wake up thinking about. Why did it test fine but not work. 🤦♂️
Not a fan of these fancy high end GEs, notorious for exploding. Also tend to have more problems than the more basic ages, they also don’t have a proper rinse cycle even with fabric softener and extra rinse on. To do a spin before rinse you have to use the sanitize cycle or something. This is not a good machine. Not a fan of the new Profiles.
@@coolrobuxgaming 100% same here. Leaves dirt in the drum because the rinse is terrible. Like the Samsungs
So weird to me.
@LAapplianceguy I just went and bought this ge profile .model did I make the wrong pick????
@@ppooz no it will work and do the job. Common issues are lid locks on all these units
@@ppooz Not the best but better than some others. The rinse cycle on these is horrendous. No spin before rinse. Remember that.
I need a keyword
@@RetireonDividends ok I gotcha. Next video I’ll throw one out. This one was definitely popswins 😂
@@LAapplianceguy Is that the same as a safe word?
@@scotts4125 😂 yes similar but not the same 😝