I did a bonnet at the weekend and it’s got so much orange peel. I just used G360 which has improved it and was going to wet sand with just 1500 but having seen this I’m going to try your method. Thanks.
its a good system, but instead of compounding after, i would go one step above to 3000k grit, or even more, it really cuts a lot of your buffing time, after sanding polishing will be child's play.
This is what I want to know.. if you’ve never done it, what exactly is it you’re looking to remove? I’ve noticed from the videos it tends to go an overall flat greyish colour? So when that looks flat I’m assuming it’s done.. The last thing I’d want is to do it all, then polish with a wool pad and there’s still defect everywhere
Svaka čast i hvala na podjeljenom znanju. Koja je potrošnja papira npr kad bi se radila kompletna hauba, odstranjivanje orange peel-a? Koje su recimo tri paste u tri cjenovna razreda koje bi preporučio?
Great video amd detailing… quick question sir … where can I get that adapter you’re using on your DEWALT polisher/sander (connecting pad with machine adapter) ? I’d like something like that so I can use on my machines that currently use a 5/16 screw in attachment . Can you help with a recommendation for an adapter I would be able to use to interchange so I can use a variety of pads with all my machines … tyvm
Pozdrav Alen, koliko ti tog prozirnog laka skineš. Nevidim da lak mjeriš ipak sa 1500 papirom brzo možeš proči. Ja želim isto prič na šlifanje zato pitam. Ali mislio sam sa 3000 da to radim jer me sa 1500 strah . Lp.
Upravo sam pogledo to me je interesovalo. Kako sam skužio mašinom se neskida toliko kao ručno jer je mašina samo 3mm hub. Još nisam isprobo jer sam tek materijal narućio pa ču na jednoj staroj haubi isprobati. Imo sam mercedesa za poliranje i probo sam na jednom mjestu 6 puta polirat sa vunom i grubom pastom nisam 5my laka skino. Jedan lakir me savjetovo da probam šlifat da se slobodno usudim jer se poliri boje šlifanja. A ja u tvom video vidim da si ti oko 20my skino u roku 5minuta
I always have scratches after sanding..i never tried those sand paper... i repaintes 7 times...even with a small orange peel..after i sand it...i have scratches and the compound polish can't remove them. Do you also have scratches? Because i can't see it on the video.
everything depends on how the coating dries, it can be sanded immediately after painting, but in my opinion it is best to sand after 35 days, when all the material has done its job
Thank you for your videos. One question: which interface pad do you use for sanding orange peel with Assilex? Do you always use the soft one (is it Kovax 971-0091?) or also the hard one in some cases?
Could you give some advice about the speed of the machine for sanding? I use à pneumatic sanding machine, wet sanding with trizact 1500, 2000, 3000 Thank you
So why don't you have a vacuum cleaner h(hose) attached to the sander so it removes the dust? And lining op de holes in the discs without a vacuum cleaner attached to the sander is comical 🤣😂😅
Orange peel has nothing to do with too little clear coat. It's from application (not enough pressure, improper overlap, distance, temperature, etc.) Thin wet coats are fine
@@mark7218 i use koch chemie heavy quick compound, it says it removes up to 1200 grit sanding marks. After i refine the 1000 grit sand marks up to 2000-3000grit the compound should still remove all the sanding marks correct?
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Does it matter orbital or random orbital sander? Also the sanding paper and sander flap is hard is that ok
Do you have to put a layer of clear coat now
I did a bonnet at the weekend and it’s got so much orange peel. I just used G360 which has improved it and was going to wet sand with just 1500 but having seen this I’m going to try your method. Thanks.
its a good system, but instead of compounding after, i would go one step above to 3000k grit, or even more, it really cuts a lot of your buffing time, after sanding polishing will be child's play.
Saludos. Un disco de 1500 te da para lijar todo un vehículo? O se necesitan más de uno. Gracias por tu respuesta
10 paper need
Es recomendable usar más de 1 disco ya que el primero se va a ensuciar muy rápido y no es bueno pulir con el mismo sucio....puede rayar el clear.
Exactly what I needed!
How do you know when to stop with 2000? Look for sanding scratches from 1500, or just have a standard number of passes?
This is what I want to know.. if you’ve never done it, what exactly is it you’re looking to remove? I’ve noticed from the videos it tends to go an overall flat greyish colour? So when that looks flat I’m assuming it’s done..
The last thing I’d want is to do it all, then polish with a wool pad and there’s still defect everywhere
Outstanding work Alan as always mate, love your work 👏
Tnx bro
Anytime mate, we can finally get this compounds in Australia I'm excited to get hold of them and get to work with them. 🙏🙏🤙🤙
nice finish. what speed do you use on the rotary polisher.
Tnx 1200 rpm
Good work
Svaka čast i hvala na podjeljenom znanju. Koja je potrošnja papira npr kad bi se radila kompletna hauba, odstranjivanje orange peel-a?
Koje su recimo tri paste u tri cjenovna razreda koje bi preporučio?
2 papir 1500 i 2 papira 2000,paste svake rade ali treba znati raditi sa njima
@@Amddetailing hvala na odgovoru, pratim kanal i skupljam znanje, puno sreće u radu!
Awesome work my friend 🤩👊
WHAT RPM DO YOU RUN
How do I clean some dust from auto paint before I lay down clear? Most vids show it after clear is down, but I havent sprayed clear yet.
Don't you still need to use a medium and final cut polish?
Yes ,you need
Great video amd detailing… quick question sir … where can I get that adapter you’re using on your DEWALT polisher/sander (connecting pad with machine adapter) ? I’d like something like that so I can use on my machines that currently use a 5/16 screw in attachment . Can you help with a recommendation for an adapter I would be able to use to interchange so I can use a variety of pads with all my machines … tyvm
what brand wool pad you use?
Ewocar
@@Amddetailing and where can buy kovak paper?
Kovax official page or ebay,or who is the representative for your country
In order to achieve this level of finish, do you have to sand with the Mirka sander? Is it possible to sand by hand and get the same result?
Yes, it could be, block sanding and water with help of a light because you can see when its gone
Pozdrav Alen,
koliko ti tog prozirnog laka skineš. Nevidim da lak mjeriš ipak sa 1500 papirom brzo možeš proči. Ja želim isto prič na šlifanje zato pitam. Ali mislio sam sa 3000 da to radim jer me sa 1500 strah .
Lp.
Imas u ovome videu koliko se skisa sa Kovax papirom
ruclips.net/video/YxPEMvCy1yQ/видео.html
Upravo sam pogledo to me je interesovalo. Kako sam skužio mašinom se neskida toliko kao ručno jer je mašina samo 3mm hub. Još nisam isprobo jer sam tek materijal narućio pa ču na jednoj staroj haubi isprobati. Imo sam mercedesa za poliranje i probo sam na jednom mjestu 6 puta polirat sa vunom i grubom pastom nisam 5my laka skino. Jedan lakir me savjetovo da probam šlifat da se slobodno usudim jer se poliri boje šlifanja. A ja u tvom video vidim da si ti oko 20my skino u roku 5minuta
I always have scratches after sanding..i never tried those sand paper... i repaintes 7 times...even with a small orange peel..after i sand it...i have scratches and the compound polish can't remove them. Do you also have scratches? Because i can't see it on the video.
How many days do we have to wait after painting to remove the orange peel
everything depends on how the coating dries, it can be sanded immediately after painting, but in my opinion it is best to sand after 35 days, when all the material has done its job
@@Amddetailing Thanks
Is this effective for soft paint?
the effect is the same for both soft and hard
Hand sanded 1500 grit, small area , used orange pad with meguiars compound, I still see sand marks , what can correct this
Roto maschine and wool
Great job
cannot find that kovax soft sponge anywhere...
Contact KOVAX official page
Good job
But why you didnt fix the fish eye too?
Because someone already tried and ruined it, I couldn't do it
@@Amddetailing i see
My last question, can you do dry sanding using da polisher or rotary?
@@mandalaputradeny4166 NO
Hallo bro... Why u dont use 2.5 orbit?
the same is explained in the video, because this one is more durable than 2.5
How do you stop the pigtails.
Use interface, no pressure
Thank you for your videos.
One question: which interface pad do you use for sanding orange peel with Assilex? Do you always use the soft one (is it Kovax 971-0091?) or also the hard one in some cases?
from 1000 to 2000 always a soft
All of car panel doing sanding bro ?
Great videos. Would you use Deros for wet sanding?
Yes
Nice job! I am going to do thé same opérations with trizact disks on my wife’s car :)
Could you give some advice about the speed of the machine for sanding? I use à pneumatic sanding machine, wet sanding with trizact 1500, 2000, 3000
Thank you
Why not work down to the next polish and then wax?
The car with ceramic coating is finished
wow so 1500, 2000, Wool and thats it😊, its soo many pads to choose i get confused
Yes
@@Amddetailing thank for responding you have the best channel for learning ... can i use my festool instead of mirka sander.
@@suspensefulness yes,you cant
@@Amddetailing thank u soo glad i subbed and learning dry sander ,way better than wet
Mano gosto muito dos seus vídeos!!!
Gostaria muito de aprender sobre o lixamento que você usa .
Mais tá complicado entender sua língua.
Kovax sistem
So why don't you have a vacuum cleaner h(hose) attached to the sander so it removes the dust? And lining op de holes in the discs without a vacuum cleaner attached to the sander is comical 🤣😂😅
ovaj limar koji je ovo radil bi si trebao nač drugi hoby..
100%
Wow! How hot was the hood? lol 7:10
Looked bad even after buffing
much better than it was
Doktore
Hvala brate😉
❤️❤️❤️👌👌👌👌👌👌👌
Looks like out Mercedes factory paint. The car has an orange Peel, because there isn‘t enough clear coate.
The entire front part of the car is not factory painted
Orange peel has nothing to do with too little clear coat. It's from application (not enough pressure, improper overlap, distance, temperature, etc.) Thin wet coats are fine
looks like a lot of trash got in the paint. good luck.
Sad
Aap.apna.nambar.de.do.mujhee.sending.maseen.magaani.hai.aapsea
I swear i followed all of your steps exactly as you said, but the orange peel isnt being removed clearly. What am I doing wronggg? Please help
Try 1000 grit first
@@mark7218 i use koch chemie heavy quick compound, it says it removes up to 1200 grit sanding marks. After i refine the 1000 grit sand marks up to 2000-3000grit the compound should still remove all the sanding marks correct?