2007 C230 Benz- Solution if your key will not unlock steering wheel or turn ignition switch.
HTML-код
- Опубликовано: 30 сен 2019
- I will show you how I removed the ESL and ignition switch from the dash of a 2007 C230 Sport Mercedes without removing the steering wheel and the column. This is a very common problem with these cars. If your key is NOT turning in the ignition switch most likely it is the ignition switch or the electronic steering lock (ESL). In my case it was the ESL only.
Авто/Мото
Thank you very much it's a great video thank you for your time and don't think whatsoever about empty shells they are everywhere
Your welcome, sorry for the late reply. Hope this was helpful!
Thank you for such a nice video, I still didn .t get to see how remove it. I got stuck on how to remove it.
can i ask you from were did you bought the new ESL please?
If I get a new eis do I have to program it? Or does it start. My key is new my ignition is new but my eis isn’t l.
Very helpful I have a 1999 e320 doing the same thing.. and No One seems to have the k owledge about this
why did you have to remove the center consule? when the esl in on the steering colume?
Do you have to program the new ignition switch to the steering lock? I changed the ignition switch on my c230 but still the key won't turn.
Yes you do.
Hi great video, what kind of tool do you used to get the pin out? How did you remove it? I watched a lot videos but I think they were newest benz, are totally different to a 04, 07 C240 and is not that easy to get the ESL, even the steering column out, your video help me a lot thx.
Thank you very much for your response and feedback! I actually used a Dremel tool with a cutting wheel to cut the pins :) It requires laying on your back and looking up at the ignition lock on the steering column.
I put some tin foil down on the floor of the car to protect the carpet from sparks as you cut. It doesn't take too long to cut them :)
I'm looking at a E500 with this issue. The key won't turn and the steering lock does not engage. Nice to know where to start looking.
Hope this helps you. Let me know if you have further questions :)
not posible to get the esl off the colum removing just the ping without the drilling?? thnks!!
I think this is the only way to remove it unless you remove the steering column.
Would a e430 be the same way I'm having the exact same problem ordered new 300$ fob and nuthing not even a lil bit won't turn or anything
Hey Steve I would suspect that you have the same problem. Hope this gets you going again 🙏
Thank you 🙏
You’re welcome 😊
Cac you show me the other end of the esl
I need to take the steering lock off but I certainly don’t want to tear it open like you did.
Well when you know your going to replace it, this is a way faster method then going the other route.
@@drivingthebenz802 what's the other route?
Thank you
Your welcome, glad it helped
my local dealership is saying I need to tow it in to get this all done? how do you go about reprogramming it?
It came with a reprogramming key. Hope this helps!
Many people seen on RUclips can synchronize all 3 components if you remove them and send them in or get lucky with a locksmith, only 1 I know is in Dallas.
Hello there,hope u are well, i had the same problem with a C180 and was looking how to take this F*** pin off, I bought the whole starting kit to replace it, do you know if once the whole system be changed i will have to sync something? it should works?
I would only be guessing, but I would think if you bought the part from Mercedes it would be synced to your car. Sorry for the delay and hope your up and running. Stay safe!
@@drivingthebenz802 thanks for your answer, I already change the whole start kit and works perfectly 👍
@@nicolasavalosorellana269 Glad to hear that! It's actually not that bad of a job once your done :)
No it's not that bad at all! Fun actually! There was no way I was going to pull the steering wheel off and do it that way. I'm Glad you got it working 👍. Did yours come with the temporary programming key?
@@drivingthebenz802 no, actually i bought the kit by eBay and it came with the proper key
I bought my ESL at the dealership. You'll need proof that your the owner. Hope this helps!
Hi how much did you pay for the ESL at the dealership?
Why not tell everyone that it didn't work? The new esl has to be programmed to the ignition and key.
that was my thought @@jeffmccain9204
them pins twist out ..just saying use a torx 5 or a awl twist n pull ..next time maybee
What you mean
can you help me my key wasn't turning 😥
Did you get it working?
Ezl with ecu prog
Check out This Historic Transatlantic cruise retracing the Titanic
ruclips.net/video/BHzr0pVP8jA/видео.html
Wasted a sh*t ton of money on what should have been a simple ESL fix. Get a ESL from the junkyard. Move your control board over to the new lock. Done.
Absolutely no way I'm going to replace it. Bypass it with an emulator altogether so you never get stranded out again.
That will work too! 👍
When u get a emulator does that have to be programmed as well
Does it have to be programmed?
@@tcal9230did you program yours
If I get a new eis do I have to program it? Or does it start. My key is new my ignition is new but my eis isn’t
If I get a new eis do I have to program it? Or does it start. My key is new my ignition is new but my eis isn’t
If I get a new eis do I have to program it? Or does it start. My key is new my ignition is new but my eis isn’t
If I get a new eis do I have to program it? Or does it start. My key is new my ignition is new but my eis isn’t