Это видео недоступно.
Сожалеем об этом.
Painting 3D Prints Tutorial Series 1 of 5 - Priming Models - Painting Techniques
HTML-код
- Опубликовано: 17 авг 2024
- ✨✨Get the Airbrush Essentials for Beginners Course PLUS the PSI Range Finder for FREE! ✨✨
(for a limited time)
➡️➡️ itsmeadmade.th... ⬅️⬅️
JOIN THE FREE RUclips COMMUNITY DISCORD HERE:
🔴 / discord
JOIN THE PATREON HERE - LEARN EVEN MORE ABOUT PAINTING:
🔴 / itsmeadmade
This is the first of five videos in the Painting 3D Prints series. I cover all the basics that will give you the skills and techniques to paint any 3D printed model from start to finish.
The tutorial starts at the very beginning when your 3D print is finished and fresh off the print bed. Then I explain and show all the steps of post-processing and preparing your raw print for primer.
I talk about the type of sandpaper I use, if and when I sand a 3D print, and then I get into the most important part - how to prime your model for painting.
Priming your 3D print is a crucial step to do before attempting to paint the print.
When it comes to 3D prints, the primer provides a base for the other paints to adhere to. The paint goes on much easier with a primer coat and sets you up for success with your 3D printed masterpiece.
If you liked this tutorial, please watch the rest of the series, subscribe, and post your questions in the comments.
1. Priming: • Painting 3D Prints Tut...
2. Paint Thinning & Color Blocking: • Painting 3D Prints Tut...
3. Ink Washes & DIY Recipe: • Painting 3D Prints Tut...
4. Dry Brushing Techniques: • Painting 3D Prints Tut...
5. Daubing Techniques: • Painting 3D Prints Tut...
Each part of this series builds upon the one before it, so if you started in the middle be sure to go back to the beginning to see every step along the way. I used the same model from start to finish. I hope you enjoy watching how to go from the raw 3D print to a work of art!
Here is the spray paint I recommend:
Filler and Sandable Spray Paint: amzn.to/2N4ISf1
2x Primer: amzn.to/3rC2Htj
----
3D print Slicer I use:
ultimaker.com/...
My Cura Slicer Setting Video:
• My Cura Profile Settin...
3D Printers I own and recommend:
Creality Ender 3:
amzn.to/2OKFHJO
Creality Ender 3 Pro:
amzn.to/3vetq11
Creality CR-10s:
amzn.to/3l4nQK4
Ender 3 and Ender 3 Pro Upgrades:
Glass Bed:
amzn.to/3czNgvx
Capricorn Bowden Tube:
amzn.to/2PTjN83
Ender 3 Pro Silent Motherboard:
amzn.to/3epNuHR
Tools I use for 3D Printing:
Get Perfect Bed Level:
amzn.to/38tDsBR
Glue Sticks for Adhesion:
amzn.to/2PO54uV
Small Plyer Set to Remove Supports:
amzn.to/3rC1a6u
Follow Me on Instagram: / itsmeadmade
Website: www.itsmeadmade...
Music from: www.bensounds.com
This is exactly the type of video I’ve been looking for. This helped out a lot, thanks.
That’s great! I’m so glad it could help you out!
this is the exact guide i've been looking for for my 3D PLA prints. Will definitely be checking out the rest of the series. Thanks for the video!
Awesome! Glad you found it. I have another beginners series as well where I do a full model start to finish. Both will help you from start to finish.
Just what I was looking for. I have troubles of fading out the layer lines of my miniature models, I've to try if that primer does the trick.
Those layer lines my friend are called Z binding, check it out there are many solutions for that, I'm sure you'll find your solution! Great prints by the way!
Yeah. I had a setting wrong. Thanks for the tip!
Quick question for you. They sell that primer in paint and primer combo in the one can. Can I use that or specifically primer only?
when spraying models always attach them to a stick so you can have more mobility with the models.
Thanks so much I wasn’t sure how to work with primer/coating. About how long did you wait for a layer to dry?
Awesome glad it helped you.
I typically give it 24 hours to cure fully. If your in a rush you can add your base coat after 4-5 hours.
thanks fo useful information, can i have 3d model of color holder located back of table ? it is so good idea to put colors and saving area
Love your videos keep it up learning a lot from you. Quick question, I read an Amazon review saying that the Vallejo primer dries fast on the airbrush tip. Have you ran into this problem? Or would you recommend adding a little bit of “flow aid” to the primer? What camera set up do you use a go pro or digital camera? Thanks
Thanks a lot! As for the primer. I have used it a lot and it has happened to me a few times but it was cause I had to leave my booth for a few mins and come back. So if you don’t let it sit it’s just fine goes on great. You always can use flow aid it will never hurt your paints.
As for camera my iPhone 11 and iPhone X is what I shoot on.
do you have a tutorial on using filler primer on resin prints?
thank you much
Great prints. Could you tell me what layer height do you use?
If I recall it was .08 mm
@@ItsMeaDMaDe thanks
Hello, first of all thanks for the great series. I would also like to start painting soon and this helps me a lot. I noticed that your Hulk has veins on his chest, my version of Eastman doesn't have them, how come
I know that Eastman had two available in his patreon and this one was the hd version. Hope that helps. Best of luck to you with your future painting!!
What racks are you using for storing the paint bottles in the back?
I printed them from thingiverse here is the file.
www.thingiverse.com/thing:2616639
This was informative, thank you. Off topic can I ask you, is the paint racks you have on your desk 3D printed? If so do you have a link to the files? Now on to your painting video
Thanks so much! I’m really glad it was helpful for you.
To answer your question there is websites that you can go to get the stl files. Just search in Google stl for whatever you're looking for an example of the search would be Hulk stl
I almost used an entire can on two models with base. Not sore if I overused my can to waste.
Thanks u so much, like and suscribe
is the dotted rought looking texture after using primer normal? woudl u sand it after priming?
Yeah depending this wasn’t the best print in the world but I was focusing on painting. I sometimes sand my prints. But be cautious cause you can sand away the details.
wait so this is printed on an fdm printer? how is it so clean and detailed it looks like a resin print?
Oh man. This isn’t really some of my best printing. Lots of layer lines in the face. But yes it’s FDM. I made a series on how to set up good Cura settings a week ago that might help you out.
@@ItsMeaDMaDe thank you! i was really stuck because i wanted detail but didn't want to deal with resin, this is blowing my mind. i'll check out your other vid!
@@hpavil No Problem! I hope the Cura Series helps you. Here is the link to the series:
ruclips.net/p/PLv65CP2QM2rFHMu6OGJVkwC3ictFhB00n
What do you do about the layer lines?
You can sand them with sand paper. But doing that can remove the details. Primer helps too if you use the fillable and sandable kinds. This model turned out bad with lines but I just used it anyway. A lot of that can be fixed in the print settings.
My friend just gave me two dice towers that he printed and they look great but I'm not sure how to prime the hard to reach inner parts of the towers. Do I just spray and pray (Pun intended) that I reach all the parts?
Honestly for something like that… yeah if your using a rattle can. You can also try to get to it with a brush. On the other hand if you can’t see it does it really need paint? 🤷
@@ItsMeaDMaDe It's made from bright red plastic so you can see it quite well. But I've also never primed anything before so I'm just very nervous because I'm such a perfectionist and scared of hating it if it doesn’t look just like I pictured it
@@elmsigreen then I’d try to just get in there with a brush.
Can I put primer again after already primed and dried it?
Yes you can add multiple coats if you want.
@@ItsMeaDMaDe thank you so much for an answer!
No worries glad to help
PLA, PETG...or does it matter?
Nope all paints the same.
I have the neptune 3 max. I wannna make figures but when i orint one. They take 15 hours or more. Is there a way u can help me please with settings.
It will work better if you have it print slower and at a lower layer height. Just have it print overnight and don’t worry about it. 15 hours ain’t bad at all. My latest one ran for 32 hours
@FenzerMX may I ask, do u have ig or fb? Can u help me? I'm having issues. And I'm ready to break my machine. Lol
I finished doing a hulk sculpture, let me know if you would like to use it to paint. I can send it to you. If you look through my youtube if anything you want i can send to you.
wouldve liked to see a bit more about the vallejo primer as i wanna work indoors on a workbench and avoid the nasty fumes of spray cans but i dont know if i need to add anything to that primer like thinner, flow improver, or retarder to get it to lay down good on prints. guess ill just wing it. 🤞
There a profile setting file for the busts?