Just got one for my 2008 GSXR 750 and it worked great besides the smaller starter cover at the top leaked a lot. So I swapped out the cap and o-ring with my OEM parts I just removed and no more leak. For the stator cover, I used the aftermarket gasket that came with it with some silicone gasket maker. Which I found out later they say not to use it with a gasket but it worked out. Also the backside of the starter that pushes onto the starter with an o-ring was all painted inside which made the clearance off and I had to sand the paint off on the inside for it to fit. It also didn’t go on as far back as the OEM cover which made me nervous so I also put more gasket maker on that. And the flat surface on the back of the stator cover that the gasket sits on had paint on two different spots that I had to carefully sand off in case it caused a leak from an uneven surface. Overall mine worked out with some extra work and this was really due to the fact that I had a track day in two days. If you have the money, I’d go with an OEM or high end aftermarket cover.
had the same problem now mine is leaking from somewhere Idk where though but yea I had to sand it down a lot I over filled my oil had a ton of white smoke and emptied some out and I'm just ready to ride again lol but the leak is coming from somewhere I gotta figure that one out
Just ordered this cover for my 07 gsxr 750 and im waiting on it now.did it leak any? I was kind of skeptical at first when buying it but for 45$ i was taking the chance
@@THEBOILEDONE I didn’t have that problem with mine but try not to use nothing too sharp like a razor blade.... 3000 grit sand paper should work ... very light pressure
Just got one for my 2008 GSXR 750 and it worked great besides the smaller starter cover at the top leaked a lot. So I swapped out the cap and o-ring with my OEM parts I just removed and no more leak. For the stator cover, I used the aftermarket gasket that came with it with some silicone gasket maker. Which I found out later they say not to use it with a gasket but it worked out. Also the backside of the starter that pushes onto the starter with an o-ring was all painted inside which made the clearance off and I had to sand the paint off on the inside for it to fit. It also didn’t go on as far back as the OEM cover which made me nervous so I also put more gasket maker on that. And the flat surface on the back of the stator cover that the gasket sits on had paint on two different spots that I had to carefully sand off in case it caused a leak from an uneven surface. Overall mine worked out with some extra work and this was really due to the fact that I had a track day in two days. If you have the money, I’d go with an OEM or high end aftermarket cover.
Glad to help
had the same problem now mine is leaking from somewhere Idk where though but yea I had to sand it down a lot I over filled my oil had a ton of white smoke and emptied some out and I'm just ready to ride again lol but the leak is coming from somewhere I gotta figure that one out
@@art_by_adrian2913 nice, best of luck finding your leak!
@AustinWalle thanks so much I need it lol I completely stripped it down and just finished rebuilding so we shall see how it goes
@@AustinWollI’m having a leak coming from my stator cover do you think it’s the cover and the bolts are tight enough and needs to be replaced ?
Make sure to lock Tite those 3 inside stator bolts too. They come loose inside the housing, can tear shit up.
Is that the one off Amazon?
No …eBay
Yo I bought this and my there’s no thread for the “fill plug” . Yours had it ?
It's a little hex screw stuck down in there I freaked out too lol
@@art_by_adrian2913 dude i found out after like a couple weeks lol it was so fucken annoying I thought it didint have a thread
Just ordered this cover for my 07 gsxr 750 and im waiting on it now.did it leak any? I was kind of skeptical at first when buying it but for 45$ i was taking the chance
No problem make sure you buy OEM gasket .. don’t use that aftermarket one that comes with it
Thanks man yeah I got the OEM gasket and o ring for the starter cover
@@THEBOILEDONE good
Hey man i got my cover today and there is paint around the gasket surface.do i need to sand the paint off?
@@THEBOILEDONE I didn’t have that problem with mine but try not to use nothing too sharp like a razor blade.... 3000 grit sand paper should work ... very light pressure
That the one off eBay?
Yes
@@uslipping how you like it? Looking into getting one for my 750. Found a small leak off my old cover
@@chrisnoname3829 bike ran fine after that