How to replace the Stator on Suzuki GSXR 600 and 750 models

In this video I replace the stator cover on a 2018 GSXR 750. This process will be the same for most of the late model 750s and 600s. 2006 - 2019.
Subscribe for more great motorcycle content: / @empcycleworks
Check out our website at www.empcycleworks.com/
Watch our most recent videos here: / @empcycleworks
Check out our Engine Performance Playlist: • Engine Performance
Checkout out Suspension playlist: • Suspension
Social Media Links:
Facebook: / empcycleworks
Instagram: / empcycleworks

[@ecrusch]

Really appreciate you sharing your knowledge to help others .
Thanks,
Eric in Kissimme.

[@empcycleworks]

Thank you for watching

[@mxatoms]

thank you so so much for the detailed video. had no problems and am back on the road

[@empcycleworks]

Glad it helped!

[@nicoreato2271]

Thanks you for this video, i changed the stator whitout problem! Bye bye from Italy 🇮🇹🇮🇹🇮🇹

[@GooseRider808]

Thanks for the video it helped me change mine. I should have listened to the torque wrench aspect cause I broke off the bolt head to one of the top stator cover bolts. Not too big a deal as it doesn’t leak and it’s hidden by the fairing so I’ll just end up riding it until I either attempt to remove the broken bolt or just get a new stator cover and actually use a torque wrench this time

[@ApSykesThewolf]

This is a throw in the dark, but if im guessing right, south bay? Id be down to take a look, supply parts, will tinker

[@jayjohnson7245]

this was great video. thanks

[@empcycleworks]

Thanks for watching

[@christianhernandez9659]

I’m having and issues where I’m getting no power to my fuel pump after replacing it and I took a picture of it when I took it out so I can install it back properly. I was only able to get it to prime once before that issue began

[@garybelone3611]

How much does the replacement stator cover cost?

[@CannabisJones]

you should link to the torque specs and any products used to make it easier for me to find.

[@DevonteSV]

Amazing video and break down. Ive got a small leak around the stator. I used gasket filler. What could be causing this issue?

[@empcycleworks]

The cover might be warped. Check it for flatness in a piece of glass

[@luizgustavoantunes]

Hey Bro, i have an k8 gsxr 1000, do you know If i can buy an k7 ir k9 stator to replace the k8 one?

[@empcycleworks]

Sorry I do not. Best to call the dealer.

[@joshuaprice4675]

Could this part keep the engine from actually starting turning over to an idle? I have an K4 600. Ive got fuel, air and spark. Cranks all day long just wont run.

[@manthenasriyashwanthvarma4037]

Probably the relay fam

[@Mizdarrr]

will the stator cover leak if you don’t use any gasket sealer?

[@empcycleworks]

It can at the seam

[@dmnce8549]

Quick lock tite would be best to use? I hear red and you mentioned blue so I’m congmfused

[@empcycleworks]

Red for fasteners that are going into steel. Blue for aluminum. This is a general rule with exceptions

[@dmnce8549]

@@empcycleworks thanks man I appreciate your reply

[@MrLafinest1]

Do not over tighten these bolts I broke off the oil galley bolt now I'm down until the new stator cover and bolt comes in. 3 dollars for the bolt and 11 dollars to ship it! Already was down a week waiting on the stator and rectifier now almost another week 😔😔😔

[@empcycleworks]

Thanks for the comment

[@ibrahimmuhammad4194]

After installing the stator, I hear a sound coming from it. What do you think the issue is?

[@empcycleworks]

Probably installed wrong

[@enjoytheride1377]

My bike headlight flickers at about 8/10k rpm and above when I’m going through the gears. What could be the issue ?
2018 GSX-R1000
Thank you.

[@empcycleworks]

Probably the regulator. But I would check battery connections first

[@devinrudolph4522]

Where do those two hoses that connect to the gas tank go?

[@thatr6814]

Did u figure it out?

[@devinrudolph4522]

@@thatr6814 yeah it just breather tubes don’t connect to anything they just kinda hang around lol

[@ThoughtTorch]

Is the procedure the same for my 2005?

[@empcycleworks]

Should be similar

[@brendenwyant8470]

i just replaced mine now its has a really slow start i charged the battery but i dont know what im doing wrong

[@empcycleworks]

The battery could be the issue

[@empcycleworks]

Also could be the starter

[@rabbitskin411]

I just fixed an oil leak on my K7 750 stator cover. After assembling, bike drags when cranking to a point where i got to push to get it running. Battery is good had it checked out. Starter all good as well. Any ideas? Im thinking it could be a bad earthing cable somewhere but I did not mess with any wiring.

[@dannyzukko8916]

In my ststaer cover i had 3 washers 😮😮 1 before the bearing and 2 at the very end after the idler pulley 😮😮😮😮 you said that is only suppose to have 2 ?!

[@empcycleworks]

I don’t remember on this particular motorcycle. Look up the parts fiche for your specific make and model