How to paint a car using base coat / clear coat and the best way to set up your gun for clear!
HTML-код
- Опубликовано: 7 сен 2024
- In this episode I'll share how to paint your car with base coat clear coat and the best way to set up your gun for clear. With this technique anyone can lay down clear coat like glass. follow along as I walk you through the steps to applying a tri stage pearl white Finnish with mixing instructions tips and tricks for better results. This video will certainly help you with your repair or restoration project.
How to video's
⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Tips and tricks when painting a car
• TIPS and TRICKS when p...
Beginners guide to Autobody playlist
• beginners guide to aut...
My amazon affiliate store : Tools and materials categorized to help you find what your looking for
CLICK HERE
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
www.amazon.com...
In this video
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
vevor r802 paint gun
amzn.to/3Zp7T4N
gunnbud spray gun light
amzn.to/3IeJLKu
3m cubitron2 xtract 320 grit
amzn.to/3xwRpLB
3m cubitron2 xtract 180 grit
amzn.to/3Ibjn4b
3m cubitron2 xtract 80 grit
amzn.to/3XCrGMg
upol clearcoat
amzn.to/3XhGtgj
upol 2k primer
amzn.to/3OzRRQZ
low cost disposable cup system 1.0
amzn.to/3PfhKWs
astro sun light
amzn.to/3YbFFtT
premium tack cloths
amzn.to/3FK35zw
prep solvent
amzn.to/3FCoRl7
raven latex gloves
amzn.to/3BsiGBb
3m paint mask
amzn.to/3UP7NQP
70% isopropyl alcohol
amzn.to/3uCCy0F
If you find this video helpful be sure to let me know in the comments. I welcome your feedback and questions
SUPPORT THE CHANNEL
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
LIKE AND SHARE VIDEOS
SUBSCRIBE!
COMMENT!
AFFILIATE LINKS!
www.amazon.com...
Business Inquiries: okpaintworx@gmail.com
Follow us on Instagram and get the scoop on upcoming projects!
/ garagenoise247
Follow us on Tik tok
vm.tiktok.com/...
video equipment I use
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Rode wireless go
amzn.to/3xpJDAW
Dji osmo action
amzn.to/3cCjdUD
Disclaimer:
Due to factors beyond the control of Garage Noise, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Noise assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Garage Noise, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Noise.
A headlamp on the gun cup, Bloody Genius!!!
Since I have not sprayed a clear coat as of yet your info is great. Very much appreciated. You are a good teacher.
I appreciate that!
Hey Chris some really good info there and I like the way you explain what you are doing and why you do it at each step along the way it makes it a lot easier to follow👌
That budget gun does an amazing job at laying the base and the clear as the finish is really nice, seeing as you are not in a booth your jobs always seem to come out very clean👏👏👍John UK
Happy it was helpful brother! Appreciate the support!
Yeah I'm going to try your way hope it works for me I got some runs today I got to fix it I'm so mad now
I watch your videos all the time good job excellent information 👍
I appreciate that! Thanks for the support!
Great video learn a lot
Awesome I'm in the learning process thanks to your videos
Appreciate the comment and support! Your welcome!
Looks good. Two coats of base and a drop coat. Metallic paints I use the cross spray technique.
Right on! Appreciate the comment and support!
Great job.....and explanation !! Love this channel !!
Thank's David, appreciate the comment and support!
Looks beautiful great job thank you 👍
Thank's Joan appreciate the comment and support!
Good video. Thanks for all the great tips.
Thank's Bud!
So many good tips in this video. Thankyou.
You're so welcome! Appreciate the comment and support!
Nice looking good 👍
Thanks 👍
Great teaching video. I owned an aircraft paint shop and would have to teach the guys the right way to prep and paint before they attacked a major job. I wish I had this video then. One little trick on the proper fluid volume. Turn off the air and then note the fluid stream…make it just less than a full stream. This also tells you about your reducer amount on a high solids paint.
Right on! Appreciate the comment and support!
Another great tutorial!
Thank's brother!
I use Sata-95 for base and a Iwata for clear. I don't use the light on the spray gun. I like to do collision work, body work, primer, prep work, buffing black paints.
👍
Top job, Mate.
👍
Perfect
👍
Awesome job!
Thanks! Appreciate the support!
Thank you very much for a detailed instructions! Great video. Do we need to address a dry edge created by the sealer? Thanks.
I don't really have a problem with the edge of sealer but I did use upol #9 blender on the edge. I didn't show it in this video.
@@GarageNoise 👍👍👍
Great video.
👍thank's Dan!
Awesome 👍
Thank's Dave! Appreciate the support!
Can you do a video showing gun prep/cleaning when switching from primer to sealer to base to clear etc..
Sure, will do!
Awesome work! Thank you for the tips 👍! I heard Devilbiss FLG-5 is a good spray gun! That you want give it a try!
Thank's brother! I heard the same thing about the flg5. Appreciate the comment and support!
Great video. Question for you How do you remove or lower the amount or remove the cloud that is in the air when spraying the clear coat. I'm in a garage not a booth
I have the perfect video on that topic! ruclips.net/video/At_WlTqXkt4/видео.html
Great video! Can you tell about the light you attached to the gun? Does it help to get even coats when you spray? I usually get decent results when my lighting is good but that's not always the case. I have never tried to attach a light to the spray gun...
I like it, mostly fore basecoat or if I'm clearing something low where I don't have enough light . It's only 60 bucks and comes in handy. Here's the link
amzn.to/3KI9GNK
How that clear coat is different from the standard Upol you normally use? How big of a job would be to decide which one?
It depends, I use the spot panel upol for most jobs because it dries a bit quicker. If your doing a full paint use the overall upol clearcoat it stays wet longer .
Hi when l paint my car white colour the colour it's change to cremi (yellow) what's problem
Not sure, the whole car or is it just a spot
Hi chris I used this primer and I let it dry over a week cause the wheather didnt permit when ivwas sanding it it was a nightmare it didnt dry i spent hours sanding it was clogging all my sand paper what else you used beside reducer to make it dry faster do u have any dryin issues or clogging the paper ? Whats a better primer option that will sand smooth easily ? Thanks again
What primer were you using?
You probably were using a 1k primer. If so get rid of it and use a 2k which is catalyzed so you won't have that issue.
would this video be applicable to a gun like the new version r500 ? that's what i have .
No, but I have plenty of video's sharing gun setting with the new R500
Can you show the name and brand of reducer you are using?
I use usc slow in this heat
amzn.to/3Au3s0Q
Chris is it possible to spray upol 2253 as a high build primer with the R500 or is that asking too much from the 1.7 tip? If so any settings would be appreciated.
1.7 would spray upol high build no problem. If you get alot of texture or orange peel it might be a little big so switch to the 1.5 if you have it. If you don't it's not a big deal the 1.7 will work. As far as the settings I would adjust you fan the width you like it and start with the fluid at 3 turns out from closed. The air pressure at about 15 to 18 psi. Appreciate the comment and support!
@@GarageNoise you are awesome. Youre videos have given me great start on how to use the R500 to its max potential.
👍
6:25
My base started to spider web. Does anyone why?
Sounds like a chemical reaction. Shoot a photo to my email I'll try to help ya out.
garagenoise247@gmail.com
The missing link was the fluid volume from close, i base coated today. Came out beautiful. Thanks
Ok, good to know . Happy it worked out.
Just did clear on the hood and it came out perfect a little dirt cuz I'm in the garage. Doing a g20 van . last thing to paint is that big panel on the drivers side. No windows . i be a little scared. Ill let u know.
@@davidgentz1731 awesome! Happy to hear it. Keep you spraying speed at a good pace and don't spray scared and you should have no problem on the g20.
Getting ready to do sealer and the biggest panel how long can I let that sealer go before I put the base on I got some other things I got to do can I go 36 hours? I turn down the heat in the garage a few hours after spraying.
@@davidgentz1731 check your TDS (technical data sheet) for the product your using. 36hrs may be to long to wait. Typically tje longest you should wait is 24 hrs. After that you need to scuff it up again before basecoat. I like to stay within a 4 hour window.