Elevate Your CNC Game: Climb vs. Conventional Explained
HTML-код
- Опубликовано: 2 авг 2024
- Hello CNC Makers! Welcome back to TimberFalls, your trusted hub for all things CNC routing and woodworking. In this episode, we're unraveling the details of Climb Milling and Conventional Milling - two essential techniques that every CNC maker should know like the back of their hand.
Dive in with us as we break down these methods, examine their pros and cons, and share insights on when to use which technique to achieve the best results in your projects. From seasoned makers to those just embarking on their CNC journey, this video is designed to refine your skills and deepen your understanding of effective milling.
Don't forget to give us a thumbs up if you find this content valuable, share with your CNC maker community, and subscribe to TimberFalls for more CNC-focused content. #TimberFalls #CNCMakers #CNCrouting #climbmilling #conventionalmilling
JENNY BITS 10% DISCOUNT CODE = TIMBERFALLS
Cadence Manufacturing & Design www.cadencemfgdesign.com/?ref...
CARVECO PRODUCTS 5% DISCOUNT CODE = TIMBERFALLS
store-us.carveco.com/?ref=Tim...
Use this discount to get 5% OFF!!
Check out our custom made STL models on our Etsy Store
www.etsy.com/shop/TimberfallsUS
Stuff I buy from Amazon Regularly
Danish oil amzn.to/3W5rmFK
Rubio Monocoat Oil Plus Pure amzn.to/3G1mLic
Sanding Discs amzn.to/3Yy8Oj5
amzn.to/3TD8yND
Respirator and filiters amzn.to/3C7LOOz
Hold down Clamps amzn.to/3hv1Wm5
For more info contact us @
www.Timberfalls.us
or
Facebook.com/Timberfalls.us
Short Guitar Clip by Audionautix is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...
00:00 Introduction
00:11 Defining Climb vs Conventional
00:56 Upmilling and Downmilling
03:08 Cutting forces
05:17 Conclusions 
Хобби
Thank you, as someone new to CNC I wasnt sure why Carveco defaulted for climb cutting as ive spent all of my woodworking life doing the opposite. This explained it perfectly and quickly!
I appreciate the feedback and am glad that helped. Let me know if there is something you would like to see covered more. I enjoy making these.
You by are by far one of the best I have seen when it comes to explaining the CNC and carveco. Thank you for that.
Thank you for the kind feedback. I am glad this has helped. Let me know if there is something you would like me to cover more.
I have been a subscriber for a while, never got notices about new videos. Failed to hit the notification bell. Corrected that, now I will get all your videos.
I should have another new one coming out soon. Thank you for your support I hope these hep.
bits rotate in one direction only, check the picture of your video, it looks very confusing
Yes but the toolpath can go either direction and is why you would pick climb vs conventional. This is confusing because the bit turns the same direction on the inside of a vector as the outside but because it is a different side of the bit cutting it requires different directions depending on what side of the line you are cutting. So you would need to pick the correct direction to get a climb or conventional cut to have the chips cut evacuate in the right direction. Hope this helps
CLIMB BETTER
For most situation I would agree. There are a few situations where conventional will give a better finish. I go over that towards the end of that one. Thanks for watching and the responses.